• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.580-597
• /
• 2013

Three materials SUS304, 9% Ni steel and Al 5083-O alloy, which are considered possible candidate for International Maritime Organization (IMO) type B Cargo Containment System, were studied. Monotonic tensile, fatigue, fatigue crack growth rate and Crack Tip Opening Displacement tests were carried out at room, intermediate low ($-100^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures. The initial yield and tensile strengths of all materials tended to increase with decreasing temperature, whereas the change in elastic modulus was not as remarkable. The largest and smallest improvement ratio of the initial yield strengths due to a temperature reduction were observed in the SUS304 and Al 5083-O alloy, respectively. The fatigue strengths of the three materials increased with decreasing temperature. The largest increase in fatigue strength was observed in the Al 5083-O alloy, whereas the 9% Ni steel sample showed the smallest increase. In the fatigue crack growth rate test, SUS304 and Al 5083-O alloy showed a decrease in the crack propagation rate, due to decrease in temperature, but no visible improvement in da/dN was observed in the case of 9% Ni steel. In the Crack Tip Opening Displacement (CTOD) test, CTOD values were converted to critical crack length for the comparison with different thickness specimens. The critical crack length tended to decrease in the case of SUS304 and increase for the Al 5083-O alloy with decreasing temperature. In case of 9% Ni steel, change of critical crack length was not observed due to temperature decrease. In addition, the changing material properties according to the temperature of the LNG tank were analyzed according to the international code for the construction and equipment of ships carrying liquefied gases in bulk (IGC code) and the rules of classifications.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.3
• /
• pp.75-83
• /
• 2019

Purpose: There are no clear criteria for slip performance in the BF certification process, so the evaluator relies on subjective judgments depending on the field situation. Physical criteria for determining the slip performance of various floor finishes are not clear. C.S.R., the only criterion currently being used to check slip performance, may raise questions about its coverage, feasibility and reliability. Method: For an analysis of domestic standards and status, KS L 1001, KS M 3510, and KS F 2375. External standards are analyzed for ADA Standard, ANSI Standard, and BS EN Standard. Analyze the test methods and evaluation criteria of O-Y-PSM, BPT, and the dynamic slip resistance test used in these criteria. It also presents an improvement plan for the rational presentation of standards. Results: To date, various kinds of test methods and measuring devices of the slip resistance coefficient have been developed, but there are not many ways to trust useful results related to user safety. Reliability and thoroughly verified test methods and criteria should be used to assess the slip performance of the floor. In order to improve the standard for the evaluation of slip performance in Korea, the existing standard should first be raised to the same level as the overseas standard, and the application of the discriminatory standard should be applied considering the characteristics and usage patterns of each space. Implication: Currently, Korean standards propose various test methods, but the proper use of test methods, scope and assessment criteria are not established, so improvement of the comprehensive standard is necessary.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.1
• /
• pp.17-29
• /
• 1996

N-substituted acrylamide hydrogel is reported to have the feature of bing transparent and sensitive enough to response to a temperature stimulus below the temperature of phase transition. Especially at the near of 35 C it becomes shrunk and opaque very quickly. It has also the characteristic of reversing swelling and shrinking. The experiment showed that it is possible to produce a functional gel of super water absorption with the process of free radical polymerizing PVA(polyvinylalcohol) and PAA(polyacrylamide), and crosslinking. The ratio of shrinking and swelling caused by copolymerization rises 10% to 80% at the each temperature of 20 C, 30 C, 40 C, respectively. Phase transition temperature of this gel by copolymerization is50 C while that of ordinary N-substituted acrylamides is between 32~35 C. This temperature reaches the rearing limit of animals and plants so that volumetric transition polymer gel can be ulilized in varying fields such as agriculture/gardening which are water-using field, on-off switch sensing temperature and volumetric variation, processing of liquid wastes and civil engineering works, architecture and electronics. We have no doubt that this material will be the high-functional resin in the hi-tech age of the near future.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.895-904
• /
• 2004

