• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.1
• /
• pp.34-43
• /
• 1996

Determining the actual evapotranspiration(ETa) of a crop, and appropriate water management of the crop based on the ETa are very important For increasing the yield. The present study aimed at determining ETa and crop coefficient of sesame growing under different climatic conditions with the transparent thin polyethylene film mulch(0.03 mm thick) and without this mulch. Bottomless cylindrical lysimeters(105cm in diameter, 120cm in height, protruded 20 cm above the soil surface) were installed on the field of sandy loam "Bonyang series" soil with a moderate drainage. The determination of ETa was performed by measuring each component of a model equation, $ETa=(R+I)-\{Ro+(D1+D2)\}+C{\pm}{\Delta}S$. Sesame, cv. "Ansan" was sown in two rows with the spacing of $50{\times}15cm$ on May 10 in 1991 and 1992. The mulching covers 80% of the soil surface. Sesame consumed the water of 139.0 mm(1.53 mm/day) and 171.2 mm(1.59 mm/day) in ETa without the film mulch, but that of 132.6 mm(1.46 mm/day) and 199.8 mm(1.85 mm/day) with its mulching through both years of 1991 and 1992, respectively. The ETa's accounted for 52 and 69% of the potential evapotranspiration(ETp) in the mulched crop, and 54 and 59% of ETp in the non-mulched crop 1991 through 1992, respectively. Its ETa's were much more and their gap between the mulching and non-mulching treatment was larger in 1992 than in 1991 as a result of the better climatic condition of 1992.

• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.156-164
• /
• 1995

The study was carried out to elucidate the influenced of shading and mulching with polyethylen vinyl on growth and yield of Cinidium officinale Makino, and improve the cultivation method of those medicinal plants in northern area of Gyeong-buk province, Korea. Top fresh weight of Cinidium officinale Makino was increased by both 35 % and 55% shading compared to the non-shadingand decreased by 75 % shading, but that of Ligusticum chuanxing Hart. Was decreased by the shading tested The summer wilt of Cinidium officinale Makino severely occurred in non-shading but greatly reduced by 55 % or 75 %shading, while no difference was observed in Ligusticum chuanxing Hort, between the shading and the non-shading. Dry root yield Cinidium officinale Makino was increased by 17 % and 19 % in 35 % and 55 % shading levels, respectively, compared to the dry root yield(254kg/10a) in non-shading. However, it was decreased in Ligusticum chuaxing Hort. by the shading. Emergence ratio of Cinidium officinale Makino was increased by black polyethylen vinyl mulch but decreased by transparent polyethylen vinyl mulch, compard to non-mulch. Polyethylen vinyl mulch increa­sed the top fresh weight of Cinidium officinale Makino Especialy black polythylen vinyl mulch was very effective on increasing the top fresh weight. Dry root yield of Cinidium officinale Makino was increased by 32 % and 30 %, respectively, compared to the non-shading.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.511-514
• /
• 2012

Polyethylene mulches have been used for weed control in vegetable production in Korea. One of the additional benefits associated with polyethylene mulches is soil warming. The objective of this study was to evaluate the effects of colored mulches on soil temperature change and Chinese cabbage yield. Mulch treatments were green (GV), black (BV), transparent (TV), and non-mulched (NM) soil. The highest soil-warming effect occurred under green mulch, and the lowest effect was found under black mulch. Daily mean values of soil temperature (10 cm depth) under GV were $2^{\circ}C$ higher than in NM soil. At midday (16:00), mean soil temperature was higher by $3.9^{\circ}C$ in GV, $3.1^{\circ}C$ in BV, and $2.1^{\circ}C$ in TV as compared to NM soil. At night (20:00-06:00), there was no significant difference in soil temperature among the treatments of different colored mulch, but soils in the mulch treatments were $2.4^{\circ}C$ higher as compared to NM soil. As compared with NM, the yield of Chinese cabbage under GV, BV, and TV were higher by 6.0, 26.0, and 12.0%, respectively.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.326-332
• /
• 2015

The effect of biodegradable mulching film on the growth and development of garlic were investigated in order to develop eco-friendly weed control techniques. The treatments included biodegradable film (Bio-De) and black (Black-PE), green (Green-PE), transparent (Trans-PE) polyethylene mulching films. Non-mulched, bare soil (Non-mulching) was used as a control. Light transmittance value among tested mulching films was the highest in Trans-PE (86.1%) followed by Bio-DE and Green-PE, and the lowest value was observed for the Black-PE (1.1%). All mulching films without exclusion elevated soil temperature, especially Trans-PE and Bio-DE compared to bare soil. Plant height and mean bulb weight were increased due to mulching films with the highest values observed for Trans-PE and Bio-DE treatments. After seven months of field application there were no significant degradation signs on PE plastic films, whereas it was easy to see horizontal cracks on the Bio-DE film surface after five month of usage.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.37-46
• /
• 2022

