• 대한의용생체공학회:의공학회지
• /
• 제26권4호
• /
• pp.199-205
• /
• 2005

When recording single-unit responses from neural systems, a common problem is the accurate detection of spikes (action potentials) in the presence of competing unwanted (noise) signals. While some sources of noise can be readily dealt with through filtering or 'template subtraction' techniques, other sources present a more difficult problem. In particular, noise components introduced by power supplies, which contain harmonics of the power-line frequency, can be particularly troublesome in that they can mimic the shape of the desired spikes. Thus, standard 'template subtraction' techniques or notch-filtering approaches are not appropriate. In this study, we propose the use of a novel template-subtraction scheme that involves estimating the power-line noise waveform and using cross-correlation techniques to subtract them from the recordings. This technique requires two key steps: (1) cross-correlation analysis of each recorded waveform extracts a robust representation of the power-line noise waveform and (2) a second level of cross-correlation to successfully subtract that representation from each recorded waveform. This paper describes this algorithm and provides examples of its implementation using actual recorded waveforms that are contaminated with these noise signals. An improvement (reduction) in the noise level is reported, as are suggestions for future implementation of this strategy.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.101-104
• /
• 2003

In this paper, speech quality is improved by removing abrupt noise intervals and then substituting the gaps with estimates of the previous speech waveform. An abrupt noise detection signal has been proposed as a prediction error signal by utilizing LP coefficients of the previous frame. Abrupt noise intervals are estimated by using spectral energy. After removing estimated noise intervals, we applied several waveform substitution techniques such as zero substitution, previous frame repetition, pattern matching, and pitch waveform replication. To prove the validity of our algorithm, the LPC spectral distortion test and the recognition test are executed and, the results show that the speech quality is fairly well improved.

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.681-691
• /
• 2010

LiDAR waveform decomposition plays an important role in LiDAR data processing since the resulting decomposed components are assumed to represent reflection surfaces within waveform footprints and the decomposition results ultimately affect the interpretation of LiDAR waveform data. Decomposing the waveform into a mixture of Gaussians involves two related problems; 1) determining the number of Gaussian components in the waveform, and 2) estimating the parameters of each Gaussian component of the mixture. Previous studies estimated the number of components in the mixture before the parameter optimization step, and it tended to suggest a larger number of components than is required due to the inherent noise embedded in the waveform data. In order to tackle these issues, a new LiDAR waveform decomposition algorithm based on the sequential approach has been proposed in this study and applied to the ICESat waveform data. Experimental results indicated that the proposed algorithm utilized a smaller number of components to decompose waveforms, while resulting IMP value is higher than the GLA14 products.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.333-341
• /
• 2007

Waveform design method for inkjet printing has been proposed tv pressure wave measurement. The pressure wane inside the inkjet dispenser can be effectively measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially availablelaser vibrometer. In order to obtain high speed inkjet droplets, two pulse waveform was designed such that the pressure wane after droplet formation can be minimized.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• ETRI Journal
• /
• 제31권6호
• /
• pp.755-764
• /
• 2009

This paper presents a switched self-biasing and a tail current-shaping technique to suppress the 1/f noise from a tail current source in differential cross-coupled inductance-capacitance (LC) voltage-controlled oscillators (VCOs). The proposed LC VCO has an amplitude control characteristic due to the creation of negative feedback for the oscillation waveform amplitude. It is fabricated using a 0.13 ${\mu}m$ CMOS process. The measured phase noise is -117 dBc/Hz at a 1 MHz offset from a 4.85 GHz carrier frequency, while it draws 6.5 mA from a 0.6 V supply voltage. For frequency tuning, process variation, and temperature change, the amplitude change rate of the oscillation waveform in the proposed VCO is 2.1 to 3.2 times smaller than that of an existing VCO with a fixed bias. The measured amplitude change rate of the oscillation waveform for frequency tuning from 4.55 GHz to 5.04 GHz is 131 pV/Hz.

