• 한국자동차공학회논문집
• /
• 제23권3호
• /
• pp.292-298
• /
• 2015

A wiper is a safety device removing rain and debris from windshield and ensuring visibility of drivers. If contact pressure distribution between rubber of the blade and the windshield is unbalanced, unwanted noise, vibration, and abrasion of the blade can occur and sometimes fatal accidents could occur. To improve the safety of the wiper, there have been many researches on the contact pressure analysis of the wiper, but the analysis results were not converged or require much computational time due to material nonlinearity of the rubber and contact conditions between the blade rubber and the windshield. In this research, a simple model with 1D beam and 2D shell elements was used for the contact pressure analysis instead of the 3D blade model. The simplified model saved computational time of the analysis and resolved convergence problems. The accuracy of the analysis results was verified by comparing them with experimental results for different rail spring curvatures.

• 수산해양기술연구
• /
• 제54권4호
• /
• pp.324-332
• /
• 2018

We conducted a questionnaire survey to analyze the current status of the coastal composite fisheries, as well as the improvement point in designing a new type coastal composite fishing boat suitable for Korean fishing environments from April to August 2017. The questionnaire composed of 20 questions about the features of the coastal composite fishing boat and fishing work. The survey sites were selected to cover all parts of the country by considering the geographical position. The significance testing for the response results was accessed by ${\chi}^2$ test and ANOVA. The results revealed that more than half (59.1%) of the fishermen operated one day per voyage and operating alone topped with 22.5% in the number of crews, followed by 2 persons (20.3%) and 5 persons (22.1%). The navigation devices had a high rate of installation and GPS plotter ranked first in the devices. In addition, fish finder ranked first in fishing equipment, followed by net hauler. The most inconvenient work that they felt during the fishing operation was fish handing at 49.8% and other general fishing works like setting and hauling line, deck cleaning accounted for about 25%. The hardest work was the accident by ropes wrapped around propeller and the engine trouble came in second. The most inconvenient facilities to the present design of fishing boat was wheelhouse (76.7%), followed by fish hold (38.5%), and deck (35.1%). Furthermore, inconvenient points related to the movement of fishing gear, noise and vibration of engine, slippery deck and small fish hold exceeded 50%.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.391-405
• /
• 2019

Compared to the ambient vibration test mainly identifying the structural modal parameters, such as frequency, damping and mode shapes, the impact testing, which benefits from measuring both impacting forces and structural responses, has the merit to identify not only the structural modal parameters but also more detailed structural parameters, in particular flexibility. However, in traditional impact tests, an impacting hammer or artificial excitation device is employed, which restricts the efficiency of tests on various bridge structures. To resolve this problem, we propose a new method whereby a moving vehicle is taken as a continuous exciter and develop a corresponding flexibility identification theory, in which the continuous wheel forces induced by the moving vehicle is considered as structural input and the acceleration response of the bridge as the output, thus a structural flexibility matrix can be identified and then structural deflections of the bridge under arbitrary static loads can be predicted. The proposed method is more convenient, time-saving and cost-effective compared with traditional impact tests. However, because the proposed test produces a spatially continuous force while classical impact forces are spatially discrete, a new flexibility identification theory is required, and a novel structural identification method involving with equivalent load distribution, the enhanced Frequency Response Function (eFRFs) construction and modal scaling factor identification is proposed to make use of the continuous excitation force to identify the basic modal parameters as well as the structural flexibility. Laboratory and numerical examples are given, which validate the effectiveness of the proposed method. Furthermore, parametric analysis including road roughness, vehicle speed, vehicle weight, vehicle's stiffness and damping are conducted and the results obtained demonstrate that the developed method has strong robustness except that the relative error increases with the increase of measurement noise.

• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.271-278
• /
• 2010

반강성 포장은 공극률이 큰 개립도 아스팔트 혼합물의 공극에 시멘트 페이스트를 침투시켜 아스팔트 포장의 연성과 콘크리트 포장의 강성을 동시에 이용하는 포장형식이다. 반강성 포장은 콘크리트 포장에 비해 평탄성이 좋고 주행에 의한 진동이나 소음을 저감할 수 있으며, 아스팔트 포장에 비해 소성변형이 적고 온도저감 효과가 있는 것으로 알려져 있다. 본 연구에서는 반강성 덧씌우기 포장을 시험시공하여 반강성 포장의 온도저감 효과를 조사하였고 시편을 제작하여 옥외에서 온도 및 중량을 측정하여 반강성 포장의 온도저감 및 보수 효과를 확인하였다. 상용 3차원 유한요소해석 프로그램인 Abaqus 6.8로 반강성 포장과 아스팔트 포장을 구조해석하여 하중재하 위치에서의 수평 및 연직방향 응력과 변형률을 비교하고 다층탄성해석 프로그램 Bisar 3.0으로 검증하였다. 구조해석 결과를 바탕으로 피로균열을 예측하여 반강성 포장과 아스팔트 포장의 공용성을 비교하였다.

• 해양환경안전학회지
• /
• 제30권3호
• /
• pp.283-290
• /
• 2024

In this study, a survey on the coexistence of offshore wind farm and fishing activities in Gochang, Gunsan, and Buan's fishermen in the southwest sea of shore wind farm was carried out witn an aim of examining the factors that should be considered when coexisting. A questionnaire was composed after referring to domestic and foreign literature data on examples of coexistence. The questionnaire was issued through direct visits. Frequency analysis and cross-analysis were used for survey response results, and IBM SPSS Statistics ver. 26 was used for statistical processing. As a result of analyzing a total of 84 questionnaires, the perception of the coexistence of offshore wind and fishing activities was the same by 50.0% positive and negative, respectively. As a result of cross-analysis by region, significant differences were found (p <0.039). Gochang fishermen showed a high negative perception of the coexistence of offshore wind and fishing activities at 62.1%, with the main reason being that fishing resources are expected to decrease due to the influence of noise, vibration, and current generated from offshore wind farm facilities. In Gunsan, negative perception of coexistence was high at 57.7%. This was mainly attributed to the impossibility to operate in the offshore wind farm due to the nature of the fishery. On the contrary, in the case of Buan, 69.0% of the positive perception of coexistence was high 'because fishermen were dissatisfied with the current coexistence plan (policy)'. According to previous studies, 91.8% of domestic fishing methods show the possibility of fishing activities in offshore wind under caution, so it is concluded that research should be conducted to coexist with offshore wind and fishing activities as in foreign countries for smooth installation of offshore wind and continuous fishing activities.

• 한국터널지하공간학회 논문집
• /
• 제26권5호
• /
• pp.463-476
• /
• 2024

쉴드 TBM 공법은 소음·진동 등의 환경위해요소를 배재할 수 있어 친환경적이며 연약한 지반조건에서도 안전한 터널건설이 가능하지만 기존 NATM 공법에 비해 고가의 공사비로 인해 적용에 많은 제약이 있다. 따라서 쉴드 TBM 공법의 적용성을 높이기 위해서는 공사비 절감을 통한 경제성 확보가 필요하며 이중 쉴드 TBM 터널 공사비의 약 35~40%로 가장 큰 비중을 차지하고 있는 세그먼트 공사비 절감이 매우 중요하다. 그 일환으로 본 논문에서는 쉴드 TBM 시공경험이 풍부한 일본의 쉴드 TBM 장기계측 데이터 분석을 통하여 터널 시공 및 운용 중 세그먼트 응력, 터널외부하중 조건 등의 변화추이를 고찰하고 설계단계의 예상치와 운용 중 계측값의 차이를 비교분석하였다. 이를 통하여 쉴드 TBM 설계단계에서 세그먼트 경제성 확보를 위한 개선사항을 연구하고자 한다.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.130-137
• /
• 2003