Recently, our society and environment has changed rapidly due to the pandemic caused by the COVID-19 virus. In this rapidly changing environment, companies fulfill their social responsibilities and require non-financial elements of transparent management activities. ESG has become one of the non-financial factors, and interest of ESG management is increasing worldwide. In this paper, we examine the importance of ESG concept and ESG management performance and the correlation with companies, and examine the necessity of ESG management for companies in the future. The literature reviews are conducted on CU which is currently best practicing ESG management through various secondary data. Also, we used interview articles so that reflect the rich voice of the distribution industry. In addition, after examining ESG characteristics through examples of global companies, we looked at BGF Retail's CU convenience store ESG activities, which is a leader in ESG management, in distribution industry. CU was divided into all sectors of E, S, and G, and all sectors were actively engaged in activities and flexibly coping with changing environments and social needs. In particular, it was confirmed that CU's environmental management, which focuses the most, achieved successful results due to the increase in actual consumption of customers. ESG management activities at CU convenience stores are currently ongoing and future tasks. As a leading company in ESG management in the current industry, it is meaningful to understand the process of growing into a company that shares concerns, efforts, and practical activities and fulfills social responsibility. Through this study, the changes and growth of CU and domestic companies to ESG and sustainable management are expected in the futures.

• The Korean Society of Law and Medicine
• /
• v.18 no.1
• /
• pp.237-264
• /
• 2017

With the onset of the Human Genome Project, social concerns about 'genetic information discrimination' have been raised, but the problem has not yet been highlighted in Korea. However, non-medical institutions' genetic testing which is related to disease prevention could be partially allowed under the revised "Bioethics and Safety Act" from June 30, 2016. In the case of one domestic insurance company, DTC genetic testing was provided for the new customer of cancer insurance as a complimentary service, which made the social changes related to the recognition of the genetic testing. At a time when precision medicine is becoming a new standard for medical care, discipline on genetic information discrimination has become a problem that can not be delayed anymore. Article 46 and 67 of the Bioethics Act stipulate the prohibition of discrimination on grounds of genetic information and penalties for its violation. However, these broad principles alone can not solve the problems in specific genetic information utilization areas such as insurance and employment. The United States, Canada, the United Kingdom, and Germany have different regulations that prohibit genetic information based discrimination. In the United States, Genetic Information Non-Discrimination Act takes a form that adds to the existing law about the prohibition of genetic information discrimination. In addition, the range of genetic information includes the results of genetic tests of individuals and their families, including "family history". Canada has recently enacted legislation in 2017, expanding coverage to general transactions of goods or services in addition to insurance and employment. The United Kingdom deals only with 'predictive genetic testing results of individuals'. In the case of insurance, the UK government and Association of British Insurers (ABI) agree to abide by a policy framework ('Concordat') for cooperation that provides that insurers' use of genetic information is transparent, fair and subject to regular reviews; and remain committed to the voluntary Moratorium on insurers' use of predictive genetic test results until 1 November 2019, and a review of the Concordat in 2016. In the case of employment, The ICO's 'Employment Practices Code (2011)' is used as a guideline. In Germany, Human Genetic Examination Act(Gesetz ${\ddot{u}}ber$ genetische Untersuchungen bei Menschen) stipulates a principle ban on the demand for genetic testing and the submission of results in employment and insurance. The evaluation of the effectiveness of regulatory framework, as well as the form and scope of the discipline is different from country to country. In light of this, it would be desirable for the issue of genetic information discrimination in Korea to be addressed based on the review of related regulations, the participation of experts, and the cooperation of stakeholders.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.114-119
• /
• 2016

In this study, we tried to add the conductivity to natural polymer like bacterial cellulose (BC) coated with the conductive polymer PEDOT:PEG, graphene and silver nano-wire (AgNW). Sulfuric acid of 10 to 20% was previously mixed with PEDOT:PEG and then the solution was electron spin-coated on the BC membrane. And then, additive coating with graphene and AgNW were done to improve conductivity, which was examined by hall effect. As the result, we confirmed a considerable improvement of conductivity compared to BC-coated film without sulfuric acid treatment as $2.487{\times}10^{10}$ vs $8.093{\times}10^{15}$ ($1/cm^3$), showing higher electron density with $3.25{\times}10^5$ times. Also, we identified that changed particle type to the polymer type by sulfuric acid using SEM analysis. For FT-IR analysis, it was confirmed that S-O radical ($1200cm^{-1}$) increased in the sulfuric acid treatment than non-treated sulfuric acid. As the method used very small amount of PEDOT:PEG, its transparency could be kept, and pre-treatment process of sulfuric acid will be able to simplify the production process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.252-252
• /
• 2016

