• 소성∙가공
• /
• 제29권1호
• /
• pp.44-48
• /
• 2020

Aluminum nitride (AlN), as a substrate material in electronic packaging, has attracted considerable attention over the last few decades because of its excellent properties, which include high thermal conductivity, a coefficient of thermal expansion that matches well with that of silicon, and a moderately low dielectric constant. AlN films with c-axis orientation and thermal conductivity characteristics were deposited by using Pulsed Laser Deposition (PLD). The epitaxial AlN films were grown on sapphire (c-Al₂O₃) single crystals by PLD with AlN target and Y₂O₃ doped AlN target. A comparison of different targets associated with AlN films deposited by PLD was presented with particular emphasis on thermal conductivity properties. The quality of AlN films was found to strongly depend on the growth temperature that was exerted during deposition. AlN thin films deposited using Y₂O₃-AlN targets doped with sintering additives showed relatively higher thermal conductivity than while using pure AlN targets. AlN thin films deposited at 600℃ were confirmed to have highly c-axis orientation and thermal conductivity of 39.413 W/mK.

• 한국환경농학회지
• /
• 제5권1호
• /
• pp.43-47
• /
• 1986

온산(溫山)공업단지 조성(造成)에 따른 농작물(農作物)의 오염(汚染)가능성을 조사하기 위하여 1978년 3월부터 12월에 걸쳐 주변 농경지에서 재배된 농작물(農作物)(수도, 보리, 대두, 채소, 과일)중의 중금속 농도를 분석한 결과는 다음과 같다. 중금속 함량은 농작물의 종류, 부위, 재배지역에 따라 약간의 차이가 있었으나 일정한 경향은 찾아 볼 수 없었다. 분석한 농작물 시료의 평균치(平均値)를 보면(풍건물(風乾物)기준) As 0.23 ppm, Cd 0.46 ppm, Cu 4.88 ppm, Hg 0.09 ppm, Pb 3.86 ppm, Zn 41.3 ppm으로서 이 지역에 대한 자연함유량(自然含有量) 기준(基準)으로 이용할 수 있을 것이다.

• 소성∙가공
• /
• 제23권5호
• /
• pp.282-288
• /
• 2014

It is difficult to control welding variables during spot welding of non-ferrous metals like aluminum because of the low electrical resistance of the material. It has been suggested that a solid state welding process such as friction stir spot welding or extru-spot welding can be used to spot weld aluminum plates. In the extru-spot welding, there is a need to increase the weld strength by improving the shape of the welding die. The current study shows that the weld strength for an extru-spot welding can be increased by using a pin placed on the inside of the upper electrode in the welding die. In the current study, the deformed shape of the insert rivet and the stress distribution in the welding zone were analyzed by simulation. Extru-rivet spot welding experiments were performed by changing the height of pin on the inside of the upper electrode. From the experimental result, it is shown that the weld strength for an extru-rivet spot welding can be increased by adjusting the height of the pin. The optimal shape of the deformed rivet after the extru-rivet spot welding can be observed from the simulation results. The deformed shape of the insert rivet can also be controlled by the height of pin.

• 소성∙가공
• /
• 제31권5호
• /
• pp.290-295
• /
• 2022

Recently, the use of high-tech ceramic parts in functional electronic parts, automobile parts and semiconductor equipment parts is increasing. These ceramics materials are required to have high reproducibility, reliability, large size and complex shapes. The researchers initiated the work to develop a new shaping method called gel casting, which allows high performance ceramic materials with a complex shape to be produced. The manufacturing process parameters of gel casting include uniform mixing of the initiator, bubble removal, and slip injection. In this study, we analyzed the dispersion and gelation characteristics according to the change in the additive content of the alumina slurry in the gel casting process. The alumina slurry for gel casting was prepared by mixing a solvent, a monomer and a dispersant through a ball mill. Alumina powder and a gelation initiator were added to the mixed solution, and ball milling was performed for 24 hours. A viscosity of 6,435 cps and a stable zeta potential value were obtained under the conditions of alumina powder content of 55 vol% and dispersant 2.0 wt%. After curing for 12 hours by adding aps 0.1wt%, TEMED 0.2wt%, and Monomer 3, 5wt%, it was possible to separate from the molding cup, confirming that the gelation was completed.

