• 천문학회보
• /
• 제37권1호
• /
• pp.51.1-51.1
• /
• 2012

We observed low-z quasar PG1426+015 (z=0.086), using the near-IR high resolution echelle spectrometer, IRCS, at the SUBARU 8.2 m telescope. Using an Adoptive Optics system, the full width at half maximum of the point spread function was about 0.3 arcsec, which can effectively separate the quasar spectra from the host galaxy spectra. We also maximize the total exposure time up to several hours per target, and develop data reduction methods to increase the signal-to-noise ratios. This poster presents the data reduction processes and sample spectra from the quasar and its host galaxy. These spectral lines will be used to study the physical mechanism of quasars, and the velocity dispersions of the stars in the bugle of the host galaxy.

• 대한의용생체공학회:의공학회지
• /
• 제36권4호
• /
• pp.123-127
• /
• 2015

Recently, new gamma camera systems enabling low radiation dose imaging have been developed. We reviewed the recent development of these low dose gamma camera systems including high sensitivity detectors, device structures, noise reduction filters, efficient image reconstruction algorithms, low dose protocols, and so on. It is expected that further technological advances reduce both radiation dose and imaging time in gamma camera imaging especially for radiation-sensitive patients such as pediatric patients.

• Asian Journal of Atmospheric Environment
• /
• 제7권2호
• /
• pp.72-84
• /
• 2013

In the study, pollution levels of indoor polycyclic aromatic hydrocarbons (PAHs) in public facilities (vapor phase or particulate phase) were evaluated, and a health risk assessment (HRA) was carried out based on exposure scenarios. Public facilities in Korea covered by the law, including underground subway stations, funeral halls, child care facilities, internet cafes (PC-rooms), and exhibition facilities (6 locations for each type of facility, for a total of 48 locations), were investigated for indoor assessment. For the HRA, individual excess cancer risk (ECR) was estimated by applying main toxic equivalency factor (TEF) values suggested in previous studies. Among the eight public facilities, internet cafes showed the highest average $PM_{2.5}$ concentration at $110.0{\mu}g/m^3$ (range: $83.5-138.5{\mu}g/m^3$). When assuming a risk of facility exposure time based upon the results of the surveys for each public facility, the excess cancer risk using the benzo(a)pyrene indicator assessment method was estimated to be $10^{-7}-10^{-6}$ levels for each facility. Based on the risk associated with various TEF values, the excess cancer risk based upon the seven types cancer EPA (1993) and Malcolm & Dobson's (1994) assessment method was estimated to be $10^{-7}-10^{-5}$ for each facility. The excess cancer risk estimated from the TEF EPA (2010) assessment was the highest: $10^{-7}-10^{-4}$ for each facility. This is due to the 10-fold difference between the TEF of dibenzo(a,e)fluoranthene in 2010 and in 1994. The internet cafes where smoking was the clear pollutant showed the highest risk level of $10^{-4}$, which exceeded the World Health Organization's recommended risk of $1{\times}10^{-6}$. All facilities, with the exception of internet cafes, showed a $10^{-6}$ risk level. However, when the TEFs values of the US EPA (2010) were applied, the risk of most facilities in this study exceeded $1{\times}10^{-6}$.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.301-311
• /
• 2015

Objectives: Operators of overhead traveling crane in a ship assembly factory perform work to transmit large vessel blocks to an appropriate working process. Hazardous matters such as metal dusts, carbon monoxide, carbon dioxide, ozone, loud noise and fine particles are generated by variable working activities in the factory. The operators could be exposed to the hazardous matters during the work. In particular, welding fumes comprised of ultra fine particles and heavy metals is extremely hazardous for humans when exposing a pulmonary through respiratory pathway. Occupational lung diseases related to welding fumes are increasingly on an upward tendency. Therefore, the objective of this study is to assess properly unknown occupational exposure to the welding fumes among the operators. Methods: This study intended to clearly determine an equivalence check whether or not chemical constituents and composition of the dusts, which existed in the driver's cab, matched up with generally known welding fumes. Furthermore, computational fluid dynamics program(CFD) was used to identify a ventilation assessment in respect of a contamination distribution of welding fumes in the air. The operators were investigated to assess personal exposure levels of welding fumes and respirable particulate. Results: The dust in an operation room were the same constituents and composition as welding fumes. Welding fumes, which caused by the welding in a floor of the factory, arose with an ascending air current up to a roof and then stayed for a long time. They were considered to be exposed to the welding fumes in the operation room. The personal exposure levels of welding fumes and respirable particulate were 0.159(n=8, range=0.073-0.410) $mg/m^3$ and 0.138(n=8, range=0.087-0.178) $mg/m^3$, respectively. They were lower than a threshold limit value level($5mg/m^3$) of welding fumes. Conclusions: These findings indicate that an occupational exposure to welding fumes can exist among the operators. Consequently, we need to be keeping the operators under a constant assessment in the operator process of overhead traveling crane.

