• 멤브레인
• /
• 제25권6호
• /
• pp.547-557
• /
• 2015

본 연구에서는 높은 이산화탄소 분리성능을 가지는 폴리이미드의 제조를 위해 2,2-bis(3,4-carboxylphenyl) hexafluoropropane과 두종류의 아민인 2,3,5,6-tetramethyl-1,4-phenylenediamine, Poly(ethylene glycol) bis(3-aminopropyl) terminated을 이용하여 합성을 진행하였다. 합성된 고분자를 비용매 상전이법으로 비대칭 분리막을 제조하기 위하여 고분자의 용해도 지수 추정 값과 비용매 상전이 계수 측정을 통해 용매를 선정하였고, 고분자 용액 점도 측정을 통해 분리막 제조를 위한 도프용액 중의 고분자의 함량을 결정하여 질산리튬을 첨가제로 사용하여 최종적으로 분리막을 제조하였다. 제조된 평판형 비대칭 분리막은 전자주사현미경(SEM)을 통해 질산리튬과 휘발성 용매 함량에 변화에 따른 모폴로지의 변화를 확인하였으며, 이의 변화에 따른 기체 투과도 변화를 확인하였다. 분리막 제조를 위한 도프용액 중의 휘발성 용매 함량이 작을수록 선택도 변화가 없으면서 이산화탄소 투과도가 증가하는 것을 확인하였다.

• 한국재료학회지
• /
• 제30권7호
• /
• pp.350-358
• /
• 2020

A variety of composite powders having different aluminum and carbon contents are prepared using various organic solvents having different amounts of carbon atoms in unit volume as ball milling agents for titanium and aluminum ball milling. The effects of substrate temperature and post-heat treatment on the texture and hardness of the coating are investigated by spraying with this reduced pressure plasma spray. The aluminum part of the composite powder evaporates during spraying, so that the film aluminum content is 30.9 mass%~37.4 mass% and the carbon content is 0.64 mass%~1.69 mass%. The main constituent phase of the coating formed on the water-cooled substrate is a non-planar α₂ phase, obtained by supersaturated carbon regardless of the alloy composition. When these films are heat-treated at 1123 K, the main constituent phase becomes γ phase, and fine Ti₂AlC precipitates to increase the film hardness. However, when heat treatment is performed at a higher temperature, the hardness is lowered. The main constitutional phase of the coating formed on the preheated substrate is an equilibrium gamma phase, and fine Ti₂AlC precipitates. The hardness of this coating is much higher than the hardness of the coating in the sprayed state formed on the water-cooled substrate. When hot pressing is applied to the coating, the porosity decreases but hardness also decreases because Ti₂AlC grows. The amount of Ti₂AlC in the hot-pressed film is 4.9 vol% to 15.3 vol%, depending on the carbon content of the film.

• Conservation and Restoration of Cultural Heritage
• /
• 제1권1호
• /
• pp.9-22
• /
• 2012

The most widely excavated iron artifacts used as weapons or farm tools from central southern regions of Korea were subjects of non-metallic inclusion analysis through metallographic examination, microhardness measurement, and scanning electron microscopy with energy dispersive X-ray spectroscopy. Through metallographic interpretation and study of the analyzed results, the steel manufacturing and iron smelting using heat processing in the iron artifacts excavated from the central southern region of the ancient Korean peninsula was studied, and the analysis of the non-metallic inclusions mixed within the metallic structures was interpreted as the ternary phase diagram of the oxide to infer the type of iron ores for the iron products and the temperature of the furnace used to smelt them. Most of the ancient forged iron artifacts showed $Al_2O_3/SiO_2$ with high $SiO_2$ contents and relatively low $Al_2O_3$ contents for iron ore, indicating t hat for $Al_2O_3$ below 5%, it is presumed that magnetic iron ores were reduced to bloom iron (sponge iron) with direct-reduction process for production. The temperature for extraction of wustite for $Al_2O_3$ below 1% was found to be $1,020{\sim}1,050^{\circ}C$. Considering the oxide ternary constitutional diagram of glassy inclusions, the steel-manufacturing temperature was presumed to have been near $1,150{\sim}1,280^{\circ}C$ in most cases, and minimum melting temperature of casting iron part excavated in Daeseong-ri. Gyeonggi was near $1,400^{\circ}C$, and it is thought that hypoeutectic cast iron of about 2.3% carbon was casted and fragility of cast iron was improved by decarburizing in solid state.

