• 제목/요약/키워드: Node Generation

검색결과 347건 처리시간 0.034초

A Study on the Authenticity Verification of UxNB Assisting Terrestrial Base Stations

  • Kim, Keewon;Park, Kyungmin;Kim, Jonghyun;Park, Tae-Keun
    • 한국컴퓨터정보학회논문지
    • /
    • 제27권12호
    • /
    • pp.131-139
    • /
    • 2022
  • 본 논문에서는 지상 기지국을 보조하는 UxNB의 진본성 검증을 위해, 3GPP TR 33.809에 제시된 시스템 정보(System Information) 보안을 위한 솔루션들을 UxNB 관점에서 분석한다. 3GPP(Third Generation Partnership Project)의 정의에 따르면, UxNB는 UAV(Unmanned Aerial Vehicle)에 탑재한 기지국(Base Station)이며, UAV에 의해 공중에서 운반되며 UE(User Equipment)에게 연결을 제공하는 무선 접속 노드이다. 시스템 정보(System Information) 보안을 위한 솔루션들은 해시(Hash) 기반, MAC(Message Authentication Codes) 기반, 디지털 서명(Digital Signature) 기반으로 분류할 수 있으며, 각 범주별로 대표적인 솔루션을 하나씩 소개한다. 각 솔루션별로 UxNB의 진본성 검증 관점에서 사전 배포 정보 및 업데이트, UxNB의 보안 정보 유출, 추가적으로 요구되는 연산량 및 전송량 측면에서 해당 솔루션들을 비교 분석한다. 분석 결과, UxNB의 진본성 검증을 위한 솔루션은 UxNB에 저장될 비밀 정보가 최소화되어야 하고, 안전한 장소에 저장되어야 하고, 무선으로 업데이트되면 이를 위해서 암호화를 적용해야 한다. 또한 UxNB의 낮은 컴퓨팅 파워와 전원 부족의 특성으로 인하여 연산량 및 전송량을 최소화해야 한다.

Diffie-Hellman 기반 사물인터넷 센서노드 키 관리 연구 (The research on Diffie-Hellman-based IoT Sensor Node key management)

  • 홍성혁;유진아
    • 한국융합학회논문지
    • /
    • 제8권12호
    • /
    • pp.9-14
    • /
    • 2017
  • 최근 저가격의 소형화, 저전력 기술과 인터넷을 이용하여 통신이 가능한 스마트 센서의 기술의 발달에 힘입어 사물인터넷이 발전하고 있다. 특히 사물인터넷 (Internet of Things : IoT) 기반에서의 안전한 정보 전송을 위한 키 관리 관련 연구가 활발히 진행되고 있다. 그러나 사물인터넷은 센서를 이용한다. 그렇기 때문에 저전력과 저용량 등의 제약이 심하며, 결과적으로 일반적인 보안의 방법으로 키를 관리하기 어렵다. 그러나 사물인터넷의 지속적 발전을 위해서는 안전한 키 관리의 문제는 필수적 해결과제이다. Diffi-Hellman 키 교환방식은 센서노드에 적합하지 않아 본 논문에서는 효율적인 키 관리하는 것을 제안한다. 따라서 본 논문에서는 IoT기반에서 통신을 위한 키 생성을 통해 물리적 제약받지 않고 사물간 안전한 통신 기술을 제안한다.

NetFlow 기반 IPv6 사용자 Flow traffic 모니터링 (NetFlow based IPv6 user's Flow traffic monitoring)

  • 김성수;송왕철;오용택;최덕재
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
    • /
    • pp.42-46
    • /
    • 2006
  • Gbps급의 대역폭을 지원하는 차세대 인터넷이 등장함에 따라 다양한 초고속 응용 서비스들이 개발되어 시험 운용되고 있다. 이런 초고속 응용 서비스를 이용하는 도중에 문제가 발생하면 그 원인을 파악하기 어렵다. 하지만 특정 사용자 flow traffic에 대한 정보(종단 간 라우팅 경로, 구간별 패킷과 데이터 전송률과 라우터 상태정보)를 실시간으로 확인 할 수 있다면 문제 원인을 파악, 개선하기가 수월해질 것이다. 현재 한 지점에서 flow traffic을 모니터링 하는 시스템은 개발되어 있으나 사용자 flow traffic의 종단 간 흐름을 모니터링 할 수 있는 시스템은 개발되어 있지 않다. 따라서 본 연구에서는 사용자 flow data의 종단 간 라우팅 경로와 각 구간별 패킷 전송률과 데이터 전송률을 수치로 제공함으로써 데이터 소실 구간을 실시간으로 파악 가능한 종단 간 Flow 모니터링 시스템을 제안하고 구현하였다. 또한 IPv6을 사용하는 사용자 flow traffic에 대해서도 flow traffic 모니터링이 가능 하도록 구현 하였다.

