• 한국지반환경공학회 논문집
• /
• 제17권4호
• /
• pp.33-37
• /
• 2016

기존 뒤채움재의 대체방안으로 고려되는 유동성 채움재(Controlled Low Strength Material, CLSM)의 경화 특성 및 강도발현은 시공기간을 결정하는 주요 요소이다. 본 연구에서는 시간영역반사법(Time Domain Reflectometry, TDR)을 이용하여 유전상수를 도출함으로써 CSLM의 경화 특성을 모니터링하고, 산정된 유전상수와 일축압축강도간의 관계를 분석해보고자 하였다. CLSM 시료는 시멘트, 비회, 실트, 모래, 급결제 및 물로 배합되었으며 배합된 시료의 플로우, 단위중량, 일축압축강도와 같은 재료 특성을 조사하였다. 양생 기간 동안 CLSM의 유전율 특성을 모니터링하기 위하여 TDR 프로브가 설치된 몰드 및 Reflectometer를 이용하여 측정시스템을 구성하였다. 실험결과 유전상수는 양생 초기에 일정한 값을 유지하다, 시간이 진행됨에 따라 점차 감소하는 것으로 나타났다. 또한, 일축압축강도와 유전상수를 회귀분석한 결과 두 물성 사이에는 반비례적인 거듭제곱함수의 관계가 있음을 보여주었다. 본 연구에서 제안한 시간영역반사법을 이용한 CLSM의 특성 모니터링은 일축압축강도를 추정할 수 있는 현장 비파괴시험기법으로 효과적으로 사용될 수 있을 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.151-163
• /
• 2020

Grouting method is an effective way of reinforcing cracked rock masses and plugging water gushing. Current grouting diffusion models are generally developed for horizontal cracks, which is contradictory to the fact that the crack generally occurs in rock masses with irregular spatial distribution characteristics in real underground environments. To solve this problem, this study selected a cement-sodium silicate slurry (C-S slurry) generally used in engineering as a fast-curing grouting material and regarded the C-S slurry as a Bingham fluid with time-varying viscosity for analysis. Based on the theory of fluid mechanics, and by simultaneously considering the deadweight of slurry and characteristics of non-uniform spatial distribution of viscosity of fast-curing grouts, a theoretical model of slurry diffusion in an oblique crack in rock masses at constant grouting rate was established. Moreover, the viscosity and pressure distribution equations in the slurry diffusion zone were deduced, thus quantifying the relationship between grouting pressure, grouting time, and slurry diffusion distance. On this basis, by using a 3-d finite element program in multi-field coupled software Comsol, the numerical simulation results were compared with theoretical calculation values, further verifying the effectiveness of the theoretical model. In addition, through the analysis of two engineering case studies, the theoretical calculations and measured slurry diffusion radius were compared, to evaluate the application effects of the model in engineering practice. Finally, by using the established theoretical model, the influence of cracking in rock masses on the diffusion characteristics of slurry was analysed. The results demonstrate that the inclination angle of the crack in rock masses and azimuth angle of slurry diffusion affect slurry diffusion characteristics. More attention should be paid to the actual grouting process. The results can provide references for determining grouting parameters of fast-curing grouts in engineering practice.

