• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.4
• /
• pp.387-392
• /
• 1995

Though a variety of non-conventional feedstuffs have been successfully evaluated in research stations in Asian countries, there had been little adoption of these technologies at the small farm level. The methodology and results of three separate on-farm trials evaluation the possible use of some non-conventional feedstuffs in broiler diets under small farm conditions in Sri Lanka are reported in this paper. In all trials, the commercial mash, that in normally used in the farms, served as the control. In trials 1 and 2, 5 and 10% cassava leaf meal, respectively, was substituted (w/w) for the commercial mash and fed to broilers for six weeks. In trial 3, several non-conventional feedstuffs (cassava leaf meal, rubber seed meal, ipil ipil leaf meal and died poultry manure) were substituted (w/w) for the commercial mash at levels of 15-20%. The results demonstrated that these non-conventional feed resources can be used in broiler diets under small farm conditions, with no adverse effects on performance. The salient features of on-farm animal research are highlighted.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1469-1474
• /
• 2003

Twenty four weaner lambs, eight each of Marwari, Patanwadi and Merino${\times}$Patanwadi breeds (9.9 to 10.8 kg) were randomly divided into two dietary treatments on body weight basis Viz. $T_1$-conventional (Maize-38%, GN Cake-25%, Rice Polish-24%, Jaggery solution-10%, Mineral mixture-3%) and $T_2$-supplemented non conventional group (GN Cake-25%, Rice Polish-14%, Mango seed kernel-25%, Babul Pods chuni-23%, Jaggery solution-10%, Mineral mixture-3%). The Jaggery solution was prepared by mixing 6.5 kg Jaggery and 3.5 kg water. The average final body weight at the end of the experiment was recorded to be $19.33{\pm}0.76$ and $19.72{\pm}0.8kg$ in conventional and non-conventional groups, respectively. The total dry matter intake (DMI) during the entire experiment period was recorded to be $89.56{\pm}5.19$ and $95.08{\pm}1.06$ (kg/head) and $532.83{\pm}9.94$ and $566.75{\pm}10.49g/d$ in conventional and nonconventional groups, respectively. The body weight gain and body measurements did not influenced by diet. The ration effect was found to be significant when the DMI was expressed in terms of g/d. The crude protein (CP) and digestible crude protein (DCP) intake/head and per kg gain observed during experiment under conventional and non-conventional treatment group did not differ from each other. However, the total digestible nutrients (TDN) intake per kg gain was significantly (p<0.05) higher in supplemented non-conventional group. The intake values of DCP and TDN were more or less in agreement with Indian Council Agricultural Research (1985) recommendations. The estimated total feed cost (Rs./animal) for experimental lambs was $274.16{\pm}8.57$ and $242.67{\pm}5.10$ in conventional and non- group, respectively. The non-conventional group had significantly (p<0.05) lower feed cost (11.6%). The return as percent of feed cost and feed cost/kg dressed weight were $92.89{\pm}5.58$ (%) and Rs. $35.40{\pm}1.11$ and $122.61{\pm}5.06$ (%) and Rs.$30.47{\pm}1.71$ in conventional and non-conventional group (p<0.05), respectively which is the reflection of significantly lower total feed cost incurred during feeding in non-conventional group. Lambs fed non-conventional based diet had similar live weights as those fed conventional diets but costed less money to achieve those weights.

• CELLMED
• /
• v.3 no.1
• /
• pp.4.1-4.3
• /
• 2013

Times are changing in Italian healthcare and Traditional and Non Conventional Medicine has become increasingly relevant to medical practice. With this comes an increasing need for guidelines. As the use of Traditional and Non Conventional Medicine has increased in Italy, so has the need for high standards in education in this field (outside of biomedicine and the dominant health system) among medical students, medical doctors and medical educators. The rise of Traditional and Non Conventional Medicine is so relevant for medical practice and health care in Italy; the time calls for a change. The article describes this new setting in regards to education in Acupuncture within the field of Traditional Chinese Medicine in Italy's oldest private school.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.460-466
• /
• 1999

The huge amount of demand for feedgrains from this region could not possibly be met by producing countries from the other regions. In order to fulfill this increasing demand for conventional raw materials, an alternative for the conventional raw materials produced in the Asia and Pacific region is becoming increasingly more important. A potential alternative is concentrates or non-conventional concentrates produced locally in relative abundance in this region. These feedstuffs include feed grains, by-products from the milling, sugar industries, brewing and distilling industries. Vegetable, citrus, and animal by-products from abattoir, feather meal and blood meal are also possibilities. In addition to more widespread use of unconventional feed sources, the following approach is recommended to improve utilization and performance. These include establishing the nutritive value of non-conventional feeds, quality control to minimize variability, proper storage and processing to assure the nutritive value and prevent mycotoxin contamination, properly balance amino acids with protein sources, supplementation with synthetic amino acids and the use of enzymes to increase digestibility. Currently, practical applications for these resources in feed formulation are negligible despite the potential. The socio-economic aspects will dominate the use of these non-conventional concentrates. In the future, the feed industry will resolve the problems in using locally available raw feed materials.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.48-54
• /
• 2021

