• 한국정보통신학회논문지
• /
• 제17권4호
• /
• pp.822-828
• /
• 2013

본 논문에서는 다양한 종류의 데이터가 발생할 수 있는 비파괴검사의 공정자동화를 위한 복합통신장치를 구현하고 검증한다. 여기서는 검사장비와 센서, 컴퓨터 등에서 발생된 제어신호, 텍스트형 데이터, 영상 데이터를 직렬통신, 이더넷, 동축케이블 등을 이용하여 복합통신장치에 전송하고 통신장치 간은 기간 전송매체인 전력선을 이용한다. 이를 위하여 구현된 장치는 여러 가지 통신이 가능하도록 다양한 포트와 이에 따른 인터페이스를 장착하고 있다. 실험결과 구현된 복합통신장치는 신호파형의 왜곡이 거의 없으면서도 일정한 전송속도를 유지하는 것으로 나타났다. 또한 주변 환경의 극심한 온도변화에 대해서도 정상적으로 동작함을 검증하였다. 따라서 본 논문에서 구현된 복합통신장치는 다양한 종류의 데이터가 발생될 수 있는 비파괴검사 공정의 자동화를 위한 전력선통신 기반 통신네트워크 구축에 크게 기여할 수 있을 것으로 판단된다.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.239-245
• /
• 2022

Using the fatigue limit (∆σ_unsm) and residual stress (σ_r) of the UNSM smooth specimen, the harmless maximum crack depth (a_hlm) according to the crack aspect ratio (As) was evaluated. In addition, the relationship between the minimum crack depth (a_NDI1, a_NDI2) detectable by non-destructive inspection(NDI), the crack depth (a₂₅, a₅₀) that reduces the fatigue limit by 25% and 50%, and a_hlm were evaluated. The harmless crack condition was determined by the deepest crack point (point A). Since a_hlm is larger than a₂₅ and a₅₀, a₂₅ and a₅₀ can secure the safety and reliability of steel via UNSM. Because a_NDI1 and a_NDI2 are larger than a₂₅ and a₅₀, cracks in a₂₅ and a₅₀ cannot be detected by non-destructive testing. Therefore it is necessary to apply more precise NDI.

• Journal of Mechanical Science and Technology
• /
• 제16권5호
• /
• pp.591-598
• /
• 2002

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.

• 항공우주기술
• /
• 제6권1호
• /
• pp.230-236
• /
• 2007

항공기용 복합재 구조물의 제작에 대한 품질관리는 자재의 입고에서부터 제품의 제작과정에 이르는 모든 단계에서의 검사, 시험 및 모니터링을 포함한다. 이러한 품질관리 활동은 설계의 목적에 적합하게 이루어졌는지 확인하기 위한 것이다. 품질에 영향을 미치는 인자들은 자재, 입고검사, 보관 및 시효관리, 작업환경의 관리, 시험, 검사 및 기록의 관리 등이 있다. 본 연구에서는 항공기 복합재 구조물에서 파괴시험을 통한 공정의 적합성 입증방법과 품질관리방법을 고찰하였으며 이를 바탕으로 복잡한 복합재 구조물에 대한 비파괴검사 방법의 신뢰성을 확보하고 복합재의 설계요구조건을 확인할 수 있는 기법을 제시하였다.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1482-1487
• /
• 2009

In this study statistical analysis was performed for NDI(Non-Destructive Inspection) results of F100 engine front seal support assembly. NDI results can be statistically considered as Quantal Response Data. It is found that the suitable probability distribution to the failure data is normal distribution through MLE(Maximum Likelihood Estimation) of the Quantal Response Data. Moreover, Cumulative Distribution Function, failure rate function and B-Life are calculated on the supposed distribution.