• 한국결정성장학회지
• /
• 제25권6호
• /
• pp.257-262
• /
• 2015

현재 전 세계적으로 지구온난화의 주범인 $CO_2$ 저감을 위한 노력을 하고 있으며, 산업발전에 필요한 화력발전 등에서 발생한 부산물을 재활용하는 방안이 시급하다. 따라서 본 연구는 산업부산물인 비산재와 폐기물 슬래그를 이용하여 모르타르 경화체를 제작하였으며 알칼리 활성화제 첨가에 따른 물성을 비교하기 위해 비교적 낮은 농도인 3 M의 NaOH solution을 사용하였고, 이 경화체에 초임계 이산화탄소 조건($40^{\circ}C$, $80kgf/cm^2$ pressure, 60 min)에서 탄산화를 통하여 $CO_2$를 경화 체내에 안정적으로 고정화 시켜 이에 따른 물성을 평가하였다. 탄산화 인자인 CaO의 함량이 많을수록 탄산화율은 높게 나타났으며, 탄산화 후 무게변화율이 최대 약 12 % 증가하였다. 탄산화 후 압축강도는 전과 비슷한 수준이었으며, 이를 통해 탄산화를 통해 $CO_2$를 안정하게 고정화시킨 친환경 소재에 적용 가능성을 확인할 수 있었다. 또한 탄산화 반응 후에 생성되는 $H_2O$로 인해 추가적인 양생을 통해 장기적인 관점에서 탄산화를 통해 물성향상 또한 기대해 볼 수 있을 것으로 생각된다.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.28-34
• /
• 2008

Objectives. The objectives of this study were: 1) to compare the effect of varying timing of light curing on shear bond strength, and; 2) to compare the shear bond strength of three self-adhesive cements. Materials and methods. A total of 72 extracted non-carious teeth were divided into 24 for Unicem tests, 24 for Maxcem tests, and 24 for Biscem tests; they were assigned 3 * 2 subgroups of 12 teeth each. The specimens were prepared as follows: 1) The calculus and periodontal ligament were removed from the teeth; 2) The teeth were stored in normal saline; 3) The occlusal enamel of each tooth was removed using high-speed coarse diamond burs under water cooling, and; 4) Finally, the teeth were flattened by 600-grit silicone carbide paper disks. Resin blocks were adhered using either Unicem, Maxcem, or Biscem. Light curing timing was divided into two groups: U10, M10, and B10 were exposed to light after 10 seconds, and; U150, M150, and B150 on the other side were exposed to light after 150 seconds. Shear bond strength was measured by a Universal testing machine with cross head speed of 1mm/min. T-test and One way ANOVA were used for the statistical analysis of data. Results. The shear bond strength of U150 was not significantly higher than that of U10 (U150: 20.55.7Mpa, U10: 18.73.80Mpa). On the other hand, the shear bond strength of M150 was significantly higher than that of M10. The shear bond strength of B150 was also significantly higher than that of B10 (M150:14.45.7Mpa, M10: 9.94.2Mpa, B150: 24.38.3Mpa, B10: 17.27.3Mpa). When the light curing timing was 10sec after bonding, the shear bond strength of Unicem was highest; the shear bond strength of Biscem was highest when the light curing timing was 150sec after bonding (U10: 18.73.80Mpa, B150: 24.38.3Mpa). Significance. Since Unicem is less sensitive based on light curing timing, dentists seem to use it without considering the light curing timing. Maxcem showed the lowest bonding strength (especially M10). Thus, when using Maxcem, dentists need to delay the light curing after adhesion.

