• 한국측량학회지
• /
• 제28권5호
• /
• pp.493-504
• /
• 2010

This study proposes a classification method based on an automated training extraction procedure that may be used with very high resolution (VHR) images of non-accessible areas. The proposed method overcomes the problem of scale difference between VHR images and geographic information system (GIS) data through filtering and use of a Landsat image. In order to automate maximum likelihood classification (MLC), GIS data were used as an input to the MLC of a Landsat image, and a binary edge and a normalized difference vegetation index (NDVI) were used to increase the purity of the training samples. We identified the thresholds of an NDVI and binary edge appropriate to obtain pure samples of each class. The proposed method was then applied to QuickBird and SPOT-5 images. In order to validate the method, visual interpretation and quantitative assessment of the results were compared with products of a manual method. The results showed that the proposed method could classify VHR images and efficiently update GIS data.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.393-398
• /
• 2004

It is transformed map data of different coordinate system into unique system and We triedto make topographic map on non-accessible area. We transformed Russian map coordinates(Krassovsky, G-K projection) intoWGS-84, TM projection and assessed accuracy. The RMSE(in East and West bearings : ${\pm}$13.67m, in North and South bearings ： ${\pm}$14.67m) using only SCP(Survey Control Point) is more accurate than that(in East and West bearings ： ${\pm}$24.26m, in North and South bearings : ${\pm}$25.32m) using SCP, intersection of road, bridge. Exterior orientation parameters are estimated using rigorous modelling and GCPs are classified with SCP, intersection of road, bridge. Rigorous modelling is performed with each classified GCP. The modelling result usingonly SCP(in East and West bearings : ${\pm}$13.53m, in North and South bearings ： ${\pm}$14.22m) is more accurate than that using intersection of road(in East and West bearings ： ${\pm}$16.l1m, in North and South bearings： ${\pm}$23.85m), bridge(in East and West bearings : ${\pm}$17.21m, in North and South bearings : ${\pm}$21.82m). The results means that SCP is more accurate than intersection of road, bridge because of edit to generate map. therefore, SCP is suitable for object of GCP in paper map(1:50,000). Geographic information on non-accessible area and analysis is performed. The results of stereoscopic plotting is well matched old map data on road, railroad but, many objects are generally editted. It is possible to update on new objects(building, tributary ‥‥etc). Ability of description using SPOT-5(stereo) is more than features and items included in 1:50,000 topographic map. Therefore, it is possible to make large scale map than 1:50,000 topographic map using SPOT-5 imagery. But, there are many problems(accurate GCPs, obtain of high resolution stereoscopic satellite imagery in a period ‥‥ etc) to make topographic map on non-accessible area. It is actually difficult to solve these problems. therefore, it is possible to update 1:50,000 topographic map in part of topographic map generation.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.317-324
• /
• 2010

In recent years, many automatic classification approaches have been employed. An automatic classification method can be effective, time-saving and can produce objective results due to the exclusion of operator intervention. This paper proposes a classification method based on automated training for high resolution multispectral images using ancillary data. Generally, it is problematic to automatically classify high resolution images using ancillary data, because of the scale difference between the high resolution image and the ancillary data. In order to overcome this problem, the proposed method utilizes the classification results of a Landsat image as a medium for automatic classification. For the classification of a Landsat image, a maximum likelihood classification is applied to the image, and the attributes of ancillary data are entered as the training data. In the case of a high resolution image, a K-means clustering algorithm, an unsupervised classification, was conducted and the result was compared to the classification results of the Landsat image. Subsequently, the training data of the high resolution image was automatically extracted using regular rules based on a RELATIONAL matrix that shows the relation between the two results. Finally, a high resolution image was classified and updated using the extracted training data. The proposed method was applied to QuickBird and SPOT-5 images of non-accessible areas. The result showed good performance in accuracy assessments. Therefore, we expect that the method can be effectively used to automatically construct thematic maps for non-accessible areas and update areas that do not have any attributes in geographic information system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1693-1706
• /
• 2008

