• The Korean Journal of Blood Transfusion
• /
• v.23 no.2
• /
• pp.162-168
• /
• 2012

Background: Potassium, the most common cation in the intracellular space, plays a critical role in our physiology. Potassium imbalance may cause life-threatening problems, ranging from general weakness to cardiac arrest due to ventricular fibrillation. For emergency physicians, detection of such derangement within a short period of time is of critical importance. In this study, we wanted to determine whether analysis of whole blood samples can be used as a screening tool for potassium imbalance by comparative analysis of whole blood and serum samples. Methods: Two samples were drawn from 227 patients. The whole blood sample was taken from the radial artery and contained in a commercially available arterial blood collection syringe with a lithium-heparin coating. The serum sample was contained in a commercially available vacuum bottle in a non-additive silicone coated tube and transported to the laboratory. The study population was divided into three groups, patients with normal whole blood potassium, patients with decreased whole blood potassium, and patients with elevated whole blood potassium. Potassium levels for each group were coupled with serum potassium levels and compared. Results: No significant difference in potassium values was observed between whole blood and serum samples (P<0.05). Strong associations were observed among the three groups (normal range, hypokalemia, and hyperkalemia group). Compared to the normal group (r=0.851), the hyperkalemia group showed a stronger association between variables (r=0.897), and the hypokalemia group showed a weaker association (r=0.760). Their correlation coefficients were highly significant (P<0.05). Conclusion: Our study illustrates that point-of-care testing using whole blood with whole blood can be a reliable screening tool when treating patients with suspicious potassium abnormality, especially in hyperkalemia patients.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.489-496
• /
• 2019

This paper is a study on the evaluation of loss factor of damping treatment materials to reduce the noise and vibration for panels of railway vehicles and automobiles. In order to determine the modal parameters of damping materials, beam excitation tests were carried out using different type PVC coated aluminum and steel base beam specimens. The specimens were excited from 10 Hz to 1000 Hz frequency range using sinusoidal force, and transfer mobility data were measured by using an accelerometer. The loss factors were determined by using integrated program, based on theories of Half Power Method, Minimum Tangent Error Method, Minimum Angle Error Method and Phase Change Method, which enable to evaluate the parameters using modal circle fit and least squares error method. In the case of lower loss factor and data of linear characteristics, any method could be applied for evaluation of parameters, however the case of higher loss factor or data including non-linear characteristics, the minimum angle error method could reduce the loss factor evaluation. The obtained dynamic properties of the coating material could be used for application of Finite Element Method analyzing the noise control effects of complex structures such as carbody or under-floor boxes of rolling stock. The damping material will be very useful to control the structural noise, because the obtained modal loss factors of each mode show very good effect on over $2^{nd}$ mode frequency range.

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.77-96
• /
• 1993

This in vitro study was undertaken to observe whether citric acid application aids the attachment and proliferation of human periodontal ligament cells to the root surfaces of periodontally diseased teeth. The roots were prepared so that the comparison could be made among the control healthy root surface, citric acid demineralized and non-demineralized root planted surfaces. Prior to the cell attachment experiment, each groups were prepared for scanning electron microscopic (SEM) examinations of root surface morphology, All specimens were fixed with phosphate buffered glutaraldehydes, postfixed with phosphate buffered osmium tetraoxide and stained with phosphate buffered tannic acid. dehydrated in ethanol, critical point dried, sputter coated with gold and examined under the SEM. In the cell attachement experiment, human cultured periodontal ligament cells at concentration to $4.5{\times}\;10^4\;cells/ml$ were seeded in each culture well which contained prepared roots and incubated for 30min 1, 2, 6, 12 and 24 hours at 37, 5% $CO_2$air incubator. Than the specimens were prepared for SEM examination using, the same methods as described above. In the cell proliferation experiment, $5{\times}\;10^4\;cells/ml$ cells were seeded incubated with the specimens for 6 hours. Then, all of the specimens were moved into fresh culture well and incubated for 24, 48, and 72 hours. The cell counting was done after trypsinization, under light microscope. The results were as follows. When viewed the surface morphology prior to the cell attachment, the non acid treated root planed surface displayed scaling striation and occasional bacteria and calculus. The citric acid treated specimens displayed little debris on the surface and funnel shaped orifices of dentinal tubules. There were no apparent differences in the morphology of cells attached to the control and experiment groups. However, in initial attachement, there was a slight more enhanced appearance in attachment in citric acid treated groups than other root surfaces. After 6 hours of incubation, most of the cells initiated the alteration of cell morphology from ovoid to spindle shapes. After 24 hours of incubation, most of the cells displayed proliferated appearance and connected with each other via numerous processes. In the cell proliferation experiments, there were statistically significant increased number of cells in citic acid treated groups than other groups.

