• 제목/요약/키워드: Non-circular

검색결과 649건 처리시간 0.021초

Stereoimage Optical Topometer System을 이용한 새로운 창상 계측 방법 (New Measurement Method of Wound Healing by Stereoimage Optical Topometer System)

  • 노경환;한승규;김우경
    • Archives of Plastic Surgery
    • /
    • 제35권6호
    • /
    • pp.755-758
    • /
    • 2008
  • Purpose: In order to determine the amount of wound healing, objective sequential assessments of changes in wound size and depth are essential. Although a variety of measurements for wound healing have been proposed, a gold standard for quantifying day-to-day changes in healing has not been established. We present here a simple and non-invasive wound measurement method that quantitatively and accurately documents changes of the size of a raw surface and the volume of a soft tissue defect using a stereoimage optical topometer(SOT) system. Methods: Using a 5mm diameter biopsy punch, four circular wounds were created on abdominal area of a diabetic mouse. Photographs were taken using SOT system at baseline, 5th day and 10th postoperative day. The wound margin was traced on a digitalized photo and evaluated the area and the volume of the wound by SOT system. Results: The SOT system calculated a mean wound surface of $15.93{\pm}0.29mm^2$ and volume of $827.50{\pm}88.86$ intensity/pixel${\times}$area(I/PA) immediately after wounding. On the 5th day after the operation wound surface declined by $10.73mm^2$ and on the 10th day declined by $5.95mm^2$. The wound volume also declined from 827.50 I/PA to 161.75 I/PA and 30.50 I/PA on 0, 5th and 10th day, respectively. Conclusion: The SOT system described in this study represents a reliable, simple, practical, and non-invasive technique to accurately monitor and evaluate wound healing.

공간구조물의 탄성 분기좌굴해석을 위한 수치해석 이론 개발 (A Development of Analytical Strategies for Elastic Bifurcation Buckling of the Spatial Structures)

  • 이경수;한상을
    • 한국강구조학회 논문집
    • /
    • 제21권6호
    • /
    • pp.563-574
    • /
    • 2009
  • 본 논문은 기하학적 비선형성을 가진 보존적 단일 하중 매개변수의 탄성 상태 공간구조의 탄성 분기 좌굴이론에 관한 수치 해석적 기본 방법 및 경로 추적, pin-pointing, 경로 전환을 기술하고 있다. 비선형 탄성 불안정 상태는 극한점과 분기점으로 분류될 수 있으며, 평형경로상의 평형점의 계산 및 평형경로상의 특이점을 찾기 위한 pin-pointing 반복계산을 수행하는 일반적인 비선형 수치해석법으로 극한점을 계산할 수 있다. 그러나 분기좌굴 해석을 위해서는 좌굴 후 분기경로의 추적을 위한 분기경로 전환 알고리즘이 추가적으로 필요하다. 본문에서는 에너지이론에 기초한 일반 탄성안정이론을 소개하고, 평형경로 추적, 다분기 좌굴점을 찾기 위한 간접법과 다분기의 경로 전환에 관한 이론을 전개한다. 분기좌굴 해석예제로 트러스로 이루어진 스타돔, 핀지지의 평면아치의 분기좌굴 해석을 수행하여 본문에서 제시한 수치해석법의 정확성 및 적용성을 검증한다.

Initial development of wireless acoustic emission sensor Motes for civil infrastructure state monitoring

