• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.329-336
• /
• 2000

A method for automatic extraction of 2-dimensional finite element connectivities by searching the shortest closed path from a certain node to the starting node was developed. Only the best path among the possible paths was probed. The uniqueness and validity of the extracted path were examined. The proposed method was proved to be complete. Examples show that the proposed method can extract elements exactly from the irregular mesh which can not be handled easily by the conventional automatic mesh generation.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.193-200
• /
• 2019

The auto-encoder network which is a good candidate to handle the modeling of the signal strength attenuation is designed for denoising and compensating the distortion of the received data. It provides a non-linear mapping function by iteratively learning the encoder and the decoder. The encoder is the non-linear mapping function, and the decoder demands accurate data reconstruction from the representation generated by the encoder. In addition, the adaptive network width which supports the automatic generation of new hidden nodes and pruning of inconsequential nodes is also implemented in the proposed algorithm for increasing the efficiency of the algorithm. Simulation results show that the proposed method can improve the neural network training surface to achieve the highest possible accuracy of the signal modeling compared with the conventional modeling method.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.880-883
• /
• 2002

We propose an effective wavelength converter method using frequency shifter for photonic node, and examine the scalability of Generalized Multiprotocol Label Switching (GMPLS) networks. The ana1ysis is examined based on signal to noise ratio (SNR) for present 2.4 and 10 Gbit/s Synchronous Digital Hierarchy (SDH) networks, and next generation 2.7 and 10.8 Gbit/s Optical Transport Networks (OTN) format The proposed 100 channels GMPLS networks using optical frequency shifters are shown to be applicable to transmission network spanning over 1206 km(24 nodes) in 2.7 Gbit/s trunk networks. Transmission over more than 310 km (6 nodes) is also possible in 2.7 Gbit/s Metroporitan Area Networks(MAN).

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.165-167
• /
• 2006

In this paper we present a new-generation sensor network processor which is not optimized in circuit level, but in system architecture level. The new design build on a conventional processor architecture, improving the design by focusing on application oriented specification, ISA, and micro-architectural optimization that reduce overall design size and advance energy-per-instruction. The design employs harvard architecture, 8-bit data paths, and an compact 19 bit wide RISC ISA. The design also features a unique interrupt handler which offloads periodical monitoring jobs from the main part of CPU. Our most efficient design is capable of running at 300 KHz (0.3 MIPS) while consuming only about few pJ/instruction.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.187-188
• /
• 2006

In CDMA based mobile communication network, signaling messages are routed through Signaling Transfer Point(STP) which is responsible for MTP layer 3 switching. As WCDMA based UMTS network is considered as next generation technology allowing global roaming services, all nodes in networks have their own identity number called Global Title(GT). Therefore, it is essential to introduce Signaling Gateway(SG) responsible for SCCP layer switching to solve the problem each node has all GT tables including even all overseas nodes. In this paper, we propose the signaling network architecture in UMTS networks using SG and we show that we can reduce CAPEX and OPEX in each node. To show the validity of the proposed method some simulations are given in which the results can be expected by intuitive observation.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.67-72
• /
• 2021

MANET(Mobile Ad Hoc Network) is the structure in which a source node communicates with a destination node by establishing a route with neighbor nodes without using the existing wired or wireless network. Therefore, the routing protocol for MANET must correspond well to changes in the channel state of moving nodes, and should have simple operation, high reliability, and no routing loop. In this paper, the simulation was perform by using a traffic model with on/off two states provided by the NS-3 network simulator. Also, the duration of the ON state and the duration of the OFF state used the traffic where inter arrival time of data is irregular by generating random values with constant, exponential distribution, and Pareto distribution. The performance of the DSDV, OLSR, and AODV protocols was compare and analyzed using the generated traffic model.