  • PDF

배전계통의 손실감소 및 전압 보상을 위한 커패시터 최적 배치 및 운용 (Optimal Capacitor Placement and Operation for Loss Minimzation and Improvement of Voltage Profile in Distribution System)

  • 송현선
    • 조명전기설비학회논문지
    • /
    • 제13권3호
    • /
    • pp.48-55
    • /
    • 1999
  • 본 연구에서는 방사상 배전계통에 있어서 손실감소 및 전압보상을 위한 커패시터 최적배치 및 운용 방안을 제시하였다. 커패시터 배치와 관련된 비용함수를 실제 뱅크단위로 이산성을 고려하여 계단함수로 정식화하였다. 불연속이면서 미분 불가능한 함수인 커패시터 배치와 관련된 비용함수의 해를 효율적으로 구하기 위하여 전역적탐색기법인 GA를 이요하였다. 특히, GA의 스트링을 커패시터가 배치될 모선의 인덱스와 투입량인 뱅크단위로 동시에 구성하여 기존의 방법보다 효율적으로 해를 탐색하였다. 또한 스트링의 길이를 변화시킬 수 있는 길이 돌연변이(length mutation) 연산자를 사용하므로써 효과적으로 커패시터 설치위치의 수를 결정할 수 있었다. 제안한 커패시터 설치위치와 투입량을 동싱에 탐색할 수 있는 방안으로부터 커패시터의 최소 투입량으로 다양한 부하레벨에서 전력손실을 감소시키고, 전압강하를 적절히 보강시킬수 있다. 이에 대한 효용성을 입증하기 위하여 22kV-9-section feeler로 구성된 방사상 배전계통에 적용하였다.

  • PDF

전침 자극과 전기 자극의 적용이 근육압좌손상이 유발된 흰쥐의 골격근 내 혈관내피성장인자 발현에 미치는 영향 (Effects of Electroacupuncture and Electrical Stimulation on VEGF Expression After Muscle Crush Injury in Rats)

  • 김민희;이현민;박은세;남기원;김진상
    • 한국전문물리치료학회지
    • /
    • 제13권2호
    • /
    • pp.9-15
    • /
    • 2006
  • Skeletal muscle injury occurs frequently in sports medicine and is the most general form of injury followed by physical impact. There are growth factors which conduct proliferation, differentiation, and synthesis of myogenic prodromal cells and regulate vascular generation for the continued survival of myocytes. The purpose of the present study was to confirm the effects of electroacupuncture (EA) and electrical stimulation (ES) on muscle recovery processes according to vascular endothelial growth factor (VEGF) expression. Eighteen Sprague-Dawley rats were separated into 2 experimental groups and a controlled group. All animals had suffered from crush damage in the extensor digitorum longus for 30 seconds and were killed 1, 3, and 7 days after injury. 30 Hz and 1 mA impulsion for 15 minutes was applied to the EA experimental groups Zusanli (ST36) and Taichong (LR3) using electroacupuncture and the same stimulation was applied to the ES group using an electrical node. Hematoxyline-Eosin staining and VEGF immunohistochemistry were used to ascertain the resulting muscle recovery. There were few morphological differences between the EA and ES groups, and both groups were observed to have tendencies to decrease atrophy as time passed. In the controlled group, gradually diminishing atrophy could be observed, but their forms were mostly disheveled. There were few differences in VEGF expression between the EA and ES groups, and tendencies to have an increased quantity of VEGF with the lapse of time were observed in both groups. In the controlled group, a little VEGF expression could be observed merely 7 days after injury. In conclusion, EA and ES contributed to muscle recovery processes and could be used for the treatment of muscle injury.