• 한국방사선학회논문지
• /
• 제8권6호
• /
• pp.279-285
• /
• 2014

본 연구는 소아 심장 전산화단층촬영 검사에서 조영제의 과다 사용을 최소화하며 피폭 선량 저감화를 목적으로 조영제의 주입속도 및 심장 도달 시간 등의 변수를 고려한 스캔 지연 시간을 경험론적 방법으로 수식화함으로써 4개의 심방과 심실이 동시 조영증강 영상을 획득할 수 있는 최적화 방안을 제시하고자 하였다. 소아 심장전산화단층 검사를 시행한 소아 환자 30명을 대상으로 정성적 평가, 정량적 평가, 선량평가를 실시하였다. 결론적으로 본 연구에서 개발한 체중에 따른 조영제 양과 주입속도에 따른 스캔 지연 시간을 계산하는 경험론적 방법을 적용함으로써 왼 오른 심방과 심실의 동시 조영증강에서 소아 심장 판독에 적합한 300 HU 값 이상으로 나타났고 명확성, 선예도, 노이즈에 대한 정성적 영상 평가에서 질적 우수성을 보였으며 선량평가에서도 소아가 받는 피폭선량도 명확하게 감소되었다. 따라서 본 연구는 임상에서 조영제 과다 사용으로 인한 부작용 감소 효과를 기대 할 수 있었으며 방사선 피폭 저감화를 기대 할 수 있는 이점을 가지고 최적의 영상을 만드는데 중요한 역할을 할 것으로 판단되었다.

• Journal of Preventive Medicine and Public Health
• /
• 제26권3호
• /
• pp.371-386
• /
• 1993

This study was carried out to evaluate diagnostic criteria of noise-induced hearing loss (NIHL) among-workers in an iron foundry. Of 1,093 workers under the observation of noise-specific health examination, 184 workers were selected by way of first and second screening audiometric examination. A questionnaire survey, otological examinations, Rinne test and audiometric test were performed and the results were as follows ; The degree of hearing impairment in the left ear was more severe than in the right ear (p<0.05). The difference between hearing threshold of the first and the second hearing test at 1,000 Hz was about 5 dB with a narrow range of deviations while the difference at 4,000 Hz was about -7 dB with a wide range. Of the total study workers, 84.8% were tested within 15 hours away from noise exposure, and the rest after 16 hours. This study has identified that mean hearing loss at 4,000 Hz showed a significant statistical difference among the two study groups while mean hearing loss by 4-divided classification did not. The same phenomena were observed between the group with and without tinnitus and between the group with and without difficulty in hearing (p<0.05). Among 184 workers, 10 workers (5.4%) diagnosed as NIHL by old diagnostic criteria in contrast to 150 workers diagnosed as NIHL by the new diagnostic criteria. There was a significant difference between the two groups in the average hearing loss at 4,000 Hz and 4-divided classification (p<0.01), but there were no significant differences in age, the duration of employment, blood pressure and the duration wearing the personal hearing protector (p>0.05). If we apply Early Loss Index (ELI) method, some workers in younger age group diagnosed as NIHL by the new diagnostic criteria were fallen into within the normal range. In the mean time older age group show reverse results in contrast to the above finding. It is too early to confirm the value of the usage of the new diagnostic criteria in hearing examination. Further study is called for to verify the value of this criteria.

