• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.114-120
• /
• 2017

In underdeveloped countries, many people suffer from water shortage due to the absence of water supply service. Although water purifiers have provided support in such situations, it is not easy to maintain water filters without a continuous supply of consumable filters. To obtain a sustainable drinking water source, appropriate technology of water treatment is necessary. Herein, a low cost water purification system was developed using natural raw materials. A non-electric water treatment system was developed using filtration through an Onggi filter, which is a type of Korean traditional earthenware with a microporous surface. The porosity and flux of the prepared Onggi filter were 29.06% and 31.63 LMH, respectively. After purification of water with total dissolved solids of 10.4 mg/L and turbidity of 100 NTU, the total dissolved solids and turbidity of the water treated using the Onggi filter decreased by 12% and 99.8%, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.467-476
• /
• 2013

Freeze concentration method has advantages of high thermodynamic efficiency, low energy consumption and purified water re-use. In this study, freeze concentration waste-water system which was designed as the small and medium sized capacity was analyzed about the rate of electric power consumption and the daily treatment capacity to suggest the direction of system development. At first, power consumption and operation time of the system with fresh water precooler or without it was calculated by computer modeling and analysis. Subsequently, the change of design treatment capacity was applied to the system with fresh water cooler. As a result, the rate of electric power consumption was higher as 0.6 Wh/kg but daily treatment capacity increased in quantity as 19 % in the system with fresh water precooler. As design treatment capacity increased, the rate of electric power consumption was lower and daily treatment capacity was larger in quantity.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.381-386
• /
• 2001

The dust generated from the electric arc furnace steel making process is classified as hazardous material by Korean Environmental Protection Acts, mainly because of the existence of water teachable Pb, Zn and Cd. Thus the treatment of EAF dust is being carried out to fulfill both the environmental aspect and recovery of valuable metals. To establish the proper process for recovering the valuable metals (Fe, Zn, Pb and Cd) and producing the non-toxic slag from EAF dust, using RAPID-10 system, feasibility study have been carried out. To find out the scale-up factor for designing the commercial scale EAF dust treatment process(capacity 50,000 ton EAF dust per year) entitled RAPID-50 system. The design and construction of RAPID-50 (RIST Arc Plasma Industrial Device) system for treating 50,000 ton of EAF dust per year is now undergoing. Overall plan for treating EAF dust generated in KOREA will be setup after successful operation (December, 2002) of RAPID-50 system.

• Korean Journal of Food Science and Technology
• /
• v.44 no.6
• /
• pp.704-710
• /
• 2012

This study was designed to investigate the effect of pulsed electric fields on the drying of ginseng and extraction of dried ginseng to reduce energy-consumption. Fresh ginseng was treated in a PEF system of 1 and 2 kV/cm electric field strength, 25 and 200 Hz of frequency, $30{\mu}s$ of pulse width and pulse number of 175. The samples were subsequently dried for 26 h at $55{\pm}1^{\circ}C$, and the characteristic of hot-water extraction on dried ginseng was investigated. The ginseng pretreated with an intensity of 2 kV/cm (200 Hz, n=175) resulted in a reduction of approximately 38% for drying time. The influence of PEF treatment on the water extraction of dried ginseng at $95{\pm}1^{\circ}C$ was also investigated. The application of an electric field intensity of 2 kV/cm (25 and 200 Hz, n=175) increased soluble solid content, significantly reducing sugar content and free sugar content of the extract compared to non-PEF-treated samples.