  • Grosse, Christian U.;Glaser, Steven D.;Kruger, Markus
    • Smart Structures and Systems
    • /
    • 제6권3호
    • /
    • pp.197-209
    • /
    • 2010
  • The structural state of a bridge is currently examined by visual inspection or by wired sensor techniques, which are relatively expensive, vulnerable to inclement conditions, and time consuming to undertake. In contrast, wireless sensor networks are easy to deploy and flexible in application so that the network can adjust to the individual structure. Different sensing techniques have been used with such networks, but the acoustic emission technique has rarely been utilized. With the use of acoustic emission (AE) techniques it is possible to detect internal structural damage, from cracks propagating during the routine use of a structure, e.g. breakage of prestressing wires. To date, AE data analysis techniques are not appropriate for the requirements of a wireless network due to the very exact time synchronization needed between multiple sensors, and power consumption issues. To unleash the power of the acoustic emission technique on large, extended structures, recording and local analysis techniques need better algorithms to handle and reduce the immense amount of data generated. Preliminary results from utilizing a new concept called Acoustic Emission Array Processing to locally reduce data to information are presented. Results show that the azimuthal location of a seismic source can be successfully identified, using an array of six to eight poor-quality AE sensors arranged in a circular array approximately 200 mm in diameter. AE beamforming only requires very fine time synchronization of the sensors within a single array, relative timing between sensors of $1{\mu}s$ can easily be performed by a single Mote servicing the array. The method concentrates the essence of six to eight extended waveforms into a single value to be sent through the wireless network, resulting in power savings by avoiding extended radio transmission.

한국산 대륙송사리 Oryzias sinensis(Pisces: Adrianichthyidae) 후각기관의 해부 및 조직화학적 연구 (An Anatomical and Histochemical Study of the Olfactory Organ in Rice-fish Oryzias sinensis(Pisces: Adrianichthyidae) in South Korea)

  • 김현태;이용주;박종영
    • 한국어류학회지
    • /
    • 제28권4호
    • /
    • pp.223-228
    • /
    • 2016
  • 한국산 대륙송사리 Oryzias sinensis의 후각기관을 실체현미경과 광학현미경을 이용하여 해부 및 조직 화학적 특징들을 조사하였다. 전체적 구조에서 후각기관은 두부의 주둥이 위에 한 쌍으로 존재하였으며 다소 떨어져있는 전비공과 후비공, 한 개의 비강, 한 개의 비낭으로 구성되었다. 비강내 상피는 감각상피와 비감각상피층으로 구분되었다. 감각상피는 후감각세포, 지지세포, 기저세포 그리고 공포들로 구성되었다. 비감각상피는 층상상피 세포, 산성과 중성 점액세포들로 구성되었다. 비낭의 상피층은 층상상피세포와 배상세포들로 구성되었다. 결과적으로 이러한 대륙송사리의 후각기관의 해부 및 조직화학적 특징들은 농경지에서의 정체되고 오염되어있는 수환경을 반영하는 것으로 사료된다.

Design of a Compact Antenna Array for Satellite Navigation System Using Hybrid Matching Network

  • Lee, Juneseok;Cho, Jeahoon;Ha, Sang-Gyu;Choo, Hosung;Jung, Kyung-Young
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권5호
    • /
    • pp.2045-2049
    • /
    • 2018
  • An antenna arrays for a satellite navigation systems require more antenna elements to mitigate multiple jamming signals. In order to maintain the small array size while increasing the number of antenna elements, miniaturization technique is essential for antenna design. In this work, an electrically small circular microstrip patch antenna with a 3 dB hybrid coupler is designed as an element antenna, where the 3 dB hybrid coupler can yield the circularly polarized radiation characteristic. The miniaturized element antenna typically has too large capacitance in GPS L1 and GLONASS G1 bands, making it difficult to match with a single stand-alone non-Foster matching circuit (NFMC) in a stable state. Therefore, we propose a new matching technique, referred to as the hybrid matching method, which consists of a NFMC and a passive circuit. This passive tuning circuit manages reactance of antenna elements at an appropriate capacitance without a pole in the operating frequency range. The antenna array is fabricated, and the measured results show a reflection coefficient of less than -10 dB and an isolation of greater than 50 dB. In addition, peak gain of the proposed antenna is increased by 22.3 dB compared to the antenna without the hybrid matching network.