It is of importance to determine the zero effective stress void ratio($e_{00}$), which is the void ratio at effective stress equal to zero, and the relationships of void ratio-effective stress and of void ratio-hydraulic conductivity for characterizing non-liner finite strain consolidation behavior for ultra-soft dredged materials. The zero effective stress void ratio means a transitional status from sedimentation to self-weight consolidation of very soft soil deposits, and acts as a starting point for self-weight consolidation in the non-linear finite strain numerical analysis such as PSDDF. In this paper, a new method for determining the zero effective stress void ratio has been introduced with the aid of measuring electrical resistivity of the specimen. A correlation between the zero effective stress void ratio and the initial slurry void ratio has been proposed, which can be used in PSDDF analysis as an input parameter. Combining all of the accessible experimental data, the consolidation characteristics of a dredged soil from the Incheon area has been studied in detail.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2001년도 춘계 학술대회 논문집 통권 4호 Proceedings of the 2001 KSRS Spring Meeting
• /
• pp.140-148
• /
• 2001

일반적으로 위성영상의 센서에 대한 모델은 촬영대상지역의 지상기준점을 이용하여 결정하며, 이와 같은 지상기준점은 기존 지형도를 이용하거나 또는 지상측량에 의하여 획득한다. 그러나 지구관측위성에서 얻어진 영상의 촬영지역이 비접근 지역인 경우에는 지상측량에 의하여 지상기준점을 획득하기 어려우며, 또한 대상지역의 지형도가 제작되어 있지 않은 경우에는 실질적으로 위성영상을 이용하여 지형정보를 추출하기 어려운 실정이다. 본 논문은 지상기준점의 취득이 어려운 비접근 지역에 대한 위성영상에서 지형정보를 획득하기 위한 방법을 제시하였다. 먼저, 공선조건식을 기반으로 10개의 위성센서모델을 개발하고, 개발된센서모델의 거동을 분석하기 위하여 Space Resection 및 Space Inetersection을 통해 각각의 센서모델에 대한 적합성을 실험하였다. 이를 바탕으로 비접근 지역에 대한 지형정보를 취득하기 위하여 영상을 재구성하거나 Pseudo 영상을 제작하고, 이에 대한 센서모델의 거동 및 정확도를 분석.제시하였다. 공선조건식을 이용한 Pushbroom 위성영상의 센서모델은 투영 중심의 위치와 회전요소에 대한 6개의 외부표정요소와 상관도가 높은 회전요소($\omega$, $\phi$)를 고정된 값으로 사용하는 센서모델을 개발하였다. 비접근 지역의 영상으로부터 Pseudo 영상을 임의로 제작하여 패스내에서 중복영역을 갖도록 구성하였다. 본 연구에서 이용한 인공위성 데이터는 서로 다른 패스에서 동일한 지역을 촬영한 SPOT 영상이며, 각각의 패스에서 두 장의 연속된 영상을 이용하였다. 개발된 10개의 센서모델과 5가지의 영상 재구성 방법에 따라 비접근 지역에서의 정확도는 다르게 나타났으며, 그 중 투영중심의 위치 및 회전요소 k를 1차 함수로 표현하고 회전요소 $\omega$, $\phi$를 고정시킨 센서모델과 Pseudo 영상을 이용한 방법이 비접근 지역 60km 지점의 검사점에서 최대오차 60m의 결과를 보였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.341-344
• /
• 2007

National Geospatial-Intelligence Agency(NGA) developed VPF in mid 1980 to digitalize military geospatial information. However, because VPF is very complicated system and was severly inefficient in producing, maintaining, and managing the data, VPF was required to be replaced by more efficient data format. These requests resulted in an integrated schema, and eventually VPF. The main idea of using FDB in the production of digital map of non-accessible area is to increase the accuracy. This research focuses on the production of high accuracy digital map by utilizing the FDB. The accuracy of digital map by FDB and by DGN was individually compared with 1m CIB imagery of the Korean peninsula. By analyzing 38 check points based on CIB, DGN showed RMSE of 52m X axis and 49m Y axis. FDB showed 15m in X axis and 13m in Y axis. These results show that the digital map produced using FDB has much higher accuracy than DGN based digital map.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.70-75
• /
• 2015

Fasciclin 1 (FAS1) is an extracellular protein whose aggregation in cornea leads to visual impairment. While a number of FAS1 mutants have been studied that exhibit enhanced/decreased aggregation propensity, no structural information has been provided so far that is associated with distinct aggregation potential. In this study, we have investigated the structural and thermodynamic characteristics of the wild-type FAS1 and its two mutants, R555Q and R555W, by using molecular dynamics simulations and three-dimensional reference interaction site model (3D-RISM) theory. We find that the hydrophobic solvent accessible surface area increases due to hydrophobic core repacking in the C-terminus caused by the mutation. We also find that the solvation free energy of the mutants increases due to the enhanced non-native H-bonding. These structural and thermodynamic changes upon mutation contribute to understand the aggregation of these mutants.