• 에너지공학
• /
• 제8권2호
• /
• pp.224-232
• /
• 1999

캡슐형 잠열재를 이용한 열저장 시스템은 바닥 난방 및 건물 난방에서 매우 효과적인 시스템이다. 이러한 시스템 개발에 필수적인 요소가 열유동 매체가 순환하는 파이프 주변의 캡슐내 온도 분포와 열유동 매체의 유량 등이다. 그러므로 본 연구에서는 3차원 비정상 상태에서 Navier-Stokes 방정식, 난류모델을 비롯한 스칼라 보존 방정식을 적용하여 캡슐 블록의 온도 분포 및 파이프 내의 유동장 해석을 수행하였다. 또한 본 연구와 같이 계산 영역이 특별한 기하학적 현상을 형상(circle+square)인 문제 해결하는데 적용할 수 있는 새로운 격자 생성 기술(MBFGE/CCM)을 개발하였다. 격자계는 파이프에서 원형 격자를 이용하였고, 캡슐 블록에서 사각 격자를 이용하여 다중격자와 미세격자를 결합하여 사용하였다. 본 연구의 목적은 컴퓨터를 이용한 수치해석적 방법을 미세 캡슐을 이용한 축열보드에 적용하여 2종류의 열경계 상태에 대하여 속도와 온도분포를 계산하여 비교분석을 하는 것이다. 온도는 축열 보드의 한 쪽면은 대류면이고 다른 한쪽면은 단열면인 경우(Case 2)보다 양면 모두 단열인 경우(Case 1)일 때 더 높게 상승하였다. 온수 파이프 중심선인 Y=0 에 가까운 영역에서 Case 1과 Case 2사이에 축열 보드 내에서 온도 차이는 확연하게 나타났다. 향후 수치해석의 정확도를 높이고 축열 보드의 열전달 현상을 보다 정확히 계산하기 위해서는 위치 및 시간에 따른 정밀한 온도 측정값이 필요하고 특히 잠열재인 미세 캡슐이 상변화를 하므로 온도 변화에 따른 물질의 비열(C$_{p}$)과 열전달율(λ)을 고려한 방정식이 요구된다.

• 콘크리트학회논문집
• /
• 제18권5호
• /
• pp.631-637
• /
• 2006

본 연구에서는 배합강도 24MPa로 설계된 25-24-18 규격의 콘크리트 배합에 불소-실리카 복합형 균열저감제(FS)를 시멘트 중량을 기준으로 0.5% 간격으로 2.0%까지 혼입하고, 유동성상 및 경화성상 등의 기초물성을 평가하였다. 기초물성 결과로부터 콘크리트의 수축균열 및 투기성 평가를 위한 FS의 적정 첨가율로서 0.5%를 도출하였으며, 무첨가 콘크리트와 수축균열 및 투기성 평가를 위한 모의부재 시험을 실시하였다, 수축균열에서 FS를 0.5% 첨가한 콘크리트의 균열개수는 50%, 균열길이 및 균열면적은 각각 69.7%, 74.4% 감소되었다. 콘크리트의 투기성을 측정한 결과, FS를 첨가한 콘크리트가 투수계수는 67%, 침투깊이는 약 40% 감소하였다. 따라서 FS 첨가에 의해 콘크리트의 기초물성 저해 없이 콘크리트의 수축균열의 저감과 투기성이 향상되는 효과를 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.561-573
• /
• 2006

Statement of the problem: In cases of low bone level in maxilla followed by extraction due to severe periodontitis or enlarged maxillary sinus, crown-root ratio of implant prosthesis will increase. The prognosis of these cases is not good as expected. Purpose : The purpose is to compare stress distribution due to crown-root ratio and effect of splinting between two implants in maxillary molar area under different loads Material and methods: Using ITI($4.1{\times}10$ mm) implant. two finite element models were made(model S: two parallel implants, model A: one of two is 20 degree inclined). Each model was designed in different crown-root ratio(0.7:1, 1:1, 1.25:1) and set cement type gold crown to make it splinted or non-splinted clinical situations. After that, 300 N force was loaded to each model in four ways.(load 1 : middle of occlusal table, load 2 : middle of buccal cusp, load 3 : middle of lingual cusp, load 4 : horizontal load to middle of buccal cusp), and stress distribution was analyzed. Results: On all occasions, stress was concentrated on neck of implant near cortical bone. In the case of inclined implant, stress was increased compared with parallel implants. Under load 1, 2, 3, stress was not increased even when crown-root ratio increases, but under load 4, when crown-root ratio increases, stress also increased. And more stress was concentrated under load 1 than load 2, 3. When crown-root ratio was same, stress under load 1, 2, 3 decreased when splinting, but under load 4, stress did not really decrease. Conclusion: Under vertical load, stress distribution related to crown-root ratio did not change. But under horizontal load, stress increased as crown-root ratio increases. Under vertical load, splinting decreased stress but under horizontal load, effect of splinting was decreased as condition of implant changes for the worse such as increase of crown-root ratio, inclined implant.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.526-536
• /
• 2006