• 비파괴검사학회지
• /
• 제21권2호
• /
• pp.197-203
• /
• 2001

항공기나 대형 플랜트 등의 경년구조물에 있어서 제조 및 설계 혹은 작업환경 등에 의해 발생하는 미소결함은 응력부식파괴로 이어지는 결정적인 원인으로 알려져 있다. 따라서 제조단계에서의 결함의 검출뿐만 아니라 운전개지 후에 있어서도 비파괴검사에 기초를 둔 정기적인 건전성평가가 요구된다. 특히 구조물내의 미소균열 평가는 구조건전성 평가에 있어서 중요한 과제라 할 수 있다. 자기광학소자를 이용한 비파괴탐상법은 균열부근의 누설자속에 의한 자구 및 자벽의 변화를 이용하여 균열정보를 화상형태로 얻는다. 그러므로 빠른 탐상속도와 결과데이터 해석의 용이 그리고 실시간적으로 탐상결과를 획득할 수 있다는 장점을 지니고 있다. 본 논문은 자기광학소자를 이용한 새로운 비파괴적 탐상법을 제안하고, 본 탐상법을 이용하여 구조물에 존재하는 표면결함의 검출가능성 및 균열깊이의 평가를 실증하였다. 표면결함을 갖는 시험편과 파이프의 내면에 존재하는 피로균열을 대상으로 실험을 실시한 결과, 표면결함의 위치 및 2차원적 형상을 화상형식으로 얻을 수 있음을 증명하였다. 또한 피로시험중의 시험편을 대상으로 균열발생 및 균열진전과정을 평가를 통하여 원격탐상의 가능성을 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2862-2867
• /
• 2008

High-temperature components of gas turbine operated for certain period of time can be reused by being repaired or rejuvenated. In case of the gas turbine combustion liners, the biggest and the most important one in the high-temperature components, come in a repair shop after operated for 8,000 or 12,000 hours according to the model and go through the repair and rejuvenation in order to be reused. A stated combustion liner is the first channel which has the combustion gas reached a nozzle from a fuel nozzle. Materials and coating properties of old and new model combustion liners were investigated. To repair these components after the visual inspection, the coatings of combustion liners were removed and then FPI(Fluorescent Penetrant Inspection), a kind of the NDI(Non-Destructive Inspection), was conducted. Damage patterns and the number of the damaged components were classified and analyzed based on data provided from the visual inspection over a long period of time. Focusing on the difference between old model and new model combustion liners, we analyzed the damage distribution and changes and consequently concluded that new model combustion liner would increase repair rate.

• 한국항공운항학회지
• /
• 제11권2호
• /
• pp.33-42
• /
• 2003

In this paper, we propose an enhancement of the ultrasonic image for non-destructive inspection of aircraft composite materials. The ultrasonic images are corrupted by a speckle noise which has the characteristic of granular pattern noise and is in all types of coherent imaging systems, the signal independent and multiplicative noise. In this paper, we derive a filter, called the AWLF(Adaptive Window Log Filter), from the nature of the speckle. The filter is made of the MEAN Filter in the edge region and Log Filter in the flat or noise region. To make a distinction between edge and flat region, we calculate the inclination around the local window instead of computing the local statistics of pixels such as local mean ${\bar{M}}$ and standard deviation ${\sigma}_s$. According to the obtained region, edge region is performed by the mean filter and flat region by the Log filter. Performance of the proposed filter is evaluated by the Enhanced Factor$(F_e)$ and the Speckle Index(SI).

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1011-1017
• /
• 2023

In this study, the harmless crack size (a_hml) by double shot peening (DSP) using shot balls with different diameters was evaluated on carburized, quenched-tempered SCM822H steel. The minimum crack size (a_NDI) detectable by non-destructive inspection was also evaluated. The relationship between the crack size (a_25,50) that reduces the fatigue limit by 25% and 50% and a_hml was evaluated. The residual stress of DSP was greater in SP_(0.6+0.08) than SP_(0.8+0.08) and appeared deeper in the depth direction. In addition, the hardness below the surface appeared larger. The fatigue limit of DSP increased 2.07 times and 1.95 times compared to non-SP. All a_hml of the DSP specimen was determined at the depth (a). The compressive residual stress distribution affects a_hml, and the a_hml of SP_(0.6+0.08), which has a large compressive residual stress and a high fatigue limit, appeared large. a_hml of SP_(0.6+0.08) introduced deeper than the residual stress of SP_(0.8+0.08) is larger in the range of As=1.0-0.3. Since the residual stress in the thickness direction has a greater effect on a_hml than the residual stress at the surface, it is necessary to introduce it more deeply. The relation of a_hml, a_25,50, and a_NDI were evaluated in the point for safety and reliability.