• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.142.2-142.2
• /
• 2013

The effect of substrate on catalytic activity of CO oxidation with transition metal Platinum nanoparticles on doped and undoped TiO2 was investigated. Titanium dioxide was doped chemically with non-metal anions including nitrogen and fluorine. Undoped TiO2 was synthesized via simple conventional sol-gel route. Thin films of titania were developed by spin coating technique and the characterization techniques SEM, XRD, UV-Vis Absorption Spectroscopy and XPS were carried out to examine the morphology of films, crystal phase, crystallites, optical properties and elemental composition respectively. XPS analysis from doped TiO2 confirmed that the nitrogen site were interstitial whereas fluorine was doped into TiO2 lattice substitutionally. Catalytic activity systems of Pt/doped-TiO2 and Pt/undoped-TiO2 were fabricated to reveal the strong metal-support interaction effect during catalytic activity of CO oxidation reactions. By arc plasma deposition technique, platinum nanoparticles with mean size of 2.7 nm were deposited on the thin films of doped and undoped titanium dioxide. The CO oxidation was performed with 40 Torr CO and 100 Torr O2 with 620 Torr He carrier gas. Turn over frequency was observed two to three folds enhancement in case of Pt/doped TiO2 as compared to Pt/TiO2. The electronic excitation and the oxygen vacancies that were formed with the doping process were the plausible reasons for the enhancement of catalytic activity.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.327-334
• /
• 2018

Water-repellent coating solutions were prepared by sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and thermally cured to prepare a non-fluorine water-repellent coating films. The effects of molar ratios of MTMS/TEOS, water concentration and ammonia concentration on the hydrophobic properties of the coating films were studied. The contact angle of water on coating films prepared by varying the molar ratio of MTMS/TEOS to 1~20 showed a maximum value of $108^{\circ}$ when the MTMS/TEOS molar ratio was 10. With increasing water content, the coating films showed the larger contact angles and the better the water repellency. As the amount of ammonia added was increased, the contact angles of coating films were increased, showing the better the water repellency. It is considered that the larger the amount of ammonia added, the larger the size of the silica particles generated, which increases the surface roughness of the silica particles, thereby increasing the water repellency.

• Applied Science and Convergence Technology
• /
• v.27 no.1
• /
• pp.9-13
• /
• 2018

Samples of anodic oxide film used in semiconductor and display manufacturing processes were prepared at different electrolyte temperatures to investigate the corrosion resistance. The anodic oxide film was grown on aluminum alloy 6061 by using a sulfuric acid ($H_2SO_4$) electrolyte of 1.5 M at $0^{\circ}C$, $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, and $20^{\circ}C$. The insulating properties of the samples were evaluated by measuring the breakdown voltage, which gradually increased from 0.43 kV ($0^{\circ}C$) to 0.52 kV ($5^{\circ}C$), 1.02 kV ($10^{\circ}C$), and 1.46 kV ($15^{\circ}C$) as the electrolyte temperature was increased from $0^{\circ}C$ to $15^{\circ}C$, but then decreased to 1.24 kV ($20^{\circ}C$). To evaluate the erosion of the film by fluorine plasma, the plasma erosion and the contamination particles were measured. The plasma erosion was evaluated by measuring the breakdown voltage after exposing the film to $CF_4/O_2/Ar$ and $NF_3/O_2/Ar$ plasmas. With exposure to $CF_4/O_2/Ar$ plasma, the breakdown voltage of the film slightly decreased at $0^{\circ}C$, by 0.41 kV; however, the breakdown voltage significantly decreased at $20^{\circ}C$, by 0.83 kV. With exposure to $NF_3/O_2/Ar$ plasma, the breakdown voltage of the film slightly decreased at $0^{\circ}C$, by 0.38 kV; however, the breakdown voltage significantly decreased at $20^{\circ}C$, by 0. 77 kV. In addition, for the entire temperature range, the breakdown voltage decreased more when sample was exposed to $NF_3/O_2/Ar$ plasma than to $CF_4/O_2/Ar$ plasma. The decrease of the breakdown voltage was lower in the anodic oxide film samples that were grown slowly at lower temperatures. The rate of breakdown voltage decrease after exposure to fluorine plasma was highest at $20^{\circ}C$, indicating that the anodic oxide film was most vulnerable to erosion by fluorine plasma at that temperature. Contamination particles generated by exposure to the $CF_4/O_2/Ar$ and $NF_3/O_2/Ar$ plasmas were measured on a real-time basis. The number of contamination particles generated after the exposure to the respective plasmas was lower at $5^{\circ}C$ and higher at $0^{\circ}C$. In particular, for the entire temperature range, about five times more contamination particles were generated with exposure to $NF_3/O_2/Ar$ plasma than for exposure to $CF_4/O_2/Ar$ plasma. Observation of the surface of the anodic oxide film showed that the pore size and density of the non-treated film sample increased with the increase of the temperature. The change of the surface after exposure to fluorine plasma was greatest at $0^{\circ}C$. The generation of contamination particles by fluorine plasma exposure for the anodic oxide film prepared in the present study was different from that of previous aluminum anodic oxide films.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.405-410
• /
• 2011