Statement of problem : Use of fiber composite technology as well as development of nonmetal implant prosthesis solved many problems due to metal alloy substructure such as corrosion. toxicity, difficult casting, expensiveness and esthetic limit. After clinical and laboratory test, we could find out that fiber-reinforced composite prostheses have good mechanical properties and FRC can make metal-free implant prostheses successful. Purpose : The purpose of this study is to evaluate the flexural strength of implant fixed prosthesis using fiber reinforced composite. Material and methods : 2-implant fixture were placed in second premolar and second molar area in edentulous mandibular model, and their abutments were placed, and bridge prostheses using gold, PFG, Tescera, and Targis Vectris were fabricated. Tescera was made in 5 different designs with different supplements. Group I was composed by 3 bars with diameter 1.0mm and 5 meshes, 2 bars and 5 meshes for Group II, 1 bar and 5 meshes for Group III, and only 5 meshes were used for Group IV. And Group V is composed by only 3 bars. Resin (Tescera) facing was made to buccal part of pontic of gold bridge. All of gold and PFG bridges were made on one model, 5 Targis Vectris bridges were also made on one model, and 25 Tescera bridges were. made on 3 models. Each bridge was attached to the test model by temporary cement and shallow depression was formed near central fossa of the bridge pontic to let 5 mm metal ball not move. Flexual strength was marked in graph by INSTRON. Results : The results of the study are as follows. The initial crack strength was the highest on PFG. and in order of gold bridge Tescera I, Tescera II, Targis vectris, Tescera IV, Tescera III, and Tescera V. The maximum strength was the highest on gold bridge, and in order of PFG, Tescera I, Tescera IV Tescera II, Targis vectris, Tescera III, and Tescera V. Conculsions : The following conclusions were drawn from the results of this study. 1. Flextural strength of implant prosthesis using fiber reinforced composite was higher than average posterior occlusal force. 2. In initial crack strength, Tescera I was stronger than Tescera V, and weaker than PFG. 3. Kinds and number of auxillary components had an effect on maximum strength, and maximum strength was increased as number of auxillary components increased. 4 Maximum strength of Tescera I was higher than Targis vectris, and lower than PFG.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.83-91
• /
• 2015

포러스 콘크리트는 시멘트, 물 그리고 굵은골재로 구성되어 있으며, 공기 및 물의 투과 그리고 흡음 등 지구 환경부하를 저감시키기 위해 사용되어 왔다. 그러나 포러스 콘크리트의 물리적, 역학적 성상은 시공시 이루어지는 다짐하중에 의해 변한다. 따라서 본 연구에서는 결합재 종류, 물-결합재비, 목표공극율에 따른 포러스 콘크리트의 물리적, 역학적 성상을 파악하였으며 특히, 다짐하중에 따른 포러스 콘크리트의 공극율, 강도, 투수계수의 물성변화를 파악하였다. 본 연구에서 사용한 골재는 부순자갈 생산과정에서 발생되는 부산물로서 최대크기는 13mm이다. 연구결과, 포러스 콘크리트의 목표 공극율, 투수계수, 압축강도는 공극율과 밀접한 상관성을 지니고 있으며, 공극율은 포러스 콘크리트의 배합설계로 제시할 수 있는 가능성이 있는 것으로 판단되다. 포러스 콘크리트의 압축강도는 팽창재 치환율 5%에서 가장 높게 나타났으며, 실리카 흄 치환율 10%에서 치환하지 않은 콘크리트보다 32% 높게 나타났다. 그리고 다짐하중을 변화시킨 본 연구결과 압축강도는 하중 15kN부터 증가하였고, 공극율은 하중 0.8kN부터, 투수계수는 하중 35kN부터 각각 감소하는 것으로 나타났다.