  • PDF

Improving the Key Search using Parallelism in RFID Privacy Protection

  • 신명숙;김충원;이준
    • 한국전자통신학회논문지
    • /
    • 제2권1호
    • /
    • pp.19-24
    • /
    • 2007
  • Abstract. In the ubiquitous environment of the next generation, RFID is predicted to occupy an important technical location and also expected to apply to various fields. However, the properties of tags in itself which is the core of RFID have a dysfunction like an invasion of privacy for user. An existing cryptanalytic protection scheme of the information leakage have a difficult problem to apply to RFID tags for privacy protection. We applied Ohkubo et al.'s scheme to the protection of the tag's information efficiently in the RFID system environment using low-cost tags. But, this method has all informations of tagsto identify tag's ID and then performs the process of identification in sequence in the Back-end server. These processes have lots of computations so that it have problems about a scalability. In this paper, we are based on Ohkubo et al.'s scheme to solve problems, and then analyze the parallelism with the Hellman's tradeoff method, divide it into nodesin parallel. In this paper, we are based on Okubo et al.'s scheme to solve problems, and then analyze the parallelism with Hellman's tradeoff method, divide it into the ${\omega}$ node in parallel. as a result, we can reduce the computing complexity of key search to $O(\frac{m^{2/3}n^{2/3}}{\omega})$ seconds from O(mm) seconds. finally we show the results to be enhanced the scalability.

  • PDF

센서 네트워크와 인터넷(IPv4/IPv6)과의 동적 주소 연동 방안 (Dynamic Address Interworking Scheme between Wireless Sensor Network and Internet Based on IPv4/IPv6)

  • 김정희;권훈;곽호영;도양회;김대영;김도현
    • 한국정보통신학회논문지
    • /
    • 제10권8호
    • /
    • pp.1510-1518
    • /
    • 2006
  • 집적회로 기술, 무선 통신 기술, 그리고 마이크로 컴퓨팅 등의 기술 발전에 힘입어, 유비쿼터스 컴퓨팅 환경을 실현하고 차세대 IT 산업을 이끌 새로운 기술로서 센서 네트워크 기술이 점차 주목 받고 있으며 많은 연구가 활발히 수행되고 있다. 향후 센서 네트워크는 이를 구성하는 각각의 센서 노드들, 그리고 더 나아가 센서 네트워크 자체도 지속적으로 생성되거나 소멸되면서 기존의 네트워크와 상호 통신하고 주위환경에 맞추어 변화하며 동적으로 진화해 나갈 전망이며, 서로 다른 주소 체계를 사용하고 있는 이들의 상호 연동이 요구되어지고 있다. 따라서 본 논문은 센서 네트워크와 인터넷과의 상호 통신을 위한 주소 연동 방안을 제안한다. 제안된 연동 방안은 Zigbee 기반 센서 네트워크의 주소체계와 인터넷의 주소체계인 IP 기반 인터넷 주소체계가 서로 통신할 수 있도록 하기 위하여 동적으로 주소를 연동하는 방안이며, Berkeley TinyOS와 mica motes, 그리고 IP 프로토콜을 이용하여 제안된 주소 연동방안을 구현하였다. 또한 실험을 통해 제안된 연동 방안을 검증하였다.

와이브로 망에서 IPv6 이동 단말의 교차 계층 핸드오버 기법 (A Cross-layering Handover Scheme for IPv6 Mobile Station over WiBro Networks)

