• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.34-40
• /
• 2001

Ultra Wide Band (UWB) system uses wide band signal, which power spectral density is over all band, It likes as a noise floor, so UWB system can be used without interfering with other communication system. For the first time, we adopted Rayleigh mono pulse antipodal signal which had symmetric characteristic and zero mean. With the power spectral density using stochastic process, we knew that the antipodal signaling scheme removed discrete spectrum and concluded that this had much better spectral suppression, probability of error and data rate than PPM (Pulse Positioning Modulation).

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.243-250
• /
• 2017

GPS(Global Positioning System) signal structure uses spread spectrum and the received power is relatively lower than the receiver noise figure. Therefore, it is vulnerable to the RF interferences and it could restrict on the safety navigation. The objective of this paper is to research on the spectral domain GPS interference rejection algorithm using proposed K-median filtering threshold setting method. In the performance test, the proposed algorithm has a relatively higher ISR(interference to signal ratio) compared with the conventional temporal domain technique in case of time variant interference signals.

• Journal of Power System Engineering
• /
• v.11 no.4
• /
• pp.38-43
• /
• 2007

Pulsation is an inherent phenomenon in reciprocating compressors. It interacts with piping to cause vibrations and performance problems. Indiscriminately connecting to a compressor can be dangerous and cost money in the form of broken equipment and piping, poor performance, inaccurate metering, unwanted vibration, and sometimes noise. Piping connected to a compressor can materially affect the performance and response. To minimize these detrimental effects, reciprocating compressor system should be equipped by pulsation suppression system. The system usually comprises bottle volume, called snubber. Snubber is one of the most important parts in hydrogen compressing system. It has installed reciprocating hydrogen compressor. One of these components is snubber which has function to reduce pulsation waveform and to remove the impurities in the hydrogen gas. A snubber has an inclined plate as a buffer, which is installed inside snubber. When the pressure loss and the pulsation of pressure within a snubber is minimized, the snubber could get more applicability. Therefore, a study to find an optimum geometric size on a several snubbers which have different buffer width, has been conducted using a numerical analysis.

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1247-1258
• /
• 1999

This paper presents vibration control of a CD-ROM(compact disc-read only memory) drive feeding system consisting of a new type of CD-ROM mount using an electro-rheologocal(ER) fluid. Chemically treated starch particles and silicon oil are used for EF fluid, and its field-dependent yield stresses are experimentally distilled under both the shear and the flow modes. On the basis of the yield stress, an appropriate size of ER CD-ROM mount adapted to conventional feeding system is designed and manufactured. Vibration isolation performance of the proposed mount is evaluated in the frequency domain and compared with that of conventional rubber mount. The ER CD-ROM mount is then installed to the drive feeding system and the system equation of motion is derived. The skyhook controller is then incorporated with the fuzzy technique to improve the performance of ER CD-ROM mount. A set of fuzzy parameters and control rules are obtained from a relation between vertical displacement and pitching motion of the feedng system. Followingthe formulation of the fuzzy-skyhook controller, computer simulation is undertaken in order to evaluate vibration suppression of the CD-ROM drive feeding system subjected to various excitations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10A
• /
• pp.1159-1166
• /
• 2004

This paper follows up the previous work on the linearly constrained, modified minimum mean-squared error(MMSE) detection for direct-sequence code-division multiple-access DS-CDMA) systems in fading channels. We find a condition to avoid the breakdown of joint modified MMSE detection and pilot symbol-aided channel estimation (PSACE). The linearly constrained, modified MMSE solution is theoretically shown to be robust against time variations in Rayleigh fading channels. This fact is consistent with the simulation results. We also show that under some conditions the linearly constrained, modified MMSE detection maximizes the output signal-to-interference-plus-noise ratio.(SINR)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.168-175
• /
• 1987

In this paper, a FFH-SS hybrid communication method using digital frequency synthesizer is proposed. This can simultaneously share the same frequency band with conventional band limited communication method without interference. In the experiment the selective hopping pattern is attained by some conbination of serial to parallel conversion of maximal code from pseudo random noise generater, and it is observed that the selective hopping band transition can be more easily achieved when the hop interval is nonuniform than it is uniform. Digital frequency synthesizer is now reported to have very poor spurious suppression ability below 50~60dB, the reason of this is observed from the experimental result, and the way of how to solve this problem is presneted.

• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2012

In this paper, a push-push VCDRO (Voltage Controlled Dielectric Resonator Oscillator) with a modified frequency tuning structure is investigated. The push-push VCDRO designed at 16GHz is manufactured using a LTCC (Low Temperature Co-fired Ceramic) technology to reduce the circuit size. The frequency tuning structure is embedded in intermediate layer of A6 substrate by an advantage of LTCC process. Experimental results show that the fundamental frequency suppression is above 30dBc, the frequency tuning range is 0.43MHz over control voltage of 0 to 12V, and phase noise of push-push VCDRO presents a good performance of -103dBc/Hz at 100KHz offset frequency from carrier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1635-1640
• /
• 2000

In this paper, a 18 GHz oscillator is designed with the push-push method an fabricated by semi-MMIC process, in which the second harmonic is the main output signal with the suppressed fundamental mode. In semi-MMIC process, passive components with microstrip transmission line are implemented using MMIC process on semi-insulating GaAs substrate. Then, chip types of P-HEMT, resistors, and capacitors are connected through Au wire-bonding. Also, the ground plane is inserted around the circuit and connected each other with the back-side of substrate through Au wire-bonding instead of via-hole. The semi-MMIC push-push oscillator shows the output powder of -10.5 dBm, the fundamental frequency suppression of -17.3 dBc/Hz, and the phase noise of -97.9 dBc/Hz at the offset frequency of 100 kHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.345-350
• /
• 2005

An X-band push-push VCO for low cost applications is proposed. The designed push-push oscillator achieves a wide tuning range in the X-band by the collector bias tuning instead of extra varactor diodes. The measurement shows a wide tuning bandwidth of $900\;\cal{MHz}\;from\;10.9\;\cal{GHz}\;to\;11.8\;\cal{GHz}$ with a drain bias voltage varying from 4 to 9 V, excellent fudamental suppression of $-30\;\cal{dBc}$ and good phase noise of $-115\;\cal{dBc/Hz}\;@\;1\;\cal{MHz}$ offset.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.15-21
• /
• 2005

One of the core technology in WDM-PON system is a generation and modulation technique of the optical source in Optical Network Unit (ONU). In this paper, we propose a reflective semiconductor optical amplifier (RSOA) as a modulator in WDM-PON system. Its performance is analyzed by simulation and actual experimentation. Using RSOA in WDM-PON system as a modulator, it obtains higher gain compared to the conventional SOA due to the double pass gain effect. Furthermore RSOA can provide high gain with comparatively low input power. This is very helpful when we set up the actually system because using lower input power, it can reduce the load of the driving circuit which makes very economical module structure. Therefore, when RSOA is used as a modulator, not only it gives noise suppression effect, but also provides certain amount of gain as well. In addition, comparing with conventional SOA which gives fairly large insertion loss, RSOA can provides more important merits.