• Journal of the Korean institute of surface engineering
• /
• v.39 no.6
• /
• pp.282-287
• /
• 2006

Viscosities of $LaCl_3-NaCl$ binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities were decreased with the content of NaCl for all over the composition range of binary melts. Composition - viscosity relation for the binary melts show a non-linear from the additivity line and the deviations shows a maximum at about 60 mol% NaCl. This suggests the existence of the complex ion of $LaCl_4^-$ in the melt. Activation energy for viscous flow of the binary melts decrease monotonously with the increasing content of NaCl.

• Korea-Australia Rheology Journal
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2007

The flow characteristics of chicken blood in a micro-tube with a $100{\mu}m$ diameter are investigated using a micro-Particle Image Velocimetry (PIV) technique. Chicken blood with 40% hematocrit is supplied into the micro-tube using a syringe pump. For comparison, the same experiments are repeated for human blood with 40% hematocrit. Chicken blood flow has a cell-free layer near the tube wall, and this layer's thickness increases with the increased flow speed due to radial migration. As a hemorheological feature, the aggregation index of chicken blood is about 50% less than that of human blood. Therefore, the non-Newtonian fluid features of chicken blood are not very remarkable compared with those of human blood. As the flow rate increases, the blunt velocity profile in the central region of the micro-tube sharpens, and the parabolicshaped shear stress distribution becomes to have a linear profile. The viscosity of both blood samples in a low shear rate condition is overestimated, while the viscosity in a high shear rate range is underestimated due to radial migration and the presence of a cell-depleted layer.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.29-36
• /
• 2000

The shape of the polymers in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(n-OC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts was examined by rheological measurements, and its relation with fiber drawing behavior of the solutions was described. It was found that fibers could be drawn in the viscosity range 1~100 P from the acid-catalyzed solutions with lower water contents of the molar ratio H2O/alkoxide, $r{\leq}2$. On the other hand, no fiber could be drawn from the acid-catalyzed solutions including a large amount of water($r{\geq}4$) and the base-catalyzed solutions. The relation between the intrinsic viscosity [${\eta}$] and number average molecular weight ${\bar{M}}n$, namely $[{\eta}]=K{\bar{M}}n{\alpha}$, has shown that the acid-catalyzed spinnable solution (r = 1 and 2) had linear polymers where the exponent a's were about 0.56 and 0.81, whereas non-spinnable solutions (r = 4 and 8) had three dimensional network polymers or spherical particles where the exponent a's were 0.41-0.51 and 0.35.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.94-103
• /
• 2015

The turbulent flow characteristics in the channel flow are investigated using large eddy simulation(LES) of FDS code, built in NIST(USA), in which the near-wall flow is solved by Werner-Wengle wall function. The periodic flow condition is applied in streamwise direction to get the fully developed turbulent flow and symmetric condition is applied in lateral direction. The height of the channel is H=1m, and the length of the channel is 6H, and the lateral length is H. The total grid is $32{\times}32{\times}32$ and $y^+$ is kept above 11 to fulfill the near-wall flow requirement. The Smagorinsky model is used to solve the sub-grid scale stress. Smagorinsky constant $C_s$ is 0.2(default in FDS). Three cases of Reynolds number(10,700, 26,000, 49,000.), based on the channel height, are analyzed. The simulated results are compared with direct numerical simulation(DNS) and particle image velocimetry(PIV) experimental data. The linear low-Re eddy viscosity model of Launder & Sharma and non-linear low-Re eddy viscosity model of Abe-Jang-Leschziner are utilized to compare the results with LES of FDS. Reynolds normal stresses, Reynolds shear stresses, turbulent kinetic energys and mean velocity flows are well compared with DNS and PIV data.

• Tribology and Lubricants
• /
• v.20 no.5
• /
• pp.225-230
• /
• 2004

Most studies of elsatohydrodynamic lubrication are oriented only to the measurement of film thickness itself with optical interferometer. In order to exactly investigate the tribological characteristics of a certain lubricant, it is also important to get the information of traction behaviors as well. In this work, we developed a device for measuring the friction force of ehl contact condition as well as the film thickness. To verify the validity of the measuring system, the friction forces and film thicknesses under ehl condition are simultaneously measured with the variations of additive ratios of viscosity index improvers which cause non-linear tendencies of film thickness to contact velocity.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.220-226
• /
• 1994