• 자원리싸이클링
• /
• 제28권6호
• /
• pp.96-105
• /
• 2019

폐자동차파쇄잔재물(Automobile Shredder Residue, ASR)은 폐차 재활용시 발생되는 최종 폐기물로써 파분쇄, 공기분급, 자력선별 및 정전선별법과 같은 자원처리 공정을 이용하여 선별할 수 있다. 본 연구에서는 유도형 정전선별기를 이용하여 A SR의 선별효율 향상 및 예측을 위한 전도체(구리) 및 비전도체(유리)의 궤적분석이 수행되었다. 전도체의 궤적분석 결과, 0.5와 0.25 mm 조립자 구리선의 모사궤적은 실제궤적과 거의 일치하였다. 반면 0.06 mm 구리선의 관찰궤적은 (-) 전극으로 편향되었다. 이는 입자특성 및 상대습도에 의한 전하량의 영향 때문으로 판단된다. 비전도체의 경우 절연체 유리의 관찰궤적이 전도성 입자들의 궤적과 유사한 특징을 보이면서 (-) 전극으로 편향되었다. 현미경, SEM & EDS 분석결과 유리표면에서 미립의 철과 전도성 유기물과 같은 이물질 발견되었다. 이와 같이 이물질이 부착된 유리는 ASR 재활용을 위한 정전선별시 비철금속의 선별효율을 저하시키는 것으로판단된다. 향후 연구에서 유리에 부착된 이물질 제거를 위한 전처리 기술개발 및 개선된 궤적모사 연구가 요구된다.

• 자원리싸이클링
• /
• 제19권6호
• /
• pp.11-26
• /
• 2010

일본의 도시광산자원과 금속재자원화산업을 파악하기 위하여, 일본(日本)의 금속소비량, 금속리싸이클리률을 논하고, 철스크랩, 사용이 끝난 자동차, 폐가전제품 및 폐전자정보기지 등의 대표적인 재자원화산업의 개요를 조사하였다. 일본은 금속자원 소비대국이고 각종 금속 축적량 대국이기도 하다. 도시광산자원의 리싸이클링률은 자급률로 계산할 때 Pb 50%, Fe 33%, Al 25%이고, Hg, Au, Cd, Mn, Mo, Ag 등이 이어지고 있다. 그러나 기능재료에 첨가되는 레어메탈 및 REE 등은 리싸이클링 기술개발 단계라고 할 수 있다. 자동차, 가전제품 PC 등 사용이 끝난 제품의 리싸이클링산업은 활발하고, 리사이클링률은 법정기준치를 상회하고 있다.

• 자원리싸이클링
• /
• 제28권5호
• /
• pp.30-41
• /
• 2019

아연의 전세계 생산량은 약 1,300만 톤 정도이며, 철, 알루미늄, 구리에 이어서 네 번째로 많이 사용되는 금속이다. 아연을 리사이클링하여 2차지금을 생산하는 경우 광석으로부터 1차지금을 생산하는데 필요한 에너지의 약 75 %를 절약할 수 있으며, $CO_2$ 발생량은 약 40 %를 절감할 수 있다. 그러나 아연의 주 용도가 철강재의 도금용이기 때문에 아연의 리사이클링율은 약 25 % 수준으로 다른 금속보다 낮은 수준이다. 아연의 리사이클링 원료에는 제강분진, 황동 제조시에 발생하는 분진, 비철금속의 제조공정에서 발생하는 슬러지, 아연 잉곳의 재용해나 용융아연도금을 할때 생성되는 드로스, 폐건전지, 그리고 금속성 스크랩 등이 있다. 제강분진과 폐건전지가 가장 활발하게 리사이클링 되고 있다. 이러한 리사이클링 공정의 대부분은 건식제련법을 응용하고 있으나, 최근에는 건식과 습식의 복합처리에 관해서도 많은 관심이 주어져 있다.