• 방송공학회논문지
• /
• 제19권3호
• /
• pp.372-384
• /
• 2014

DTV 필드 테스트는 실내와 실외에서 전계강도와 수신 가능성 등을 측정하는 것으로 실외의 경우 측정 차량을 도로에서 수평적으로 이동하면서 9m 높이의 안테나를 사용 DTV 신호를 측정하였다. 현대의 고층 빌딩과 같은 수직 집단 구조의 주거 형태에서는 수직적인 DTV 신호 측정을 통하여 수직 방향 전파 환경 분석이 필요하다. 특히 전면에 장애물이 많아 다중 경로 간섭과 임펄스 잡음의 영향으로 전계강도가 수신 임계값인 $43dB{\mu}V/m$ 이상인 경우에도 수신이 불가한 경우가 있어 건물 밀집지역이나 특수한 측정 환경에 적합한 필드 측정 및 분석이 절대적으로 필요하다. 이를 위하여 자유롭게 비행하면서 DTV 수신신호 레벨을 측정할 수 있는 비행체 옥토형 멀티콥터를 개발하고 시험을 거쳐 실용성 있게 성능을 개선하였다. 휴대형 소형 DTV 수신신호 레벨 측정기와 안테나 및 데이터 전송용 M/W 송신기 또는 녹화용 장비가 탑재되어 DTV 수신신호 레벨 측정이 가능한 이 멀티콥터를 이용하여 전파환경이 다른 3지역의 측정을 통해 신뢰성 검증과 실용성을 입증하였다. 수직 방향 수신신호 레벨 측정은 수직 방향 전파 환경 변화가 큰 장소, 고층 아파트 같은 집단적 수직 주거 형태, 도보나 차량으로 접근이 불가능한 지역 등 측정점의 특수한 환경에 적합한 데이터를 얻을 수 있어 기존의 수평적 필드 테스트에서는 접근하기 어려운 장소의 전파 변화 분석에 유용하게 사용할 수 있다.

• 한국주거학회논문집
• /
• 제11권3호
• /
• pp.99-107
• /
• 2000

The purpose of this study was to identify the universal design characteristics in residential environments. The subjects were 135 physically disabled persons who lived in the rental multi-family housing apartments in Pusan. Interview method was used for this study. They were an average age of 51 years and 63% were male. They were low income families and lived in 12 pyung ($39.75\textrm{m}^2$) apartments. They were asked about what housing characteristics were constraints in their daily living. They pointed out that the constraints in their apartments were as follows: 1) the small amount of space in the bathroom, kitchen, bedroom, and the entrance area of housing unit, 2) the unflat floor level between the bathroom and the hallway, or the balcony and the bedroom, 3) the slippery floor finish in the bathroom, 4) lack of grab bars or handrails in the bathroom and the ramp, 5) the kitchen work centers and the electric switches at improper height, and 6) the steep ramp. Therefore, the universal design characteristics in residential environments were the adequate amount of space, flat floor level, non-slippery floor finish, grab bars or handrails, accessible height, and ramp.

• 지질공학
• /
• 제30권3호
• /
• pp.303-314
• /
• 2020

먹는샘물 제조업체의 경우 주기적인 환경영향조사, 일취수량 제한, 그리고 취수량 및 수위, 수질(pH, EC, 온도)을 1시간 간격으로 계측하여 매월 보고하고, 정기 수질검사 등을 통해 엄격히 관리하고 있어 과잉 취수로 인한 지하수위 강하와 같은 문제가 발생하는 사례가 적으나 제조업체 주변 지하수관련 민원의 원인 제공자로 각인되고 있는 실정이다. 그러므로 환경영향조사의 물수지 분석 시 수문분야 전문가들의 평가에 부합하고, 비전문가에게도 쉽게 접근할 수 있는 기법의 제시가 필요하다고 판단된다. 따라서 샘물 취수정이 위치한 소유역의 지표수 수위 및 유출량을 측정하고 상시하천의 월별 기저유출량을 분리하였다. 또한 동일 유역의 지하수(취수정), 지표수, 강수의 산소, 수소 동위원소를 분석하여 지하수와 지표수의 함양특성에 관하여 추정하였다.