• 천문학회보
• /
• 제44권1호
• /
• pp.46.2-46.2
• /
• 2019

We propose a deep learning model that can generate a waveform of coalescing binary black holes in merging and ring-down phases in less than one second with a graphics processing unit (GPU) as an approximant of gravitational waveforms. Up to date, numerical relativity has been accepted as the most adequate tool for the accurate prediction of merger phase of waveform, but it is known that it typically requires huge amount of computational costs. We present our method can generate the waveform with ~98% matching to that of the status-of-the-art waveform approximant, effective-one-body model calibrated to numerical relativity simulation and the time for the generation of ~1500 waveforms takes O(1) seconds. The validity of our model is also tested through the recovery of signal-to-noise ratio and the recovery of waveform parameters by injecting the generated waveforms into a public open noise data produced by LIGO. Our model is readily extendable to incorporate additional physics such as higher harmonics modes of the ring-down phase and eccentric encounters, since it only requires sufficient number of training data from numerical relativity simulations.

• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.999-1011
• /
• 2015

전자전(Electronic Warfare) 상황에서 레이다는 재머에 의해 전파교란공격(ECM: Electronic Counter Measures)을 받게 된다. Linear-FM 신호는 도플러 특성이 우수하고, 신호의 구현이 용이하여 레이다에서 주로 사용되어 왔지만, 반복된 패턴에 의해 피탐 확률이 높고, 신호 특성변수 추정이 가능하여 기만재밍에 취약하다. 최근 제안된 APCN(Advanced Pulse Compression Noise) 신호는 랜덤 진폭과 랜덤 위상코드로 이루어진 신호로서, 저피탐 성능이 우수한 신호이다. 하지만, APCN 신호를 비롯한 일반적인 위상코드 신호는 도플러 특성이 좋지 않으므로, 주파수 천이에 의해 신호수신 성능이 저하될 수 있다. 따라서 본 논문에서는 도플러 특성을 개선하기 위한 방안으로 랜덤 위상천이 및 부호율 천이(RPCR: Random Phase and Code Rate transition) 레이다 신호 파형을 제안하고, 도플러 성능과 저피탐 성능을 분석하였다. Ambiguity 함수를 이용하여 부호율 천이에 의한 도플러 특성 개선을 제시하며, WHT(Wigner-Hough Transform)을 이용한 신호 특성 변수 추정 실험을 통해 RPCR 신호의 저피탐 성능을 분석하고, 전파교란대응책(ECCM: Electronic Counter Counter Measures)으로의 가능성을 확인한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권1호
• /
• pp.29-36
• /
• 2009

Power supply noise is fundamentally caused by large current peaks. Since large current peaks are induced by simultaneous switching of many circuit elements, power supply noise can be minimized by deliberate clock scheduling which utilizes nonzero clock skew. In this paper, nonzero skew clock scheduling is used to avoid the large peak current and consequently reduce power supply noise. While previous approaches require extra characterization efforts to acquire current waveform of a circuit, we approximate it only with existing cell library information to be easily adapted to conventional design flow. A simulated annealing based algorithm is performed, and the peak current values are estimated for feasible clock schedules found by the algorithm. The clock schedule with the minimum peak current is selected for a solution. Experimental results on ISCAS89 benchmark circuits show that the proposed method can effectively reduce the peak current.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.95-100
• /
• 2011

The test was done on cars travelling at speeds of 20km/h, 60km/h and 100km/h, the performance testing mode for chassis dynamometer. In this test, the secondary waveform were measured, including those using faulty MAP sensors, oxygen sensors and spark plugs. The results from these measurements and their analysis of secondary waveform can be summarized as follows: 1) The secondary waveform measured from the faulty oxygen sensor showed a lot of noise around peak voltage and in the rising and falling sections during spark line which means that the air fuel mixture was non-homogeneous. 2) The secondary waveform from the faulty MAP sensor showed the worst shape compared to other sensors, including variation of spark line, state of air-fuel mixture and velocity of flame front. 3) The spark line time of secondary waveform using a faulty spark plug displayed the shortest and smallest energy spark line, which means that a misfire occurred.