• Journal of Mechanical Science and Technology
• /
• 제14권11호
• /
• pp.1206-1215
• /
• 2000

This paper introduces the application of evolutionary fuzzy modeling (EFM) in constructing global function approximations to subsequent use in non-gradient based optimizations strategies. The fuzzy logic is employed for express the relationship between input training pattern in form of linguistic fuzzy rules. EFM is used to determine the optimal values of membership function parameters by adapting fuzzy rules available. In the study, genetic algorithms (GA's) treat a set of membership function parameters as design variables and evolve them until the mean square error between defuzzified outputs and actual target values are minimized. We also discuss the enhanced accuracy of function approximations, comparing with traditional response surface methods by using polynomial interpolation and back propagation neural networks in its ability to handle the typical benchmark problems.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.38-42
• /
• 2002

A fast iterative solving method of fuzzy relational equation is proposed. It is derived by eliminating a redundant comparison process in the conventional iterative solving method (Pedrycz, 1983). The proposed method is applied to image reconstruction, and confirmed that the computation time is decreased to 1 / 40 with the compression rate of 0.0625. Furthermore, in order to make any initial solution converge on a reconstructed image with a good quality, a new cost function is proposed. Under the condition that the compression rate is 0.0625, it is confirmed that the root mean square error of the proposed method decreases to 27.34% and 86.27% compared with those of the conventional iterative method and a non iterative image reconstruction method, respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.309-312
• /
• 1999

This paper proposed a novel method for pseudo-on-line scheme using look-up table based on the genetic algorithm The technique is an pseudo-on-line method that optimally estimate the parameters of FPID controller for systems with non-linearity using the genetic algorithm which does not use the gradient and finds the global optimum of an unconstraint optimization problem. The proposed controller is applied to speed control of 3-phase induction motor and its computer simulation is carried out. Simulation results show that the proposed method is more excellent then conventional FPID and PID controllers.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.91-101
• /
• 2000

As the computer related technology evolves a study for a practical use of real structure as well as its hteory for optimum design has been greatly advanced. But the study on optimum design of pre-stressed concrete beam(PSC-beam) bridge for the construction of national roads and highways in Korea is not sufficient. Since a standard section for the PSC-beam is proposed, it is practically used in designing the PSC-beam. It is noticed that the section using the current standard PSC-beam design to be an over-designed with its surplus safety factor. Therefore, it is necessary to consider economical PSC-beam section which automatically satisfies all requirement of design specifications. Thus, in this study, the optimum design methods of PSC-beam are carried out using the gradient-based search method and global search method. As a result of the optimum design method, it was confirmed that the design of PSC-beam has a serious properties to non-linearity and discontinuity. And the section that in economical and efficinet design methods than the current standard design method is proposed.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권2호
• /
• pp.85-91
• /
• 2000

This paper proposes a novel method with pseudo-on-line scheme using the optimized look-up table based on the genetic algorithm which does not use the gradient and finds the global optimum of an un-constraint optimization problem. The technique is a pseudo-on-line method that optimally estimates the parameters of fuzzy PID(FPID) controller for systems with non-linearity, using the genetic algorithm. The proposed controller(GFPID) with the auto-tuning function is applied to the on-line and real-time control of speed at 3-phase induction motor, and its computer simulation is carried out. simulation results show that the proposed methodis more excellent that conventional FPID and PID controllers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2386-2388
• /
• 2000

This paper proposes a novel method with pseudo-on-line scheme using look-up table based on the genetic algorithm. The technique is a pseudo-on-line method that optimally estimate the parameters of fuzzy PID(FPID) controller for systems with non-linearity using the genetic algorithm which does not use the gradient and finds the global optimum of an un-constraint optimization problem. The proposed controller(GFPID) is applied to speed control of 3-phase induction motor and its computer simulation is carried out. Simulation results show that the proposed method is more excellent than conventional FPID and PID controllers.