In most existing researches on non-orthogonal multiple access (NOMA) with symmetric superposition coding (SSC), uniform sources have been usually considered. For the first part in this two-part paper, for the strongest channel gain user, we showed that the bit-error rate (BER) for the optimal maximum a-posteriori (MAP) receiver for the non-uniform source improves slightly, compared to that of the conventional receiver for the uniform sources. We demonstrate that in communication scenarios of the non-uniform source NOMA schemes, for the weakest channel gain user, the BER performance of the optimal MAP receiver for a non-uniform source improves greatly, compared to that of the conventional receiver for uniform sources. We first derive an analytical expression of the BER for non-uniform source NOMA with SSC. Then, simulations demonstrate that the BER of the optimal MAP receiver for the non-uniform source improves, compared with that of the conventional maximum likelihood (ML) receiver for the uniform sources. In result, the proposed optimal MAP receiver for the non-uniform source could be a promising scheme for SSC NOMA, with improved BER performances.

• 한국연소학회:학술대회논문집
• /
• 2004.06a
• /
• pp.49-56
• /
• 2004

A two-dimensional twin-jet counterflow system has been designed, in which two streams from two double-slit nozzles form a counterflow. This flow system enables one to systematically investigate various effects on non-premixed flames, including the non-premixed flame interaction, the edge flame behavior and the effect of curvature. Non-premixed flame interaction in the twin-jet counterflow system has been investigated numerically for methane fuel diluted with nitrogen. Three types of non-premixed flame(conventional counterflow flame, crossed twin-jet flame and petal shaped flame) were simulated depending on the combination of fuel/oxidizer supply to each nozzle. The extinction characteristics of non premixed methane flame in the twin-jet counterflow have been investigated numerically. The boundary of the existence of petal-shaped flames was identified for the twin-jet counterflow flames. Due to the existence of the unique petal-shaped flames, the extinction boundary for the twin-jet counterflow can be extended significantly compared to that for the conventional counterflow non-premixed flames, through the interaction of two flames. Through the comparison of the crossed twin-jet flame and the conventional counterflow flame, structure of the crossed twin-jet counterflow flame is analysed. Through the comparison of the petal shaped flame and the conventional counterflow flame, the extension of the extinction boundary for the twin-jet counterflow is investigated.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.8
• /
• pp.391-400
• /
• 2017

Software architecture plays a key role in satisfying non-functional requirement (NFR), i.e. quality requirements and constraints. Architecture design methods and tactics for conventional NFR are largely available in literatures. However, the methods for the target system-specific non-conventional NFRs are not readily available; rather architects should invent the design methods from their experiences and intuitions. Hence, the hardship to design architectures for non-conventional NFRs is quite high. In this paper, we provide a systematic architecture design methodology for non-conventional NFRs. We provide a five-step process, and detailed instructions for the steps. In the process, we treat the traceability among artifacts and seamlessness as essential values for supporting effective architecture design. We apply the methodology on designing architectures for a platform software system. We believe that the proposed methodology can be effectively utilized in designing high quality architectures for non-conventional NFRs.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1604-1605
• /
• 2011

This paper deals with the partial discharge detection in order to recognize with three different nature of artificial defects using non-conventional HF-VHF PD sensor of which two measuring position are chosen along the 22.9kV XLPE power cable specimen. The response of the sensor under investigation has been observed be significantly affected by the cable length from the PD sources. As a result, it seems that the detecting sensor position is very important for the analysis of the nature of PD source. Moreover, it could be suggested that any standardized calibration method should be established replacing IEC 60270 as far as any type of non-conventional sensors are concerned.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.449-459
• /
• 1999

Non-conventional roughage (NCR) is shrub and tree fodders, crop residues and agroindustrial oy-products which is not commonly used as livestock feed traditionally and commercially. Eventhough many sources of NCR is available, the farmers perceptions on NCR not only vary from country to country in tropical and sub-tropical Asian-Australasian countries, but also vary from region to region within the country. Chemical composition and nutritive value of NCR are not only vary from species to species but also vary between species within the genera, between provenances/cultivars within the species and such variations are affected by season, climatic zone, topography and land utilization. The nutritive value of NCR can be improved by physical, chemical and biological treatments and conservation. Feeding NCR to ruminant and non-ruminant is not only improve performance of the livestock but also economically feasible. Future direction of NCR is inventarization, exchange information through NCR information centre, integration with either agrisilvicultural, agrisilvipastoral or silvipastoral system, and use of genetic engineering to produce high quality NCR that ultimately become conventional roughage for agroindustry and agribissiness.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.347-350
• /
• 2006

The conception of early streamers is in sufficient and inadequate as a parameter for the determination of any advantage of early streamer emission(ESE) lightning rods versus ordinary lightning rods. Thus, standards for many other national and international lightning protection as well as KS C IEC 61024-1 do not take ESE lightning rods, charge dissipation systems or non-conventional lightning rods. Unfortunately, many non-conventional lightning rods such as ESE lightning rods and charge dissipation systems in Korea are increasingly used in lightning protection of structures including explosive manufacturing buildings, electric generating, transmission and distribution systems. This study attempts to make aware of no advantage of ESE rods and other non-conventional lightning protection systems and to investigate the present status of installations of ESE lightning rods.