• Korean journal of food and cookery science
• /
• v.15 no.3
• /
• pp.264-271
• /
• 1999

This study was conducted to know the storage stability of Yackwa, a traditional Korean fried cookie, prepared by two different cooking methods; deep fat frying at 160$^{\circ}C$ for 8 min (DFF), and preheating Yackwa dough and then deep fat frying at 180$^{\circ}C$ for 2 min (MW/DFF). Soybean oil (SBO), hydrogenated soybean oil (HSBO) or hydrogenated palm oil (HPO) were used for frying Yackwa. Compared to Yackwa prepared by DFF, all MW/DFF Yackwa samples had low fat content and high moisture content. MW/DFF saved frying time 6 min compared with DFF. Non-hydrogenated soybean oil for frying fats was replaced with hydrogenated types of soybean oil and palm oil to improve the storage stability of Yackwa. To investigate the oxidation stability of Yackwa during the accelerated storage for 15 days at 60$^{\circ}C$, acid value, anisidine value, peroxide value and oxidation value of Yackwas were measured. Acid values of Yackwa made by MW/DFF were higher than those made by DFF through the whole storage periods, regardless of frying fats. Peroxide and anisidine values of Yackwa coated with syrup were much lower than those without syrup. MW/DFF cooking method, using hydrogenated soybean oil or hydrogenated palm oil for frying, showed lowering effects on peroxide value as well as anisidine value, resulting in improved oxidation stability of Yackwa during the storage. In sensory evaluation, the acceptability of MW/DFF Yackwa was higher than those of the commerical products. Yackwa prepared by MW/DFF cooking method using hydrogenated palm oil, showed the highest acceptability in color, taste and texture among the samples.

• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.229-241
• /
• 2008

Changes of growth and histopathological feature in the mantle structure of the equilateral venus, Gomphina veneriformis exposed to tribultyltin chloride (TBTCl) for 36 weeks were observed. Concentrations of TBTCl were 0, 0.4, 0.6, and $0.8{\mu}g/L$. A regression analysis by power function of SPSS was shown that the growth of experimental groups was significantly decreased after 12 weeks of exposure. For histological analysis, mantle tissues were characterized using H-E stain, AB-PAS (pH 2.5) reaction and Masson's trichrome stain, and epidermal layer thickness and mucous cell distribution were analysed using the image analyser. The mantle had 4-folds (inner-inner, inner-outer, middle, and outer) and its epidermal layer consisted of simple epithlia. A periostracum was observed in the periostracal groove between middle and outer fold. Inner epidermal layer consisted of simple ciliated columnar epithelia, but the outer epidermal layer consisted of simple non-ciliated columnar epithelia. Alcian blue positive mucous cells showed blue color (7462c, 653c) in the inner fold, violet color (2583c) in the middle fold, and blue color (647c, 7455c) in inner epidermal layer (numbers in the parenthesis are codes of Pantone process coated color). Hemolymph sinus in the mantle was extended, and mucous cells in inner plica of the middle fold were stained as blue (7455c) and violet (2587c), after 12 weeks of TBTCI exposure. Cilia and striated border were disappeared, and number of mucous cells in the inner epidermal layer was reduced. Serious histopathological changes in middle and outer fold near the periostracum were observed after 36 weeks. Moreover, epidermal layer thickness and mucous cell distribution were showed decreasing tendency as exposure time to TBTCI was increased. Results of this study suggested that TBTCl induced growth disorder with histopathological changes.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.9-19
• /
• 1995