• 전기화학회지
• /
• 제17권2호
• /
• pp.130-137
• /
• 2014

본 연구에서는 스크린 프린팅 방법을 이용하여 이산화납($PbO_2$)/탄소 반죽 전극을 제작하고, 이를 전기화학 방법의 과일 천연당(포도당, 자당, 과당) 측정용 센서로 이용하였다. 이산화납/탄소 반죽전극은 탄수화물과 같은 유기화합물의 전기화학적 산화촉매 신호를 측정함으로써 효소를 사용하지 않고도 당의 측정이 가능하다. 또한 측정 시 심각한 방해작용을 하는 아스코르브산(ascorbic acid)은 Nafion 막을 전극표면에 도입함으로써 효과적으로 감소시켰다. 최적화된 Nafion/이산화납/탄소 반죽 전극은 사람이 느끼는 상대당도(과당>자당>포도당)와 유사하게 각 당에 대한 감응신호를 나타내었다.

• 자원환경지질
• /
• 제54권4호
• /
• pp.409-425
• /
• 2021

이산화탄소가 지구온난화를 초래하는 대표적인 온실가스로 지목되면서 대기 중의 이산화탄소 농도를 줄이기 위하여 많은 노력들이 진행되어 왔다. 그러한 노력들 중 특히 CO₂ 포집 및 지중 저장기술(carbon dioxide capture and storage, CCS)이 감축 목표량을 달성하기 위해서 필수적으로 고려되고 있다. 그러나 이러한 지중 저장기술이 상용화되기 위해서는 안전성이 보장되어야 한다. 특히 이산화탄소 누출이 농경지에서 발생할 경우에는 작물 생장과 관련되어 많은 문제를 야기할 수 있다. 이에 본 연구에서는 지중 저장지로부터 누출된 이산화탄소가 토양 비옥도에 미치는 영향에 대하여 고찰하였다. 이를 위하여 인위적인 이산화탄소 누출 시험을 수행하였으며, pH, 양이온치환용량, 교환성 양이온, 전기전도도, 토양 유기물 함량, 총 질소, 질산태 질소, 암모니아태 질소, 총 인, 유효태 인산, 총 황, 유효태 황, 유효태 붕소 등과 같은 토양의 화학적 특성들을 비옥도 지시 인자로 선정하였다. 누출 시험은 비경작지 토양 한 종류와 경작지 토양 두 종류(옥수수와 콩 재배)를 대상으로 이루어졌다. 비경작지 토양은 거친 모래가 많은 사질토양으로 공극률은 42.6%로 조사되었으며, 경작지 토양인 옥수수 재배 토양은 양질 사토(loamy sand)로 공극률이 46.8%이었다. 콩과식물(soybean) 재배 토양은 옥수수 재배 토양과 동일한 양질 사토로서 공극률이 48%로 조사되었다. 누출시험을 위해 6개의 인공누출 칼럼 장치를 이용하여 이산화탄소를 주입하였다. 이산화탄소 주입은 비경작지와 경작지 토양의 경우 각각 60일과 70일 동안 진행하였다. 이산화탄소 누출 후 비경작지 및 경작지 토양에 대하여 각각 12, 14일 간격으로 1 공극 부피의 인공강우 모사 시험을 수행한 후 용출액과 토양 시료를 채취하여 비옥도 지시 인자를 분석하였으며, 이산화탄소 누출 전후 변화 양상을 비교 평가하였다. 토양 내 잔류 교환성 양이온, 전기전도도, 토양 유기물 함량, 총질소, 총인 등은 이산화탄소의 영향을 크게 받지 않은 것으로 나타났다. 그러나 질산태 질소, 암모니아태 질소, 유효 인산, 유효 황, 유효 붕소 등은 감소하는 경향을 보였으며 이에 의해 토양 비옥도를 저하시킬 수 있을 것으로 판단된다. 본 연구에서는 토양의 완충능력 때문에 pH의 변화가 없었지만, 이산화탄소가 장기간 누출된다면 pH의 감소에 의한 토양 산성화가 초래될 가능성이 있을 것으로 예측된다.

• Geomechanics and Engineering
• /
• 제33권3호
• /
• pp.261-269
• /
• 2023

In this study, the compressive strength of cement stabilized soil was predicted using the electrical resistivity measurement. The effects of the water to cement (w/c) ratio and recovered Carbon Black (rCB) contents were examined. A series of electrical resistivity and compressive strength tests were conducted on two types of stabilized soil after 28 days of curing. Multiple nonlinear regression (MNLR) analysis was used to evaluate the relationship between the compressive strength and the electrical resistivity in terms of the rCB, C_u (uniformity coefficient), and w/c ratio. The results showed that the w/c ratio and C_u have a strong influence on the compressive strength and electrical resistivity of the cement stabilized soil compared to the rCB content. The use of a small amount of rCB led to a decrease in the void space in the specimen and was attributed to the increase strength and decrease electrical resistivity. A high w/c ratio also induced a low electrical resistivity and compressive strength, whereas 3% rCB in the cemented soil provided the optimum strength for all w/c ratios. Finally, a prediction equation for the compressive strength using the electrical resistivity measurement was suggested based on its reliability, time effectiveness, non-destructiveness, and cost-effectiveness.