고조파에 의한 전력품질저하로 인해 전기설비의 성능저하, 소음, 진동 등의 장해현상이 발생한다. 또한 앞으로 에너지 이용 효율을 높이기 위한 대책으로 반도체 회로를 사용하는 에너지 절약장치가 널리 보급되고, 전동기 속도 제어장치, 에너지 저장장치 등 에너지 변환장치의 사용이 증가될 전망이어서 고조파의 발생은 필연적이며 그 문제점은 심각하게 대두될 것이다. 이러한 고조파에 의한 장애를 해결하기 위해서는 전압, 전류, 전력, 역률, 고조파 차수별 성분 및 고조파 총합 왜형률 등의 정확한 전력품질을 측정하고 분석할 필요가 있다. 본 연구에서는 이러한 고조파 관련 전력품질을 측정하고 분석할 수 있는 저가형 측정시스템을 개발하였으며 3상 4선식 계통에서 전력품질을 측정하고 분석함으로써 그 성능을 입증하였다.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.15-21
• /
• 2019

The worm reducer is capable of quadrature power transmission when the shafts are disposed at right angles to each other. Since a large reduction ratio can be obtained of up to approximately 1/100 and a sliding movement is performed during operation compared with other gears, the noise and vibration are small, and there is the advantage that reverse rotation can be prevented. On the other hand, severe wear and damage are displayed on the gear and worm tooth surface, and many defects, such as intense heat generation of the reducer, occur. In the reducer case, the four-piece casing method was selected to solve the problems of heat generation, transmission efficiency, and assemblability. In this paper, we analyzed the problems of the worm and worm wheel (the core parts of a 5-Ton worm reducer) and casing through these methods and researched how to solve them.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.37-43
• /
• 2006

Fitting process carried out in automobile transmission assembly line is classified into three classes; heat fitting, press fitting, and their combined fitting. Heat fitting is a method that heats gear to a suitable range under the tempering temperature and squeezes it toward the outer diameter of shaft. Its stress depends on the yield strength of gear. Press fitting is a method that generally squeezes gear toward that of shaft at room temperature by press. Another method heats warmly gear and safely squeezes it toward that of shaft. Warm shrink fitting process for automobile transmission part is now gradually increased, but the parts (shaft/gear) assembled by this process produced dimensional change in both outer diameter and profile of the gear. So that it may cause noise and vibration between gears. In order to solve these problems, we need an analysis of warm shrink fitting process, in which design parameters are involved; contact pressure according to fitting interference between outer diameter of shaft and inner diameter of gear, fitting temperature, and profile tolerance of gear. In this study, an closed form equation to predict contact pressure and fitting load was proposed in order to develop optimization technique of warm shrink fitting process and verified its reliability through the experimental results measured in the field and FEM, that is, thermal-structural coupled field analysis. Actual loads measured in the field have a good agreement with the results obtained by theoretical and finite element analysis and also the expanded amounts of the outer diameters of the gears have a good agreement with results.

• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.1057-1077
• /
• 2010

An early detection of structural damages is critical for the decision making of repair and replacement maintenance in order to guarantee a specified structural reliability. Consequently, the structural damage detection, based on vibration data measured from the structural health monitoring (SHM) system, has received considerable attention recently. The traditional time-domain analysis techniques, such as the least square estimation (LSE) method and the extended Kalman filter (EKF) approach, require that all the external excitations (inputs) be available, which may not be the case for some SHM systems. Recently, these two approaches have been extended to cover the general case where some of the external excitations (inputs) are not measured, referred to as the adaptive LSE with unknown inputs (ALSE-UI) and the adaptive EKF with unknown inputs (AEKF-UI). Also, new analysis methods, referred to as the adaptive sequential non-linear least-square estimation with unknown inputs and unknown outputs (ASNLSE-UI-UO) and the adaptive quadratic sum-squares error with unknown inputs (AQSSE-UI), have been proposed for the damage tracking of structures when some of the acceleration responses are not measured and the external excitations are not available. In this paper, these newly proposed analysis methods will be compared in terms of accuracy, convergence and efficiency, for damage identification of structures based on experimental data obtained through a series of laboratory tests using a scaled 3-story building model with white noise excitations. The capability of the ALSE-UI, AEKF-UI, ASNLSE-UI-UO and AQSSE-UI approaches in tracking the structural damages will be demonstrated and compared.