• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.157-161
• /
• 2017

$(1-x)Bi_{0.5}(Na_{0.78}K_{0.22})_{0.5}TiO_3-xLaFeO_3$ ceramics were fabricated using a solid state reaction method. The microstructural, ferroelectric and piezoelectric properties were characterized using X-ray diffraction (XRD), scanning electron microscope (SEM), and polarization hysteresis loops (P-E). XRD results indicated that BNKT ceramic crystal structure modified by $LaFeO_3$ was transformed from a ferroelectric tetragonal to a non-polar pesudo-cubic phase with increased $LaFeO_3$ content. The improved piezoelectric properties resulted from the addition of $LaFeO_3$ up to 3 mol%. The $LaFeO_3$ 3mol% sample showed markedly improved piezoelectric and strain behaviors in comparison with pure BNKT ceramic.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.398-398
• /
• 2013

The electronic properties and the local structure of tantalum oxide thin film with variation of oxygen flow rate ranging from 9.5 to 16 sccm (standard cubic centimeters per minute) have been investigated by X-ray photoelectron spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), and X-ray absorption spectroscopy (XAS). The XPS results show that the Ta4f spectrum for all films consist of the strong spin-orbit doublet $Ta4f_{7/2}$ and $Ta4f_{5/2}$ with splitting of 1.9 eV. The oxygen flow rate of the film results in the appearance of new features in the Ta4f at binding energies of 23.2 eV, 24.4 eV, 25.8, and 27.3 eV, these peaks attribute to $Ta^{1+}$, $Ta^{2+}$, $Ta^{4+}$/$Ta^{2+}$, and $Ta^{5+}$, respectively. Thus, the presence of non-stoichiometric state from tantalum oxide ($TaO_x$) thin films could be generated by the oxygen vacancies. The REELS spectra suggest the decrease of band gap for tantalum oxide thin films with increasing the oxygen flow rate. The absorption coefficient ${\mu}$ and its fine structure were extracted from the fluorescence mode of extended X-ray absorption fine structure (EXAFS) spectra. In addition, bond distances (r), coordination numbers (N) and Debye-Waller factors (${\sigma}^2$) each film were determined by a detailed of EXAFS data analysis. EXAFS spectrapresent both the increase of coordination number of the first Ta-O shell and a considerable reduction of the Ta-O bond distance with the increase of oxygen flow rate.

• Korean Journal of Community Nutrition
• /
• v.17 no.3
• /
• pp.329-340
• /
• 2012

Hypertension is a well-known risk factor for cardiovascular disease. Previous studies have shown that changes in diet and lifestyle factors can prevent the development of hypertension, but the combined effects of these modifiable factors on hypertension are not well established. The objective of this study is to investigate associations of diet and lifestyle factors, evaluated both individually and in combination, with prevalent hypertension among Korean adults. We analyzed data obtained from the 2007-2008 Korean National Health and Nutritional Examination Survey, a nationwide cross-sectional study using a stratified, multistage probability sampling design. The associations of 12 nutrient intakes and lifestyle factors with risk of hypertension were explored using restricted cubic spline regression and logistic regression models among 6,351 adults. Total energy and several nutrients and minerals, including, calcium, vitamin A, vitamin C, and sodium, showed non-linear relationships with the risk of prevalent hypertension. In multivariate logistic regression models, dietary score, obesity and alcohol intake were independently associated with the risk of prevalent hypertension, but smoking and physical activity were not. Overall, participants whose dietary habits and lifestyle factors were all in the low-risk group had 68% lower prevalence of hypertension (OR: 0.32, 95 CI: 0.14-0.74) compared to those who were at least one in the high-risk group of any dietary or lifestyle factors. The result suggests that combined optimal lifestyle habits are strongly associated with lower prevalence of hypertension among Korean adults.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.75-82
• /
• 1991

The present paper describes a preliminary design method by using the computer graphics for creation of the fore and after body profiles of fishing vessel. It is well known that the Form Parameter design method has some merits at an early stage of design, and the B-spline curve generation technique has some prior properties in representing hull form with the computer graphic. The B-spline curve generation technique combined with the form parameter design method is employed to generate the profiles of fishing vessel. For fore body the stem profiles with bulbous bulb or without one are considered. And for after body the stern profiles of cruiser type and the transom type are generated with stern bulb or with shoe piece. Several examples will shown.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.392-396
• /
• 1999

Superconducting YBa$_2Cu_3O_{7-{\delta}}$(YBCO) thin films were grown on Hastelloy(Ni-Cr-Mo alloys) with CeO$_2$ buffer layer in-situ by pulsed laser deposition in a multi-target processing chamber. To apply superconducting property on power transmission line, we have deposited YBCO thin film on flexible metallic substrate. However, it is difficult to grow the YBCO films on flexible metallic substrates due to both interdiffusion problem between metallic substrate and superconducting overlayers and non-crystallization of YBCO on amorphous substrate. It is necessary to use a buffer layer to overcome the difficulties. We have chosen CeO$_2$ as a buffer layer which has cubic structure of 5.41 ${\AA}$ lattice parameter and only 0.2% of lattice mismatch with 3.82 ${\AA}$ of a-axis lattice parameter of YBCO on [110] direction of CeO$_2$ In order to enhance the crystallization of YBCO films on metallic substrates, we deposited CeO$_2$ buffer layers with varying temperature and 02 pressure. By XRD, it is observed that dominated film orientation is strongly depending on the deposition temperature of CeO$_2$ layer. The dominated orientation of CeO$_2$ buffer layer is changed from (200) to(111) by increasing the deposition temperature and this transition affects the crystallization of YBCO superconducting film on CeO$_2$ buffered Hastelloy.