• Electronics and Telecommunications Trends
• /
• v.38 no.6
• /
• pp.52-61
• /
• 2023

With semiconductor scaling approaching the physical limits, devices including CMOS (complementary metal-oxide-semiconductor) components have managed to overcome yet are currently struggling with several technical issues like short-channel effects. Evolving from the process node of 22 nm with FinFET (fin field effect transistor), state-of-the-art semiconductor technology has reached the 3 nm node with the GAA-FET (gate-all-around FET), which appropriately addresses the main issues of power, performance, and cost. Technical problems remain regarding the foundry of GAA-FET, and next-generation devices called post-GAA transistors have not yet been devised, except for the CFET (complementary FET). We introduce a CFET that spatially stacks p- and n-channel FETs on the same footprint and describe its structure and fabrication. Technical details like stacking of nanosheets, special spacers, hetero-epitaxy, and selective recess are more thoroughly reviewed than in similar articles on CFET fabrication.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.103-107
• /
• 2007

Computational Fluid Dynamics (CFD in short) approach is now playing an important role in the engineering process recently. Generating proper grid system for the region of interest in time is prerequisite for the efficient numerical calculation of flow physics using CFD approach. Grid generation is, however, usually considered as a major obstacle for a routine and successful application of numerical approaches in the engineering process. CFD approach based on the unstructured grid system is gaining popularity due to its simplicity and efficiency for generating grid system compared to the structured grid approaches. In this paper an automated triangular surface grid generation using CAD surface data is proposed According to the present method, the CAD surface data imported in the STL format is processed to identify feature edges defining the topology and geometry of the surface shape first. When the feature edges are identified, node points along the edges are distributed. The initial fronts which connect those feature edge nodes are constructed and then they are advanced along the CAD surface data inward until the surface is fully covered by triangular surface grid cells using Advancing Front Method. It is found that this approach can be implemented in an automated way successfully saving man-hours and reducing human-errors in generating triangular surface grid system.

• Journal of computational fluids engineering
• /
• v.12 no.4
• /
• pp.68-73
• /
• 2007

Computational Fluid Dynamics (CFD) approach is now playing an important role in the engineering process in these days. Generating proper grid system in time for the region of interest is prerequisite for the efficient numerical calculation of flow physics using CFD approach. Grid generation is, however, usually considered as a major obstacle for a routine and successful application of numerical approaches in the engineering process. CFD approach based on the unstructured grid system is gaining popularity due to its simplicity and efficiency for generating grid system compared to the structured grid approaches, especially for complex geometries. In this paper an automated triangular surface grid generation using CAD(Computer Aided Design) surface data is proposed. According to the present method, the CAD surface data imported in the STL(Stereo-lithography) format is processed to identify feature edges defining the topology and geometry of the surface shape first. When the feature edges are identified, node points along the edges are distributed. The initial fronts which connect those feature edge nodes are constructed and then they are advanced along the CAD surface data inward until the surface is fully covered by triangular surface grid cells using Advancing Front Method. It is found that this approach can be implemented in an automated way successfully saving man-hours and reducing human-errors in generating triangular surface grid system.

• International Journal of Computer Science & Network Security
• /
• v.21 no.9
• /
• pp.1-10
• /
• 2021

The Internet of things (IoT) is the main advancement in data processing and communication technologies. In IoT, intelligent devices play an exciting role in wireless communication. Although, sensor nodes are low-cost devices for communication and data gathering. However, sensor nodes are more vulnerable to different security threats because these nodes have continuous access to the internet. Therefore, the multiparty security credential-based key generation mechanism provides effective security against several attacks. The key generation-based methods are implemented at sensor nodes, edge nodes, and also at server nodes for secure communication. The main challenging issue in a collaborative key generation scheme is the extensive multiplication. When the number of parties increased the multiplications are more complex. Thus, the computational cost of batch key and multiparty key-based schemes is high. This paper presents a Secure Multipart Key Distribution scheme (SMKD) that provides secure communication among the nodes by generating a multiparty secure key for communication. In this paper, we provide node authentication and session key generation mechanism among mobile nodes, head nodes, and trusted servers. We analyzed the achievements of the SMKD scheme against SPPDA, PPDAS, and PFDA schemes. Thus, the simulation environment is established by employing an NS 2. Simulation results prove that the performance of SMKD is better in terms of communication cost, computational cost, and energy consumption.