This study was carried out to investigate the effect of sawdust bedding barn on manure handing, management labour and physiological aspect of dairy cows, and then to establish the criteria on the optimum utilization method of sawdust bedding barn. 46 tie stall barns and 49 sawdust bedding barns were surveyed to cmopare the milk productivity between two different barns, and also 5 tie stall barns, 15 sawdust bedding barns and 1 rice hull bedding barn were selected to study the utilization situation of sawdust barn in Kyung-Ki province area. The major results obtained were as follows; 1. The roof material of sawdust barn were consisted of 66% vinyl house, 23% PVC light and 11% slate and galvanum coated tin. Most of the floor structure was earth ground with the rate of the approximately 82%. 2. The average occupied area of sawdust bed per cow was 15.2 $m^2$, depth that 30 cm and the utilization period was 12 months. 3. Milk Yield was significantly higher at sawdust barn than at tie stall barn(P<0.01). Bacterial and somatic cell count in raw milk were less at the sawdust barn than in tie stall barn. However, there was not significance difference between two barns. 4. The labour hour needed to cow management in the sawdust barn was approximately 48% of that of tie stall barn. 5. The temperature and moisture content measured in sawdust bed were closely affected by seasonal ambient temperature. The skin and hair of cow were much cleaner at the PVC light roofed sawdust barn than any other roof materials. 6. The additives used for improving of fermentation did not show any effect on temperature and moisture content in sawdust bed. When the ambient temperature was $30.4^{\circ}C$, the surface temperature of measured 1 cm above the sawdust bed was $12.2^{\circ}C$ lower and the temperature of 100 cm above the sawdust bed was $2.4^{\circ}C lower under shading net facility than that of vinyl roofed one.7. The hoof length of miking cow was 7.95 cm in tie stall and 9.19 cm in sawdust barn with high significance (P<0.01). And disease occurence such as mastitis and foot-rot tended to decrease in the sawdust barn. 8. The number of total bacteria and coliform bacteria were less in the sawdust bed compared with earth ground resting area. And a parasite strongyloides papillosus was detected but without any infected cow. 9. The nitrate($NO_3N$) content in non-roofed earth ground resting area and earth ground under the sawdust bed was likely to pollute the ground water. 10. In economic point of view, rice hull bedding barn was the cheapest among different systems. And in the sawdust bedding barn PVC light + slate roofed barn was most desirable, and vinyl roofed one the least.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.547-555
• /
• 2009

This study was performed to determine the minimum dose of Poloxamer/Sodium alginate (PX/SA) mixture on preventing intraperitoneal adhesions to evaluate organ toxicity. Twenty five healthy adult mongrel dogs (weighing 4.68${\pm}$1.67 kg) were divided into five experimental groups composed of five dogs respectively; negative control group (NC, non-treated), positive control group (PC, 2% carboxymethyl chitosan solution treated), and experiment 1 group (E1, 0.25 ml PX/SA mixture of abraded area), experiment 2 group (E2, 0.5 ml PX/SA mixture of abraded area), experiment 3 group (E3, 1.0 ml PX/SA mixture of abraded area). Venous blood specimens were collected from all experimental animals for hematologic and biochemical analysis: WBC, fibrinogen, AST, ALT, ALP, BUN and creatinine. The anti-adhesion effect was evaluated using a serosa abrasion model. The denuded ileum was coated with PX/SA mixture, carboxymethyl chitosan solution or neither. The tensile strength of the adhesion site was evaluated with a tensiometer. For histopathological examination, tissue samples of the liver and kidney were collected from all dogs. According to the results, the frequency and tensile strength values for adhesion separation in PX/SA group were significantly lower than those in negative control group (p < 0.05). In E2 group, the tensile strength was significantly decreased in consideration of PX/SA dose. The values of AST, ALT, ALP, BUN and creatinine of the control and the experimental groups showed no statistical differences. No obvious microscopic differences were noted among tissue sections obtained from all groups. The results suggest that PX/SA mixture may be effective on reducing peritoneal adhesion formation in dog and that 0.5 ml PX/SA mixture of abraded area is most effective dose. Moreover, PX/SA mixture was considered not to have toxicity for the liver and the kidney.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Membrane Journal
• /
• v.25 no.5
• /
• pp.422-430
• /
• 2015

The present study announces that the pH value of seed coating solution makes a significant effect on the microstructure of silicalite-1 zeolite layer formed on ${\alpha}$-alumina support. Seed with an average diameter of 75 nm was dispersed in ethanol to prepare three kinds of seed coating solutions with different pH values, and dip-coated on the support. The pH value was controlled to be 2.2, 7.0, and 9.3, respectively. In the secondary growth process, pH 7 seed solution resulted an uniform, 3 to $4{\mu}m$ thick, completely covered, and 100 nm grained silicalite-1 zeolite separation layer. The uniformity and completeness were explained by a uniform, closely packed, multi-layered, and completely covered seed coating in the pH 7 condition. In the condition, ${\alpha}$-alumina support and seed are oppositely charged: support is positively charged (8.4 mV) and seed, negatively (-1.7 mV). The opposite charging induced a strong electrostatic attraction between seed and support, which made the good seed coating state. On the other hand, pH 2.2 and pH 9.3 seed solutions resulted non-uniform, partially covered, and around $1{\mu}m$ grained zeolite separation layer, since seed and support are the same sign charged in the conditions. The same sign charging induced a strong electrostatic repulsion between seed and support which caused a low coverage of seed. It could be concluded that the pH value of seed coating solution is a key parameter to determine the microstructure of silicalite-1 zeolite separation layer.