미소원공결함을 갖는 자동차 전류구동축재의 온도변화에 따른 피로크랙전파거동에 관한 연구 (A Study on the Fatigue Crack Propagation Behavior in F.F. Shaft Materials of Vehicle with Small Circular Defect at Variable Temperature)

  • 이상열;이동길;정재강
    • 한국자동차공학회논문집
    • /
    • 제6권6호
    • /
    • pp.185-194
    • /
    • 1998
  • In this study, the rotary bending fatigue test was carried out with two kinds of material, S43C and S50C, using in the Front engine and Front drive wheels(F.F.) of vehicle. The one part of specimens was heated by high frequency induction method(about 1mm depth and $H_RC$ 56~60) and tested environment temperature were $-30^{\circ}C$, $+25^{\circ}C$ and $+80^{\circ}C$ in order to look over the influence of the heat treatment and the temperatures. In the experimented result at $+25^{\circ}C$ and $+80^{\circ}C$, the fatigue life of non-heated specimens were decreased about 35%, but that of heated specimens were decreased about only 5% at $+80^{\circ}C$ more than at $25^{\circ}C$. And in the experiment result at $-30^{\circ}C$ and $+25^{\circ}C$, the non-heated and heated specimens were about 110%, 120% higher fatigue life at $-30^{\circ}C$ than at the $+25^{\circ}C$ each other. On the other hand, the fatigue crack propagation rate of S50C was higher than that of S43C.

  • PDF

Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer

  • Arani, Khosro Shahpoori;Zandi, Yousef;Pham, Binh Thai;Mu'azu, M.A.;Katebi, Javad;Mohammadhassani, Mohammad;Khalafi, Seyedamirhesam;Mohamad, Edy Tonnizam;Wakil, Karzan;Khorami, Majid
    • Computers and Concrete
    • /
    • 제23권1호
    • /
    • pp.61-68
    • /
    • 2019
  • This paper presents a computational rational model to predict the ultimate and optimized load capacity of reinforced concrete (RC) beams strengthened by a combination of longitudinal and transverse fiber reinforced polymer (FRP) composite plates/sheets (flexure and shear strengthening system). Several experimental and analytical studies on the confinement effect and failure mechanisms of fiber reinforced polymer (FRP) wrapped columns have been conducted over recent years. Although typical axial members are large-scale square/rectangular reinforced concrete (RC) columns in practice, the majority of such studies have concentrated on the behavior of small-scale circular concrete specimens. A high performance concrete, known as polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with non-metallic bars (glass reinforced polymer) has been studied. The material is described at micro and macro level, presenting the key physical and mechanical properties using different experimental techniques. Furthermore, a full description of non-metallic bars is presented to evaluate its structural expectancies, embedded in the polymer concrete matrix. In this paper, the mechanism of mechanical interaction of smooth and lugged FRP rods with concrete is presented. A general modeling and application of various elements are demonstrated. The contact parameters are defined and the procedures of calculation and evaluation of contact parameters are introduced. The method of calibration of the calculated parameters is presented. Finally, the numerical results are obtained for different bond parameters which show a good agreement with experimental results reported in literature.