• Asian Journal of Atmospheric Environment
• /
• 제6권2호
• /
• pp.83-95
• /
• 2012

China has been a top producer and exporter of refined lead products in the world since the year 2000. After the phasing-out of leaded gasoline in the late 1990s, non-ferrous metallurgy and coal combustion have been identified as potential major sources of aerosol lead in China. This paper presents the single particle analytical results of ambient aerosol particles collected near a lead smelter using a scanning electron microscopy- energy dispersive x-ray spectroscopy (SEM-EDX). Aerosol particle samples were collected over a 24-hour period, starting from 8 pm on 31 May 2002, using a high volume TSP sampler. For this near source sample, 73 particles among 377 particles analyzed (accounting for 19.4%) were lead-containing particles mixed with other species (S, Cl, K, Ca, and/or C), which probably appeared to be from a nearby lead smelter. Lead-containing particles of less than $2{\mu}m$ size in the near source sample were most frequently encountered with the relative abundances of 42%. SEM-EDX analysis of individual standard particles, such as PbO, PbS, $PbSO_4$, $PbCl_2$, and $PbCO_3$, was also performed to assist in the clear identification of lead-containing aerosol particles. Lead-containing particles were frequently associated with arsenic and zinc, indicating that the smelter had emitted those species during the non-ferrous metallurgical process. The frequently encountered particles following the lead-containing particles were mineral dust particles, such as aluminosilicates (denoted as AlSi), $SiO_2$, and $CaCO_3$. Nitrate- and sulfate-containing particles were encountered frequently in $2-4{\mu}m$ size range, and existed mostly in the forms of $Ca(NO_3,SO_4)/C$, $(Mg,Ca)SO_4/C$, and $AlSi+(NO_3,SO_4)$. Particles containing metals (e.g., Fe, Cu, and As) in this near source sample had relative abundances of approximately 10%. Although the airborne particles collected near the lead smelter contained elevated levels of lead, other types of particles, such as $CaCO_3$-containing, carbonaceous, metal-containing, nitrates, sulfates, and fly-ash particles, showed the unique signatures of samples influenced by emissions from the lead smelter.

• 한국환경농학회지
• /
• 제4권2호
• /
• pp.88-94
• /
• 1985

온산(溫山)공업단지 조성(造成)에 따른 토양(土壤)의 오염(汚染)가능성을 조사하기 위하여 1978년 3월부터 1979년 5월말까지 수차에 걸쳐 공업단지 주변의 전답(田畓), 과수원 및 야산(野山)의 토양시료에 대하여 중금속 원소의 농도를 분석한 결과는 다음과 같다. 1) 농경지통양 46개지점의 중금속 농도(풍건물(風乾物) 기준)는 비소 흔적${\sim}9.3ppm$, 카드뮴 흔적${\sim}$0.6 ppm, 구리4${\sim}$22ppm, 수은 흔적${\sim}$0.37ppm, 납 6${\sim}$43ppm, 아연 27${\sim}$93ppm으로서 전국(全國) 논토양의 분석치와 비교할 때 중금속의 오염은 전혀 인정할 수 없었다. 2) 중금속 함량을 논, 밭, 과수원의 토양별로 비교한 결과 As, Cd, Cu, Zn은 토양에 따라 유의차(有意差)가 없었으나 Hg, Pb는 유의차(有意差)가 있었다. 공단내(工團內) 리단위(里單位)지역에 따른 중금속 함량을 비교한 결과 As, Cd, Hg는 유의차(有意差)가 없었으나 Cu, Pb, Zn은 유의차(有意差)가 있었다. 3) 금속제련소 인접지역에서는 아연제련소(亞鉛製鍊所)의 시운전(試運轉)중 사고에 의하여 Cd, Pb, Zn으로 오염(汚染)된 지점이 여러곳 관찰되었으나 정상가동(正常稼動)에 들어간 이후에는 오염이 더 이상 진행되지 않았다.

• 소성∙가공
• /
• 제27권1호
• /
• pp.48-53
• /
• 2018

Aluminum nitride (AlN) is used by the semiconductor industry that has requirements for high thermal conductivity. The theoretical thermal conductivity of single crystal AlN is 320W/mK. Whereas, the values measured for polycrystalline AlN ceramics range from 20 W/mK to 280 W/mK. The variability is strongly dependent upon the purity of the starting materials and non-uniform dispersibility of the sintering additive. The conventional AlN sintering additive used yttria ($Y_2O_3$), but the dispersibility of the powder in the mixing process was important. In this study, we investigated the mechanical and thermal conductivity of yttrium nitrate ($Y(NO_3)_3{\cdot}6H_2O$), as a sintering additive in order to improve the dispersibility of $Y_2O_3$. The sintering additives content was in the range of 2 to 4.5wt.%. The density of AlN gradually increased with increasing contents of sintering additive and the flexural strength gradually increased as well. The flexural strength of the sintered body containing 4 wt% of $Y_2O_3$ and $Y(NO_3)_3{\cdot}6H_2O$ was 334.1 MPa and 378.2 MPa, respectively. The thermal conductivities were 189.7W/mK and 209.4W/mK, respectively. In the case of hardness, there was only a slight difference and the average value was about 10 GPa. Therefore, densification, density and strength values were found to be proportional to its content. It was confirmed that AlN using $Y(NO_3)_3{\cdot}6H_2O$ displayed relatively higher thermal conductivity and mechanical properties than the $Y_2O_3$.