• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.94-102
• /
• 2018

In this paper, the wideband mono-pulse radar using AGC and limiter is designed. The output response characteristics of the mono-pulse radar using AGC and limiter are analyzed, respectively. In addition, the output response for jamming input signals is analyzed. The range tracking loop in the mono-pulse radar has robust output response to the noise jamming input signal. Although the output settling response of the AGC-based mono-pulse radar is larger than that of the limiter-based mono-pulse radar, the AGC-based mono-pulse radar has robustness to the noise jamming input signal due to feedback loop.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.890-894
• /
• 2014

In this paper, we derive the CRLB (Cramer-Rao Lower Bound) of effective carrier-to-noise power ratio ($C/N_0$) estimation for a GPS (Global Positioning System) L1 C/A (Coarse/Acquisition) signal under band-limited white noise jamming environments. The quality of a received GPS signal is commonly described in terms of its $C/N_0$, implying that the noise is white and thus can be described by scalar noise density. However, if some intentional interference is received to a victim GPS receiver, then the $C/N_0$ is no longer the efficacious performance indicator. The correct and straightforward measurement to analyze the receiving situation is the effective $C/N_0$. In this paper, we consider a band-limited white noise jamming whose bandwidth is 2MHz and is the same as one of the first null-to-null bandwidth of the GPS L1 C/A signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.499-504
• /
• 2002

In this paper, we analyzed the performance of FH/CPFSK system with differential detection in thermal noise, partial-band jamming noise and adjacent interference of all eight bit pattern. The parameters to analize performances of FH/CPFSK system have been used the bit rate, modulation index and performances of FH/CPFSK system with the differential detector have been presented with the optimum correlation function. And, we were compared with performance of FH/CPFSK and FH/BFSK system. In result, we could know that bit error probability of the approximation equation and exact equation nearly accorded in the high signal-to-noise ratio. And, we have been proved that FH/CPFSK system with differential detection according to jamming fraction ${\gamma}$ was worst to 3dB than FH/CPFSK system with limiter-discriminator. but was superior to 2dB than FH/BFSK.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.115-123
• /
• 2018

In this paper, we consider the applicability of time-hopping(TH) systems for anti-jamming(AJ) communication. We first briefly summarize fundamentals of TH systems and several common jamming scenarios that have been considered in the literature. We then analyze the AJ performance of TH systems under those common jamming environments. From our simulation results, we reveal that among narrow band, partial band, broadband, and sweep jamming, partial band and sweep jamming are the best ones from jammer perspective. For the partial band jamming case, we show that the most effective bandwidth ratio and location are 50 % and 2.5-3.5 Ghz, respectively. For the sweep jamming case, we illustrate that the AJ performance of the TH system is enhanced when the sweep duration approaches to the bit duration. In addition, we pointed out that the most efficient jamming bandwidth ratio is 1/2. Finally, our results show that the TH-BPSK system greatly outperforms the TH-PPM counterpart.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.721-728
• /
• 1994

In this paper, we analyzed the performances of system considering diversity for FH/CPFSK system with limiter-discrimicator detection and integrate-and-dump post-detection filtering. And, we considered thermal noise and partial-band jamming noise, intersymbol interference for all eight of the possible adjacent bit data patterns, FM noise clicks for evaluation systems. In result, the performance of FH/CPFSK system with diversity under the worst-case partial band jamming noise degraded about 5dB rather than that of without diversity when we considered the thermal noise but improved about 16dB rather than of without diversity when we ignored the thermal noise.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.153-160
• /
• 1997

This paper has analyzed the performance against a single tone jamming for the CPM DS-SS system with a Binary FSK Modulation. The CPM DS-SS system designed with the different phase shift of the same pseude-noise code has the advantage of reducing the jamming and interference effects on multi-users communication environment. Analytical results show that the system preformance improves by increasing parrallel users in the presence of the coherent single-tone, which is the worst interference since the jamming signal has the same frequency as a carrier.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.5
• /
• pp.424-433
• /
• 1991

In the noncoherent FH/FSK system presence of the multitione jamming and noise, in the case random and 송 structures jamming model, the performance analyzed that random and struetured jamming derived error proability. It is found that error probability and performance when error corecting code used Hamming. BCH, Convolutional code under the worst case partial band jamming interference.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.645-655
• /
• 1990

A hybrid DS/SFH spread spectrum system is used to achieve a larger gain in some applications. The probability of error for a hybrid DS/SFH(direct sequence/slow frequency hopped) spread-spectrum system is calculated over a channel which suffers from multiple-tone jamming and additive white Gaussian noise. BPSK(binary phase shift keying) is considered as modulation scheme. The probability of error is computed for various system parameters such as a DS/SFH hybrid ratio, the number of jamming tones, a jamming-to-signal ratio, and a siganl-to-noise ratio. It is shown that a DS system or a SFH system achieves smaller probability of error than a hybrid DS/SFH system for most values of system parameters. However, it is also shown that there are hybrid ratios with which a hybrid DS/SFH system achieves smaller probability of error than a DS system and a SFH system achieve for some values of system parameters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.10
• /
• pp.1-9
• /
• 1990

The performance of noncoherent FH/FSK system in the presence of multitone jamming and noise is analyged. Random and the structured jammings are considered as a multitone jamming model. The probability density function is derived and then optimum decision rule is applied to determine error probability of each cases. As a result, error probabilities of random and structured multitone jamming are shown as a function of number of jamming tones, jamming to signal power ratio, jamming signal phase and one jamming tone power to signal power ratio under Worst-case Jamming interference. It is found that error probability is maximam when one jamming tone power to signal power ratio is 1. Also we know that error performance of random and structured jamming is almost equal.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.910-916
• /
• 2010

A modern artillery use a FMCW Proximity Fuze for effectively target destruction. FMCW Proximity Fuze can be deceived by Jamming Technique because it uses RF for distance estimation. FMCW Proximity Fuze algorithm is similar to FMCW radar's, but normal Jamming Tech. like Noise and Mulitone is useless. Most Shots with FMCW Proximity Fuze have a additional mechanical fuze against RF Jamming. Shots explode by mechanical fuze when Proximity Fuse is Jammed. However, distance Deception is available because shots can not distinguish between deception jamming signal and ground reflected signal. For making Distance Deception Jamming, FMCW signal tracking is demanded. In this paper, we propose a FMCW tracking method and develop the Jammer to show Jamming signal.