Standards Harmonization and Asymmetric Compliance Technology

  • Ryu, Han-Eol
    • Journal of Korea Trade
    • /
    • 제25권3호
    • /
    • pp.1-20
    • /
    • 2021
  • Purpose - The purpose of this paper is to examine the welfare effects of standards harmonization between technologically asymmetric countries, and to determine optimal harmonization strategies for a country with mid-level technological advancement. Design/methodology - Following Salop's circular city model (Salop, 1979), this study constructs a simple, horizontally-differentiated oligopoly model in which three firms and three countries exist. Each country adopts different compatibility standards and each firm incurs conversion costs for foreign market access due to differences in standards. The conversion costs are related to technology; standards harmonization removes these costs between participating countries. The paper considers three cases: i) no harmonization; ii) harmonization with the more technologically-advanced country and iii) harmonization with the less technologically-advanced country. Findings - The paper first considers a scenario in which all three firms occupy some share of the market in each country. It shows that standards harmonization with both the technologically moreor less-advanced country always increases consumer surplus and social welfare. In addition, the producer surplus will increase if the harmonization partner has a higher technology level, whereas it may decrease if the partner has a lower technology level. It also shows that if most domestic export goods are in sectors with conversion costs above a certain level, harmonizing standards with a technologically more-advanced country should be prioritized. Such strategies, moreover, should be emphasized when there exists a large technology gap among countries. Lastly, the paper considers another scenario, in which harmonization leads to the foreclosure of the non-member firm from the member countries' markets. It shows that harmonization improves the social welfare of a mid-level technology country regardless of its partner's technology. It also shows that the country should prioritize harmonization with the technologically less-advanced country. Originality/value - Though some of the existing studies consider the welfare effects of harmonization, their main assumption is that firms have the same conversion technology. Since complying with standards often requires substantial technological advancement and technical expertise, harmonization of compatibility standards between countries with gaps in technological ability carries different implications. This paper investigates the welfare effects of this harmonization and determines an optimal harmonization strategy while considering technological asymmetry among countries in standards compliance.

도시유역에서 재생자원기반 유기성 토량개량제 적용에 따른 비점오염물질 관리 효과 평가 (Evaluation of Nonpoint Pollutant Management Effect by Application of Organic Soil Ameliorant Based on Renewable Resources in Urban Watershed)

  • 박윤경;안창혁
    • 한국물환경학회지
    • /
    • 제40권3호
    • /
    • pp.131-139
    • /
    • 2024
  • This study investigated the chemical properties of Organic Soil Amendments (OSAs) made from organic waste. It also assessed the effectiveness of using these OSAs in the soil layer of Green Infrastructure (GI) to reduce stormwater runoff and non-point source pollutants. The goal was to improve the national environmental value through resource recycling and contribute to the circular economy transformation and carbon neutrality of urban GI. The OSAs used in this study consisted of spent coffee grounds and food waste compost. They were found to be nutrient-rich and stable as artificial soils, indicating their potential use in the soil layer of GI facilities. Applying OSAs to bio-retention cells and permeable pavement resulted in a reduction of approximately 11-17% in stormwater runoff and a decrease of about 16-18% in Total Phosphorus (TP) discharge in the target area. Increasing the proportion of food waste compost in the OSAs had a positive impact on reducing stormwater runoff and pollutant emissions. This study highlights the importance of utilizing recycled resources and can serve as a foundation for future research, such as establishing parameters for assessing the effectiveness of GI facilities through experiments. To enable more accurate analysis, it is recommended to conduct studies that consider both the chemical and biological aspects of substance transfer in OSAs.

입방체경화재료의 삼차원거동 및 강도특성 (Three-dimensional Behavior and Strength Characteristics of Cubical Hal-dening Materials.)

  • 강병선
    • 한국지반공학회지:지반
    • /
    • 제5권3호
    • /
    • pp.19-28
    • /
    • 1989
  • 본문은 전단과정에서 경화되는 모래와 같은 재료의 구성식을 연구하기 위하여 그 기초실험으로서 이미 경화된 콘크리트를 대상으로 3주응력을 독립적으로 제어할 수 있는 입방체삼축추축실험기를 통해 여러가지 응력경로 실험을 실시한 것이다. 실험으로서는 HC, CTC, TC, TE, SS 등 5종이고 그 들의 응력-변형률관계와 강도특성을 8면체면에서 고찰한 것이다. 이들을 통한 주요 결론은 다음과 같다. 1. 경화재료에 대한 전단강도의 크기는 CTC, TC, SS, TE의 순서이다. 2. 8면체전단강도는 응력경로에 의존하고 3. 또한 등방응력이 클수록 좋다. 4. 8면체면에서 극한포락선은 원추형상이다. 5. 마찰성재료인 경화재료에 대해서는 인장강도의 영향을 고려해야 한다.

  • PDF