• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.13 no.3
• /
• pp.73-84
• /
• 2005

Hanseo University's Tae-an Airfield was opened in July, 2005 for aeronautical education such as aircraft flight, air traffic control, avionics, etc., and will play an important part as a base for local economic and industrial developments. On the contrary, the aircraft noise from the airfield will give an impact against the vicinity of the airfield and become a big issue which the airfield authority has to solve. The aim of this study is to analyse the aircraft noise contour in vicinity of the airfield and to make understand the people around the airfield how much the aircraft noise will have an effect on. For the prediction of the aircraft noise in the local area, this study showed the method to assess the aircraft noise in the developed countries for aviation, and the result to compute WECPNL by INM 6.1 after encoding the various data including environmental input data, tract, and profile. The major results of the study can be summarized as follows ; While the area with influence contour of noise from 75 to 80 WECPNL is 0.555$km^2$, the area from 80 to 85 is 0.343$km^2$, and the area with influence contour of noise over 85 WECPNL is 0.163$km^2$. In addition, there are 4 houses in the contour over 85 WECPNL and the inhabitants(10 people) in this area will have effect from the noise. Therefore Tae-an airfeild authority is preparing the noise-prevention method or noise abatement program. Finally, according to the noise contour, it is one of the best way of decreasing the effect of aircraft noise that 33 runway is assigned as calm-wind runway because there is no resident in the area around 15 threshold.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.12-17
• /
• 2007

The dynamic false contour noise was analyzed with consideration for the phosphor decay time of an ac PDP by computer simulation based on the measurement of the 1/10 phosphor decay times of the primary colors red, green and blue at the main wavelengths of each phosphor. The noise level of dynamic false contour is strongly dependent on phosphor decay time. The noise level decreases incrementally with the phosphor decay time, whereas the noise width increases. The moving velocity of an object does not affect the noise level. The entire experiment was performed under the condition of 8 subfields ADS driving scheme, 2.5[${\mu}sec$] scan speed, and 5[${\mu}sec$] sustain period with VGA grade panel.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1462-1467
• /
• 2013

A pseudo 480-Hz drive method has been proposed to reduce the dynamic false contour noise that occurs on flat panel displays with displaying grayscale image in the digital mode, such as plasma display panels. The proposed method makes the image movements nearly continuous by rearranging the 8-bit image data displayed for 1 TV field into 8 subfields. The position of the image data rearranged in subfields has been optimized on the basis of the speed of the moving image by computer simulations for the dynamic false contour noise. It is verified that a significant reduction in the dynamic false contour noise is achieved with the proposed method as compared to the conventional noise reduction technologies. Moreover, to reduce the noise in digital mode displays, the proposed technology requires only 8 subfields. Therefore, there is no reduction in the brightness of the image.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.457-464
• /
• 1999

To develop managing guidance of occupational noise exposure for metal working facility, we have studied about drafting contour map of noise exposure, methods of noise assessment and actual calculation method of time weighted noise exposure. Therefore we have suggested that contour maps of noisy workplace are very important for controlling metal working fluid facility and two kinds of noise assessment method, so called, personal andstatic exposure are necessary to avoid argument between workers and managing group. Finally we would like recommend that the Korean specification of noise exposure should be modified to protect ONIHL(oocupational noise induced hearing loss).

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.24-29
• /
• 1999

In this paper, a simple contour-preserving filtering algorithm is proposed. The goal of the contour-preserving filtering method is to remove noise ad granularity as the preprocessing for the image segmentation procedure. Our method finds edge map and separates the image into the edge region and the non-edge region using this edge map. For the non-edge region, typical smoothing filters could be used to remove the noise and the small areas during the segmentation procedure. The result of simulation shows that our method is slightly better than the typical methods such as the median filtering and gradient inverse weighted filtering in the point of view of analysis of variance (ANOVA).

• Journal of Environmental Impact Assessment
• /
• v.21 no.6
• /
• pp.893-901
• /
• 2012

Aircraft noise model such as FAA Integrated Noise Model(INM) has recently been used for forecasting the impact of noise in a residential area near an airport and quantifying the effect of various options for noise mitigation. The noise modeling should be reliable and precise in order to ensure the quality of the results provided. In this study, the validation of the noise levels simulated by the INM against measurement data recorded continuously at multiple monitoring sites was discussed. As a result of validation, the quality of the input data used as a fixed point profiles for the INM was enhanced. The noise contour maps were designed as a way to evaluate the aircraft noise of the vicinity of the airfield. The results of this study indicate that the validation of aircraft noise model by the measurement data would be required for the accurate assessment of the aircraft noise levels.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1149-1156
• /
• 2015

This paper proposes the hand contour detector which is robust to noises. Existing methods reduce noises by applying morphology to extracted edges, detect finger tips by using the center of hands, or exploit the intersection of curves from hand area candidates based on J-value segmentation(JSEG). However, these approaches are so vulnerable to noises that are prone to detect non-hand parts. We propose the noise tolerant hand contour detection method in which non-skin area noises are removed by applying skin area detection, contour detection, and a threshold value. By using the implemented system, we observed that the system was successfully able to detect hand contours.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.85-88
• /
• 2000

We present a new approach to analyzing the dynamic false contour noise of AC plasma display panels (PDP), which is known to degrade the image quality severely. Compared with the existing methods that consider only the amount of light emission from PDP during 1 field time, the proposed approach uses the impulse response model of the human vision system and estimates how the human beings actually feel as the function of time. Experimental results using various benchmark sub-field scan algorithms are included.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.1
• /
• pp.81-94
• /
• 1998

In order to extract the contour of interesting object in the image, Kass suggested the Active Contour Model called "Snakes". Snakes is a model which defines the contour of image energy. It also can find the contour of object by minimizing these energy functions. The speed of this model is slow and this model is sensitive of initialization. In order to improve these problems, Gunn extracted the accurate contour by using two initialization. and operated to less sensitive of initialization. This method could extract more accurate contour than the existing method, but it had no effect in the speed and it was sensitive of noise. This paper applied to the Energy Minimization Algorithm about only the pixel within the window applying the window of 8$\times$8 size at each contour point consisting Snakes in order to solve these problems. The method offered in this paper is applied to extract the contour of original image and cup image added to gaussian noise. By tracking the face using this offered method, it is applied to virtual reality and motion tracking. tracking.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.27-33
• /
• 2016

In this paper, we propose the bilateral filter based on median value that can reduce random noise and impulse noise with minimal loss of contour information. In general, EO / IR camera to generate a random or impulse noise due to a number of reasons. This noise reduces the performance of detecting and tracking by signal processing. To reduce noise, our proposed bilateral filter sorts the values of the target pixel and the peripheral pixels, and extracts a median filter coefficients of the Gaussian type. Then to extract the Gaussian filter coefficient involved with the distance between the center pixel and the surrounding pixels. As using those filter coefficients, our proposed method can remove the various noise effectively while minimizing the loss of the contour information. To validate our proposed method, we present experimental results for several IR images.