The hydrolysis and condensation reactions in the mixed alkoxide solutions of Si(OC2H5)4 and Zr(O-nC3H7)4 with various water contents (1, 2, 4, and 8 in molar ratio to alkoxide, r) and catalysts were examined by rheological measurements and the number average molecular weight in order to explain the shape of the polymer in the mixed alkoxide solutions. It was found that fibers could be drawn in the viscosity range of 1∼100P from the acid-catalyzed solutions with lower water contents of the mole ratio H2O/alkoxide, r 2. On the other hand, crack free bulk gel was formed from the acid-catalyzed solutions including a large amount of water (r 4), and the base-catalyzed solutions. The relation between the intrinsic viscosity [{{{{ eta }}] and the number average molecular weight n, namely [{{{{ eta }}]=Knα, has shown that the acid-catalyzed spinnable solutions (r=1 and 2) have linear polymers and the exponent α's are about 0.56 and 0.81, whereas non-spinnable solutions (r=4 and 8) have three dimensional network polymers or spherical particles and the exponent α's are 0.41∼0.51 and 0.35.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.2
• /
• pp.87-92
• /
• 2013

Viscosities of $LaCl_3$-CsCl binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200 K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities of melted $LaCl_3$ were decreased with the content of CsCl for all over the composition range of binary melts. Composition versus viscosity relation for the binary melt showed a non-linear relationship from the additivity line and the deviations showed a maximum value at about 60 mol% CsCl. This suggest the existence of the complex ion of $LaCl_4{^-}$ in the melt. Activation energy for the viscous flow of the binary melts decreased monotonously with the increasing content of CsCl after a few increasement till 40 mol% CsCl. All of these results were the resemble with the viscosities of $LaCl_3$-NaCl binary melts.

• Macromolecular Research
• /
• v.8 no.1
• /
• pp.12-18
• /
• 2000

Six aromatic polyesters with ether-linkages were prepared from 4,4'-oxybis(benzoic acid) and naphthalenediol (ND) isomers which were 1,4-, 1,5-, 1,6-, 2,3-, 2,6- and 2,7-derivatives. The solution viscosity numbers ranged from 0.23 to 0.65 dL/g. The glass transition temperatures ranged from 142 to 179$\^{C}$. The initial decomposition temperatures were all above 400$\^{C}$, and the residue weights at 600$\^{C}$ were in the range of 50-64%. Only the polyesters derived from 1,5- and 2,6-NDs, which have a linear linking mode, were found to be semicrystalline and could form thermotropically nematic phase. Multiple melting phenomena and annealing of the polyester derived from 1,5-ND and related polymers are described. The experimental results show that the polyester derived from 1,4-ND of linear shape was amorphous and non-liquid crystalline. Particularly, the polyester derived from 2,3-ND could form a smectic mesophase as banana-shaped molecules, and this is ascribed to the C/sub_2v/ symmetry where highly kinked molecules are packed in the same direction.

• Journal of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.97-107
• /
• 1995

The stability of the geometrically thin, two-temperature hot accretion disk is studied. The general criterion for thermal instability is derived from the linear local analyses, allowing for advective cooling and dynamics in the vertical direction. Specifically, classic unsaturated Comptonization disk is analysed in detail. We find five eigen-modes: (1) Heating mode grows in thermal time scale, $(5/3)({\alpha}{\omega})^{-1}$, where alpha is the viscosity parameter and w the Keplerian frequency. (2) Cooling mode decays in time scale, $(2/5)(T_e/T_i)({\alpha}{\omega})^{-1}$, where $T_e\;and\;T_i$ are the electron and ion temperatures, respectively. (3) Lightman-Eardley viscous mode decays in time scale, $(4/3)(\Lambda/H)^2({\alpha}{\omega})^{-1}$, where $\Lambda$ is the wavelength of the perturbation and H the unperturbed disk height. (4) Two vertically oscillating modes oscillate in Keplerian time scale, $(3/8)^{1/2}\omega^{-1}$ with growth rate $\propto\;(H/\Lambda)^2$. The inclusion of dynamics in the vertical direction does not affect the thermal instability, adding only the oscillatory modes which gradually grow for short wavelength modes. Also, the advective cooling is not strong enough to suppress the growth of heating modes, at least for geometrically thin disk. Non-linear development of the perturbation is followed for simple unsaturated Compton disk: depending on the initial proton temperature perturbation, the disk can evolve to decoupled state with hot protons and cool electrons, or to one-temperature state with very cool protons and electrons.

• Korea-Australia Rheology Journal
• /
• v.12 no.3_4
• /
• pp.143-149
• /
• 2000

In this article, we considered shear-induced microstructure and rheological behavior of micellar solutions of cationic surfactant, cetylpyridinium chloride (CPC) in the presence of a structure-forming additive, sodium salicylate (NaSal). Shear viscosity, shear moduli and flow birefringence were measured as functions of the surfactant and additive concentrations. In the presence of NaSal, the micellar solution exhibited the non-linear rheological behavior due to the formation of supramolecular structures when the molar ratio of NaSal to CPC exceeded a certain threshold value. Flow birefringence probed the change in micelle alignment under shear flow. At low shear rates, the flow birefringence increased as the shear rate increased. On the other hand, fluctuation of flow birefringence appeared from the shear rate near the onset of shear thickening, which was caused by shear-induced coagulation or aggregation. These results were confirmed by the SEM images of in situ gelified micelle structure through sol-gel route.