• Transactions of Materials Processing
• /
• v.29 no.3
• /
• pp.163-171
• /
• 2020

We present a multi-step cold drawing for a non-equiatomic Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ high entropy alloy (HEA) with a simple face-centered cubic (FCC) crystal structure. The distribution of strain in the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires was analyzed by the finite element method (FEM). The effective strain was expected to be higher as it was closer to the surface of the wire. However, the reverse shear strain acted to cause a transition in the shear strain behavior. The critical effective strain at which the shear strain transition behavior is completely shifted was predicted to be 4.75. Severely cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wires up to 96% of the maximum cross-sectional reduction ratio were successfully manufactured without breakage. With the assistance of electron back-scattering diffraction and transmission electron microscope analyses, the abundant deformation twins were found in the region of high effective strain, which is a major strengthening mechanism for the cold-drawn Co₁₀Cr₁₅Fe₂₅Mn₁₀Ni₃₀V₁₀ HEA wire.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.113-122
• /
• 2015

This study aims to evaluate future stream flow by the operation of agricultural reservoir group at the upper stream of the Miho River. Four agricultural reservoirs with storage capacities greater than one million cubic meters within the watershed were selected, and the RCP 8.5 climate change scenario was applied to simulate reservoir water storage and stream flow assuming that there are no changes in greenhouse gas reduction. Reservoir operation scenarios were classified into four types depending on the supply of instream flow, and the water supply reliability of each reservoir in terms of water supply under different reservoir operation scenarios was analyzed. In addition, flow duration at the watershed outlet was evaluated. The results showed that the overall run-off ratio of the upper stream watershed of the Miho River will decrease in the future. The future water supply reliability of the reservoirs decreased even when they did not supply instream flow during their operation. It would also be difficult to supply instream flow during non-irrigation periods or throughout the year (January-December); however, operating the reservoir based on the operating rule curve should improve the water supply reliability. In particular, when instream flow was not supplied, high flow increased, and when it was supplied, abundant flow, ordinary flow, and low flow increased. Drought flow increased when instream flow was supplied throughout the year. Therefore, the operation of the agricultural reservoirs in accordance with the operating rule curve is expected to increase stream flow by controlling the water supply to cope with climate change.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.4
• /
• pp.249-255
• /
• 2009

The main object of this study was to prepare of w/o emulsion including glyceryl monooleate(GMO) and to evaluate its stability by using the recently developed $Turbiscan^{(R)}LAB$. GMO is the polar oily surfactant with the low HLB value, and it forms the gel phase of cubic structures after dissolves in aqueous media. Phosphate buffer solution (PBS) of pH 7.4 was prepared as the water phase and Marcol 52(mineral oil) was used as the oil phase in this study. GMO was used as the surfactant of W/O emulsion. W/O emulsion using GMO alone as a surfactant was very unstable. But the emulsion using both GMO and poloxamer 407 was more stable. The stability of W/O emulsions was evaluated after centrifuging the emulsions. But it was difficult with naked eye because an opaque and concentrated system like W/O emulsion was very turbid. So $Turbiscan^{(R)}LAB$ was used to detect the destabilization phenomena in non-diluted emulsion. As a result, the W/O emulsion using the proper amounts of GMO and poloxamer 407 was more stable among them using GMO of various amounts. But it seems that the other element for the stability of W/O emulsion including GMO was required. Furthermore, the $Turbiscan^{(R)}LAB$ was a very efficient analyzer for evaluating the physical stability of emulsion.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.147-159
• /
• 2010

The touch screen phone launched domestically in Korea, unlike the existing plane UI, it applied a cubic shape of 3D UI which provides three dimensional solid graphic. This study proposes to examine the correlation between the users' experience of 3D GUI, which were made by two different companies, and the brand. From this point of view, this study sets up a hypothesis about intimate correlation between individual differentiated brand and the user experience. Base on that, a model was designed. This study measured the satisfaction of user experience through the disclosure and non-disclosure of brand, focusing on 3D GUI cases which were launched so far, and it demonstrated that there was a clear difference in the degree of satisfaction. Through this examine, a brand was confirmed as one of the important element of user experience in using the 3D GUI that was launched competitively by companies. Therefore, the result of this study suggest that the designers need to establish strategies that make the brand as the core subject of design during the process of manufacturing product and service.

• Journal of Forest and Environmental Science
• /
• v.25 no.3
• /
• pp.167-175
• /
• 2009

An exploratory study was conducted in Juri Forest Range-2, a proposed biodiversity conservation area of Bangladesh to explore the present growing stock of tree, regeneration condition and status of non-timber forest products (NTFPs). This conservation area contains both natural and artificial plantation was selected by using multistage random sampling method. For determination of plot size and sampling methods, the quadrate size ($10m{\times}10m$) for tree stock measurement, ($2m{\times}2m$) for regeneration survey, ($20m{\times}20m$) for NTFPs survey was determined. Regarding tree stock survey, 14 species under eight families were found where Tectona grandis shows average number of stem/ha was 624 and basal area/ha was (10.36 $m^2/ha$) followed by Acacia auriculiformis (0.2 $m^2/ha$ and 637 stem/ha), Gmelina arborea (0.2 $m^2/ha$ and 600 stem/ha). In regeneration survey, 14 species were found belonging to 9 families where Alstonia scholaris shows highest (3,750) seedling per hectare. Regarding NTFPs, bamboo and cane are the most common resources. In last ten years, the total timber output was 1,28,596.14 cubic feet and total amount of revenue was 4,64,434 US$. The vacant area is 1,335.5 acre which contains 14% of total area. If this vacant area is planted with suitable species and take proper steps for appropriate management of this species it will be a good biologically diversified area.