  • 장희진;한연희;황승희
    • 한국정보과학회논문지:정보통신
    • /
    • 제34권1호
    • /
    • pp.48-61
    • /
    • 2007
  • 국내의 와이브로 기술은 단말의 이동성을 지원하기 때문에 사용자가 임의의 서브넷 내부에서 이동 할 때에도 지속적인 인터넷 서비스를 제공한다. 또한, 차세대 인터넷 지원 기술인 IPv6 및 Mobile IPv6 (MIPv6)은 이동 단말에 주소를 할당하고, 이러한 단말들이 서로 다른 서브넷을 이동 할 때에도 기존의 인터넷 세션을 유지할 수 있도록 지원하는 최신 기술이다. 하지만, VoIP (Voice over IP)와 같은 실시간 서비스를 만족시킬 수준의 이동성을 지원하려면, 와이브로 망 및 단말에 최적화된 고속 IPv6 핸드오버 기술 개발이 선행되어야 한다. 본 논문에서는 IPv6 단말이 와이브로 망에서 서브넷 간 이동을 시도할 때, 핸드오버 지연 시간을 최소화하는 최적화된 핸드오버 기법을 제안한다. 제안하는 기법은 고속 핸드오버를 지원하기 위한 IETF 대표 프로토콜인 Fast Mobile IPv6 (FMIPv6)에 기반을 두고 있으며 2계층 와 이브로 MAC (Medium Access Control)과 3계층 FMIPv6 과의 밀접한 상호 작용 및 관련 핸드오버 절차로 구성된다. 마지막으로, 수학적 성능 분석을 통하여 와이브로 망에서 운영되는 FMIPv6의 핸드오버 지연 시간을 계산하여 그 결과를 제시한다.

Bulk Micromachined Vibration Driven Electromagnetic Energy Harvesters for Self-sustainable Wireless Sensor Node Applications

  • Bang, Dong-Hyun;Park, Jae-Yeong
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권6호
    • /
    • pp.1320-1327
    • /
    • 2013
  • In this paper, two different electromagnetic energy harvesters using bulk micromachined silicon spiral springs and Polydimethylsiloxane (PDMS) packaging technique have been fabricated, characterized, and compared to generate electrical energy from ultra-low ambient vibrations under 0.3g. The proposed energy harvesters were comprised of a highly miniaturized Neodymium Iron Boron (NdFeB) magnet, silicon spiral spring, multi-turned copper coil, and PDMS housing in order to improve the electrical output powers and reduce their sizes/volumes. When an external vibration moves directly the magnet mounted as a seismic mass at the center of the spiral spring, the mechanical energy of the moving mass is transformed to electrical energy through the 183 turns of solenoid copper coils. The silicon spiral springs were applied to generate high electrical output power by maximizing the deflection of the movable mass at the low level vibrations. The fabricated energy harvesters using these two different spiral springs exhibited the resonant frequencies of 36Hz and 63Hz and the optimal load resistances of $99{\Omega}$ and $55{\Omega}$, respectively. In particular, the energy harvester using the spiral spring with two links exhibited much better linearity characteristics than the one with four links. It generated $29.02{\mu}W$ of output power and 107.3mV of load voltage at the vibration acceleration of 0.3g. It also exhibited power density and normalized power density of $48.37{\mu}W{\cdot}cm-3$ and $537.41{\mu}W{\cdot}cm-3{\cdot}g-2$, respectively. The total volume of the fabricated energy harvesters was $1cm{\times}1cm{\times}0.6cm$ (height).

Energy Balance and Power Performance Analysis for Satellite in Low Earth Orbit

  • Jang, Sung-Soo;Kim, Sung-Hoon;Lee, Sang-Ryool;Choi, Jae-Ho
    • Journal of Astronomy and Space Sciences
    • /
    • 제27권3호
    • /
    • pp.253-262
    • /
    • 2010
  • The electrical power system (EPS) of Korean satellites in low-earth-orbit is designed to achieve energy balance based on a one-orbit mission scenario. This means that the battery has to be fully charged at the end of a one-orbit mission. To provide the maximum solar array (SA) power generation, the peak power tracking (PPT) method has been developed for a spacecraft power system. The PPT is operated by a software algorithm, which tracks the peak power of the SA and ensures the battery is fully charged in one orbit. The EPS should be designed to avoid the stress of electronics in order to handle the main bus power from the SA power. This paper summarizes the results of energy balance to achieve optimal power sizing and the actual trend analysis of EPS performance in orbit. It describes the results of required power for the satellite operation in the worst power conditions at the end-of-life, the methods and input data used in the energy balance, and the case study of energy balance analyses for the normal operation in orbit. Both 10:35 AM and 10:50 AM crossing times are considered, so the power performance in each case is analyzed with the satellite roll maneuver according to the payload operation concept. In addition, the data transmission to the Korea Ground Station during eclipse is investigated at the local-time-ascending-node of 11:00 AM to assess the greatest battery depth-of-discharge in normal operation.