High-performance of an electric double layer capacitance (EDLC) electrode was prepared by the amino-fluorination of activated carbon by using $NF_3$ gas. The pore structure and surface chemistry were investigated based on the specific capacitance of EDLC. The amino-fluorination of activated carbon introduced functional groups of nitrogen and fluorine which are beneficial for the specific capacitance of EDLC without the change of pore structures. The E-NF100AC electrode, which has nitrogen and fluorine functional groups less than 1 at%, showed the highly improved specific capacitance of 528 (${\pm}9$) F/g at 2 mV/s showing 122% improved value when comparing with that of non-functionalized E-RAC electrodes. Whereas, the E-NF200AC electrode, which has nitrogen and fluorine functional groups over 1 at%, showed the decreased specific capacitance because of perfluorinated introduction. So, it is concluded that the proper contents of nitrogen and fluorine groups improved the specific capacitance of EDLC.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2973-2979
• /
• 2010

The newly synthesized homogeneous chiral Co(III) salen complexes were anchored non-covalently on the acidic sites of mesoporous Al-SBA-15. The Bronsted and Lewis acidic sites are attributed to the immobilization of fluorine functionalized chiral salen complexes on the supports. XRD, BET, TEM, FT-IR and ESCA (XPS) analyses were performed to characterize the property of support, and the structure of new homogeneous and heterogeneous chiral Co salen catalyst. The homogeneous and heterogeneous catalysts could be applied in asymmetric ring opening of epichlorohydrine (ECH) by water. They showed very high enantioselectivity and a good yield up to 99% in the catalytic synthesis of optically active products.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1771-1777
• /
• 2009

The homogeneous B$F_3$ containing chiral Co(III) salen complexes were anchored non-covalently on the surfaces of mesoporous SBA-16 silica containing aluminum species. The Brönsted and Lewis acidic sites are attributed to the immobilization of fluorine functionalized chiral salen complexes on the supports. The FT-IR, UV, ESCA, and NMR analyses were performed to determine the structure of synthesized chiral salen catalysts. These heterogeneous catalysts could be applied in asymmetric ring opening of terminal epoxides by water and phenol derivatives. They showed very high enantioselectivity and yield more than 98% in the catalytic synthesis of optically active products.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.26-32
• /
• 1985