• 유변학
• /
• 제10권4호
• /
• pp.202-216
• /
• 1998

기존의 'Orthotropic' 근사모델의 개선된 형태인 ORW를 새로운 유동 자료를 이용하여 수치적으로 구하였다. 기존의 'Orthotropic' 근사모델인 ORF나 ORL은 특히 전단유동 하에서 상호작용상수 $C_1$<0.001인 경우 비물리적 진동특성을 나타낸다. 물론 center-gated disk와 같은 비균일 유동하에서도 비물리적 진동특성을 나타내고 'Distribution Function Calculation'과 비교하여 배향 상태를 낮게 예측한다. 이런 현상들은 바로 least-square 최적화 시 사용된 유동 자료에 기인한 것을 알 수 있었다. 작은 상호작용계수의 균일 유동 자료를 이용하여 최적화를 한 ORW의 경우 비물리적 진동특성도 나타나지 않았고 균일 및 비균일 유동하에서 모두 정성적으로 잘 일치함을 확인할 수 있었다. 최적화 시 사용된 함수의 선택은 근사모델을 발전시키는데 그다지 영향을 미치지 못하였다. 하지만, 모든 배향 텐서의 eigenvalue들을 고려하면 보다 정량적으로 발전시킬 수 있지만 이들의 함수모양 선택은 중요하고 어려운 문제다. 비교를 위하여 ORW와 다른 여러 가지 근사모델을 이용하여 Film-gated strip과 Center-gated disk에 대한 연계효과 및 평면속도구배를 포함한 사출성형 충전공정의 수치모사를 수행하였다. ORW가 'Distribution Function Calculation' 과 비교하여 정량적으로도 거의 비슷한 결과를 예측함을 보여주지만 실제 실험자료와 비교하였을 때 약간의 차이가 있음을 확인하였다. 따라서 좀 더 정확히 섬유의 배향도를 예측하기 위해서는 섬유들의 상호작용을 나타내는 항의 모델링의 변화가 요구된다.

• Computers and Concrete
• /
• 제2권5호
• /
• pp.345-366
• /
• 2005

This work presents an assessment of the computational performance of a vector-parallel implementation of probabilistic model for concrete cracking in 3D. This paper shows the continuing efforts towards code optimization as reported in earlier works Paz, et al. (2002a,b and 2003). The probabilistic crack approach is based on the direct Monte Carlo method. Cracking is accounted by means of 3D interface elements. This approach considers that all nonlinearities are restricted to interface elements modeling cracks. The heterogeneity governs the overall cracking behavior and related size effects on concrete fracture. Computational kernels in the implementation are the inexact Newton iterative driver to solve the non-linear problem and a preconditioned conjugate gradient (PCG) driver to solve linearized equations, using an element by element (EBE) strategy to compute matrix-vector products. In particular the paper analyzes code behavior using OpenMP directives in parallel vector processors (PVP), such as the CRAY SV1 and CRAY T94. The impact of the memory architecture on code performance, and also some strategies devised to circumvent this issue are addressed by numerical experiment.

• 전기학회논문지
• /
• 제62권4호
• /
• pp.554-561
• /
• 2013

In this paper, we introduce a modeling and a process simulator developed with the aid of pRBFNNs for activated sludge process in the sewage treatment system. Activated sludge process(ASP) of sewage treatment system facilities is a process that handles biological treatment reaction and is a very complex system with non-linear characteristics. In this paper, we carry out modeling by using essential ASP factors such as water effluent quality, the manipulated value of various pumps, and water inflow quality, and so on. Intelligent algorithms used for constructing process simulator are developed by considering multi-output polynomial radial basis function Neural Networks(pRBFNNs) as well as Fuzzy C-Means clustering and Particle Swarm Optimization. Here, the apexes of the antecedent gaussian functions of fuzzy rules are decided by C-means clustering algorithm and the apexes of the consequent part of fuzzy rules are learned by using back-propagation based on gradient decent method. Also, the parameters related to the fuzzy model are optimized by means of particle swarm optimization. The coefficients of the consequent polynomial of fuzzy rules and performance index are considered by the Least Square Estimation and Mean Squared Error. The descriptions of developed process simulator architecture and ensuing operation method are handled.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.26-32
• /
• 2005

본 연구에서는 반응표면법에 다항함수, 지수함수, 로그함수등을 적용한 다양한 회귀함수를 이용하여 최적화를 수행하였다. 이를 검증하기 위해 트러스 구조와 하니콤 복합재 플랫폼에 대하여 응력 및 고유진동수를 고려하여 최적설계를 수행하였다. 근사함수를 효과적이고 용이하게 하는 방법을 실험계획법이라 하는데 중심합성법, 요인설계법, 회전계획법, 심플렉스법 등이 있으며, 본 연구에서는 중심합성법을 이용하여 반응표면을 생성하였다. 이를 위하여 구조해석 코드로 MSC/NASTRAN을 사용하였으며 최적설계 프로그램은 중심합성법을 기반으로 하여 다양한 회귀모델에 의한 반응표면을 적용하여 작성하였다. 또한 이 결과를 기존의 도함수를 이용한 최적화 기법이나 유전자알고리즘을 이용한 최적화 결과와 비교하여 반응표면법의 설계상의 장점 및 반응표면 생성 시 다양한 회귀모델에의 사용에 대한 신뢰성을 확인하였다.