최근 학계나 산업계에서 indium tin oxide (ITO)의 높은 전기 전도도 및 광투과율을 이용하여 줄 발열을 기초로 하는 투명 면상 발열체에 대한 연구가 활발히 진행 되고 있다. 하지만 단일 ITO 박막으로 제작한 투명 면상 발열체는 온도가 상승함에 따라 균일하게 발열 되지 않으며, 글라스의 곡면 부분에서 유연성이 부족하여 크랙이 발생하는 다양한 문제점들을 가지고 있다. 이를 해결하기 위해 ITO의 결정화 온도 $160^{\circ}C$ 이상의 고온공정 또는 증착 후 열처리가 필요 하는 추가적인 공정이 필요하다. 따라서 본 연구에서는 단일 ITO 박막의 단점을 개선하는 ITO/Ag/ITO 하이브리드 구조의 투명 면상 발열체를 제작하여 전기적, 광학적 특성을 비교하고 발열량, 온도 균일성, 발열 유지 안정도를 조사하였다. 본 연구에서는 $50{\times}50mm$ 크기의 non-alkali glass (Corning E-2000) 기판 상에 마그네트론 스퍼터링 공정으로 상온에서 ITO/Ag/ITO 박막을 연속적으로 증착 하여 다층구조의 하이브리드 형 투명 면상 발열체를 제조하였다. 박막 증착 파워는 DC (Ag) power 100 W, RF (ITO) power 200 W로 하였으며 ITO박막두께는 40 nm로 고정 시키고 Ag박막 두께는 10 ~ 20 nm로 변화를 주었다. 증착원은 3인치 ITO 단일 타깃(SnO2, 10 wt.%)과 Ag 금속 타깃 (순도 99.99%)을 사용하였으며, 고순도 Ar을 이용하여 방전하였으며 총 주입량은 20 sccm, working pressure는 1.0 Pa을 유지하였다. 증착전 타깃 표면의 불순물 제거와 방전의 안정성을 유지하기 위해 10분간 pre-sputtering을 진행하고 증착하였다. 증착한 박막의 전기적, 광학적 특성은 각각 Hall-effect measurements system (ECOPIA, HMS3000), UV-Vis spectrophotometer (UV-1800, SHIMADZU)으로 측정하였으며, 하이브리드 표면의 구조 및 형상은 field emission-scanning electron microscopy (FE-SEM, Hitachi S-4800)으로 관찰하였다. 또한 투명 면상 발열체의 성능은 0.5 ~ 3 V/cm의 다양한 전압을 power supply (Keithly 2400, USA)를 통해서 시편 양 끝단에 인가한 후 시간에 따른 투명면상 발열체의 표면 온도변화를 infrared thermal imager (IR camera, Nikon)를 이용하여 관찰하였다. 하이브리드 구조를 가진 ITO박막의 두께는 40 nm로 고정 시키고 Ag박막의 두께는 10, 15, 20 nm로 변화를 주었다. 이들 박막의 면저항 값은 각각 5.3, 3.2, $2.1{\Omega}/{\Box}$였으며, 투과도는 각각 86.9, 81.7, 66.5 %였다. 이에 비해 두께 95 nm의 단일 ITO박막의 면저항 값은 $59.5{\Omega}/{\Box}$였으며, 투과도는 89.1 %였다. 하이브리드 구조의 전기적특성은 금속층의 두께가 증가할수록 캐리어 농도 값이 증가함에 따라 비저항 값이 감소되어 면저항 값도 감소된 것이며, 금속 삽입층의 전도특성이 비저항에 큰 영향을 주고 있음을 보여준다. 하지만 금속 층의 두께가 증가할수록 Ag층이 연속적인 막을 형성하여 반사율이 증가함에 따라 투과도가 감소하였다. 따라서 하이브리드 구조를 가진 투명 면상 발열체에 금속 삽입층의 두께 조절은 매우 중요한 인자임을 확인 할 수 있었다. 또한 발열성능을 평가 하기 위해 시편 양 끝단에 3 V전압을 인가한 결과, 금속 삽입층의 두께가 10 nm에서 5 nm씩 증가한 하이브리드 구조를 가진 투명면상 발열체의 최고 온도는 각각 98, 150, $167^{\circ}C$ 였으며, 단일 ITO의 최고 온도는 $32^{\circ}C$였다. 이 것은 동일한 두께 (95 nm)의 단일 ITO 박막과 비교하여 면저항이 낮은 하이브리드 박막의 발열량은 약 $120^{\circ}C$로 발열효율이 매우 우수한 것을 확인 할 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.5
• /
• pp.418-428
• /
• 2003

Fiber fracture is one of the dominant failure phenomena affecting the total mechanical Performance of the composites. Fiber fracture locations were measured through the conventional optical microscope and the nondestructive acoustic emission (AE) technique and then were compared together as a function of the epoxy matrix modulus and the fiber surface treatment by the electrodeposition method (ED). Interfacial shear strength (IFSS) was measured using tensile fragmentation test in combination of AE method. ED treatment of the fiber surface enlarged the number of fiber fracture locations in comparison to the untreated case. The number of fiber fracture events measured by the AE method was less than optically obtained one. However, fiber fracture locations determined by AE detection corresponded with those by optical observation with small errors. The source location of fiber breaks by AE analysis could be a nondestructive, valuable method to measure interfacial shear strength (IFSS) of matrix in non-, semi- and/or transparent polymer composites.