Ten recommended rice varieties were cultivated in paddy area affected by air-pollutants and in normal area to select varieties adaptable to air-pollution environment. Rice plants grown in pollution site showed higher contents of total sulfur and fluorine in leaf through the whole growing period compared with those in non-pollution site, and rice leaves destroyed by air-pollutants were found only in pollution site. Rice grain yield and four yield components of ten rice varieties grown in pollution site were lower than those in normal area. Five rice varieties among ten were selected as adaptable to air-pollution environment, based on their yielding potential in pollution site and grain yield ratio between two sites. Rice varieties adaptable to pollution showed little variation of percent ripened grains and number of panicles per hill between two sites. Chlorophyll content in flag leaf of rice plants grown in pollution area was lower than in non-pollution area. No relationship was found between grain yield ratio (pollution/non-pollution site) of ten varieties and total sulfur content ratio, fluorine content ratio, chlorophyll content ratio between two sites, and percent destroyed leaf in pollution site, respectively. This result suggest that varietal adaptability to air-pollution environment is not related with the amount of pollutants absorbed, but with the degree of response to pollutants.

• Korean Journal of Materials Research
• /
• v.1 no.4
• /
• pp.214-220
• /
• 1991

The effects of $SiO_2$ reactive ion etching (RIE) in $CHF_{3/}C_2F_6$ on the surface properties of the underlying Si substrate were studied by X-ray photoelectron spectroscopy(XPS) and secondary ion mass spectrometry(SIMS) techniques. Angle-resolved XPS analysis was carried out as non-destructive depth profile one for investigating the chemical bonding states of silicion, carbon, oxygen and fluorine. The residue layer consists of C-F polymer. O-F bond was found on the top of the polymer layer and Si-O, Si-C and Si-F bonds were detected between Si substrate and polymer film. A 60nm thick damaged layer of silicon surface mainly contains carbon and fluorine.

• Journal of dental hygiene science
• /
• v.22 no.4
• /
• pp.215-221
• /
• 2022

Background: The purpose of this study is to investigate the pro-con of re-implementation by administrative areas and the difference in perception of community water fluoridation in implemented and non-implemented areas after the community water fluoridation in Korea was suspended. Through this, we intend to provide basic data that can help find ways to increase the support and interest of local residents. Methods: The 601 questionnaires collected through the survey and statistical analysis was conducted using SPSS Statistics 28.0. Results: As a result of analyzing the perception of the community water fluoridation according to the understanding of fluorine, the proportion of people who were not recognized by both fluorine and community water fluoridation was the highest (p<0.05). As a result of the analysis of the pro-con of re-implementation of community water fluoridation, the approval was high. Among those who responded in favor, the place of re-implementation showed that 'implementation nationwide' was high. As for the reason for favor, it was found that it was possible to prevent dental caries disease. The reason for the objection was the lack of knowledge about fluoride. Conclusion: The results of the survey for the pro-con of the re-implementation of community water fluoridation showed a higher degree of 'agree' and showed that people in the area where community water fluoridation was not implemented showed higher interest in oral health prevention and management. Through this, not only oral education, but also correct information on the implementation method of community water fluoridation, the benefits of community water fluoridation, and the facts that were misunderstood in the past, as well as oral education, can be provided to raise interest in community water fluoridation. It is thought that the expected effect of the re-implementation of community water fluoridation can be obtained if such activities are carried out.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.631-637
• /
• 2006

In this study, fundamental properties such as fresh and hardened performance of concrete mix(specification : 25-24-18) added fluorine-silicate hybrid based crack reducing agent(FS) were measured. Addition of FS ranged from 0.5% to 2.0% at intervals 0.5% based on cement weight. Adequate dosage(0.5%) of FS derived from basic properties measurements applied and compared resistance for shrinkage crack. The permeability of concrete in the absence(24-S-0.0) and presence(24-S-0.5) of evaluated at a mock-up sized concrete. Concrete added FS improved resistance for shrinkage crack and consequently crack number, length and area decreased to $50{\sim}74.4%$ compared non-added. As well, by the addition of FS, the resistance for permeability and penetration depth to concrete surface region increased 67% and 40%, respectively. Therefore it was confirmed that shrinkage crack resistance and permeability of concrete could be improved by the addition of FS.