• 공업화학
• /
• 제10권5호
• /
• pp.690-695
• /
• 1999

석탄핏치로부터 제조된 메조페이스 핏치의 실험적 연구가 용융상태에서의 유변학적 거동을 알아보고자 수행되었다. 겉보기 점도, 전단변형율, 전단응력, 퀴놀린 불용분(QI), 연화점(SP) 변화 등을 조사하여 다음과 같은 결론을 얻었다. 중합시에 메조페이스의 적당한 함량을 증가시키기 위한 조건으로는 열처리 시간이 5시간, 촉매농도는 3%, 반응온도는 $420^{\circ}C$로 나타났다. 온도상승에 따른 겉보기 점도 변화는 핏치의 열처리 조건에 따라 달라지는데 열처리 온도가 높을수록, 열처리 시간이 길어질수록, 메조페이스 함량이 증가할수록 커지며, 유동도는 작아진다. $270^{\circ}C$ 이후의 용융 메조페이스 핏치의 유변학적 거동은 $375^{\circ}C$ 이하에서는 Newtonian fluid의 성질을 띠며 그 이상에서는 Non Newtonian fluid의 거동을 보이며 Casson 모델에 잘 일치됨을 알 수 있었다.

• 농업과학연구
• /
• 제50권4호
• /
• pp.713-721
• /
• 2023

Soil acidification challenges global food security by adversely influences soil fertility and agricultural productivity. Carbonized agricultural residues present a sustainable and ecofriendly way to recycle agricultural waste and mitigate soil acidification. We evaluated the effects of organic amendments on lettuce growth and soil chemical properties in two soils with different pH levels. Carbonized rice husk was produced at 600℃ for 30 min and rice husk was treated at 1% (w·w^-1). Carbonized rice husk increased soil pH, electrical conductivity, total carbon content, and nitrogen content compared with untreated and rice husk treatments. Furthermore, this study found that lettuce growth positively correlated with soil pH, with increasing soil pH up to pH 6.34 resulting in improved lettuce growth parameters. Statistical correlation analysis also supported the relationship between soil pH and lettuce growth parameters. The study findings showed that the use of carbonized rice husk increased the constituent elements of lettuce, such as carbon, nitrogen, and phosphate content. The potassium content of lettuce followed a similar trend; however, was higher in acidic soil than that in non-acidic soil. Therefore, improving the pH of acidic soil is essential to enhance agricultural productivity. It is considered advantageous to use agricultural residues following pyrolysis to improve soil pH and agricultural productivity.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.173-178
• /
• 2002

Fourier transform has been one of the most common tools to study the frequency characteristics of signals. With the Fourier transform alone, it is difficult to tell whether signal's frequency contents evolve in time or not. Except for a few special cases, the frequency contents of most signals encountered in the real world change with time. Time-frequency methods are developed recently to overcome the drawbacks of Fourier transform, which can represent the information of signals in time and frequency at the same time. In this study, heat damage process of a carbon fiber reinforced plastic(CFRP) and glass fiber reinforced plastic(GFRP) under monotonic tensile loading was characterized by acoustic emission. Different kinds of specimens were used to determine the characteristics of Strength and AE signals. Time-frequency analysis methods were employed for the analysis of fracture mechanism in CFRP such as matrix cracking, debonding and fiber fracture.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.33-38
• /
• 1988

Natural mineral water is generally quite different from ordinary drinking water due to its original nature and various properties. The complexity of natural mineral water requires, therefore, not only to identify its nature and proper characteristics, but also to classify them by a reasonable scientific basis of comparison. The study was concentrated on a possible classification technique to natural mineral waters by their constitutions and physico-ehemical properties. The classification was carried out by the computation of such numerical parameters as ionic equivalent percentage, electrolytic conductance or mobility, ionic molecular weight, molecular concentration, equivalent conductivity and degree of ionization in consideration of the determinative criteria as follows -particular single element or molecule -major components of natural waters as bicarbonate, sulphate, chloride,caloride, calcium, magnesium, and sodium -moleculat concentration related to blood osmotic pressure -water temperature at emergence from spring -contents of free carbon dioxide (CO2) -pH value of water -total dissolved solids or salts (NaCl) The results obtained proved out to be clearly distinguhhable from ordinary drinking water as far as concern natural mineral water as an example on the subject -simple water -bicarbonate-predominating water -cold spring -carbonated-non gaseous water -weak alkaline water -non saline water Putting these various results together, the sample turned out to be a kind of natural mineral water that can be used as a drinking water if microbiologically safe.