• 한국방사선학회논문지
• /
• 제12권7호
• /
• pp.845-852
• /
• 2018

본 연구는 심장 혈관 조영술의 투시 영상과 씨네 영상을 획득하는 데 있어서 초당 프레임 횟수를 변화함에 따라 흡수선량과 획득 영상의 화질의 추이를 살펴보는 것을 목적으로 한다. 또, FOV 확대와 Live Zoom이라는 두 가지 확대 모드에 따른 변화도 고찰 대상으로 한다. 인체모형 팬텀을 심장 혈관 조영장치 위에서 초당 프레임 횟수를 7.5, 15, 30 f/s로 설정하고 두 가지 확대 모드에 대하여 각각 5회씩 촬영하였다. 선량의 척도로서는 흡수선량과 에어 커머가 사용되었고, 화질 평가의 척도로는 잡음의 세기로서의 표준 편차(SD), 신호 대 잡음비(SNR)와 대조도 대 잡음비(CNR) 등을 활용하였다. 초당 프레임 횟수가 30부터 15, 7.5 f/s로 감소되었을 때, DAP와 에어 커머는 동일한 비율로 감소하였으나, 화질의 척도인 SD, SNR과 CNR은 거의 변화가 없었다. 확대 모드에의 의존도에 관해서는, Live Zoom이 FOV 확대와 비교하였을 때, DAP, 에어 커머와 SD에 대해서는 통계적 의미 있는 차이를 보이지 않았으나, SNR과 CNR에 있어서는 통계적 유의미한 개선을 보였다. 이러한 실험 결과에 의하여, 초당 프레임 횟수는 화질의 열화 없이 되도록 낮게 설정하는 것이 가능하며, 확대 모드도 추가적인 선량 없이 실시간 확대가 가능한 Live Zoom 모드를 적극적으로 활용 가능하며 이는 화질의 여러 척도의 저하를 가져오지 않음을 알 수 있었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.295-296
• /
• 1998

With xeroradiography appearance, DR (Digital Radiography) system have been studying for X-ray detection using photoreceptor. Also detection method for receptor charge change have been developing variably. We use photoreceptor material of a-Se(Amorphous Selenium) with high DQE, high SNR(Signal to Noise Ratio) and high transformation efficiency of X-ray signals into electrical signals. After a-Se receptor is uniformly charged by using Arc discharge, X-ray is exposed. Then a-Se receptor produce subtle charge variation and MOSFET detect charge variations. The detected signal pass A/D converter and signal processing by PC. As results, the initial voltage is 8V. It has wide dynamic range needed digital radiography system. In this study, we obtained data with changing kVp(tube potential voltage) and fixed 8mAs(tube current by exposure time) in X-ray system. However MOSFET detector for X-ray signal is not tested X-ray mAs variations. But if MOSFET detector is tested X-ray mAs variation and exactly calibrated multichannel is made and noise-reduction is done, suitable DR system readout method will be done.

• 보존과학회지
• /
• 제37권3호
• /
• pp.220-231
• /
• 2021

문화재 방사선 비파괴 투과 조사 방식은 이미지플레이트(Image Plate, IP)를 사용하는 디지털 방사선영상시스템(Computed Radiography, CR)이 도입되면서 필름방식의 아날로그 이미지에서 점차 디지털 이미지로 교체되고 있다. 방사선 비파괴 투과 조사의 이미지 품질은 촬영 조건(관전압, 관전류, 노출시간), 영상 획득 매체, 촬영 거리, 유물의 두께 등이 영향을 미친다. 이 논문에서는 목재 문화재에 주로 사용되는 수종(소나무, 밤나무, 은행나무, 상수리나무)에 X선 선원의 투과 특성을 GE사(社)의 CR 영상 시스템을 통해 획득된 이미지의 그레이 스케일(Gray Scale)을 분석한 후 신호 대 잡음비(signal to noise ratio) 및 대조도를 평가하고, 이중-선 상질계(Duplex-wire image quality indicator), 구형파 차트(line-pair gauges), 선형 식별계(Image Quality Indicator)를 이용하여 이미지를 분석하였다.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.405-417
• /
• 2015

Objectives: The aim of this study is to evaluate the association between physical factors, working conditions and occupational injuries among Korean workers. Methods: We used data from the 2nd Korean Working Conditions Survey, conducted in 2010. A total of 7,114 workers over 15 years of age were selected from among 10,019 Korean workers. The participants were interviewed using questionnaires. A multiple logistic regression model was used to analyze the associations among physical factors, working conditions and occupational injuries. Results: After the adjustment of socio-demographic factors, the odds ratio of injuries through physical factors such as vibration (adjusted Odds Ratio [aOR] 4.037, 95% CI 2.30-7.09), noise (aOR 4.562, 95% CI 2.64-7.89), high temperature (aOR 3.262, 95% CI 1.86-5.73), and low temperature (aOR 3.358, 95% CI 1.76-6.41) were greater in the exposed group than in the non-exposed group. The odds ratios of occupational injury(aOR 5.272, 95% CI 3.19-8.7 for very high speed work, aOR 3.303, 95% CI 1.95-5.60 for tight deadlines, and aOR 3.641, 95% CI 1.72-7.70 for not enough time to work) increased with increased work demands. Conclusions: In this study, physical factors such as vibration, noise, and high and low temperatures were significantly correlated with occupational injuries according to the increase in exposure intensity(p for trend <0.001). Also, working conditions such as high-speed work, tight deadlines and insufficient time to work showed significant associations with occupational injuries(p for trend<0.001).