Due to the frequent and unpredictable topology changes, multicast still remains as challenge and no one-size-fits-all protocol could serve all kinds of needs in mobile ad hoc network. In this paper, we propose a novel scheme of Hierarchical Eulerian Ring Oriented Multicast Architecture (HEROMA) over mobile ad hoc network. It has features that concentrate on efficiency and robustness simultaneously. It is also an application-driven proposal for hazard detection. Architectures including Eulerian ring, hierarchy and multicast agent are investigated in detail Simulation results different level of improvements on control traffic, end-to-end delay and packet delivery ratio by comparing with tree-based and mesh-based multicast protocols.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.23-28
• /
• 1999

This study measured transpiration rate of urban trees and albedos of urban surfaces, and examined the function of microclimate amelioration by urban greenspace. Transpiration rates of trees were highest in July and August of growing months. Transpiration per unit leaf area for the two months was 300-350 g/$m^2$/h for Platanus occidentalis, 210-270 g/$m^2$/h for Ginkgo biloba and Zelkova serrata, and 130-140 g/$m^2$/h for Acer palmatum. Surface albedos were 0.09 for asphalt paving and 0.68 for white wall, which reveals that light-colored surfaces are better than dark-colored ones to lower the heat build-up. Due to lack of evapotranspiration, concrete surfaces were, at t midafternoon maximum, 8$^{\circ}C$ hotter than grass ones, though the albedo of concrete paving was higher thant that of grass and trees. Summer air temperatures at places with 12% and 22% cover of woody plants were, respectively, 0.6$^{\circ}C$ and 1.4$^{\circ}C$ cooler than a place with no vegetation. To mitigate the impacts of urban heat islands, required are minimization of hard surfaces, light-coloring for building surfaces, and greenspace enlargement including more plantings.

• IMMUNE NETWORK
• /
• v.12 no.1
• /
• pp.18-26
• /
• 2012

Background: Vitamin C is an essential nutrient for maintaining human life. Vitamin C insufficiency in the plasma is closely related with the development of scurvy. However, in vivo kinetics of vitamin C regarding its storage and consumption is still largely unknown. Methods: We used $Gulo^{-/-}$ mice, which cannot synthesize vitamin C like human. Vitamin C level in plasma and organs from $Gulo^{-/-}$ mice was examined, and it compared with the level of wild-type mice during 5 weeks. Results: The significant weight loss of $Gulo^{-/-}$ mice was shown at 3 weeks after vitamin C withdrawal. However, there was no differences between wild-type and vitamin C-supplemented $Gulo^{-/-}$ mice (3.3 g/L in drinking water). The concentration of vitamin C in plasma and organs was significantly decreased at 1 week after vitamin C withdrawal. Vitamin C is preferentially deposited in adrenal gland, lymph node, lung, and brain. There were no significant changes in the numbers and CD4/CD8 ratio of splenocytes in $Gulo^{-/-}$ mice with vitamin C withdrawal for 4 weeks. And the architecture of spleen in $Gulo^{-/-}$ mice was disrupted at 5 weeks after vitamin C withdrawal. Conclusion: The vitamin C level of $Gulo^{-/-}$ mice was considerably decreased from 1 week after vitamin C withdrawal. Vitamin C is preferentially stored in some organs such as brain, adrenal gland and lung.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.3
• /
• pp.65-71
• /
• 2004

This study analysed data on the weather of Seoul, Gwangju and Mokpo to examine the degree of temperature increase in those Korean cities. 1) When the results of the analysis were compared with those of previously analysed temperature increase in 1990s and 1940s, there was an increase in temperature of $1.7^{\circ}C$ in Seoul, $1.5^{\circ}C$ in Gwangju and $0.7^{\circ}C$ in Mokpo. 2) According to the seasonal analysis, $1.7^{\circ}C$ in Seoul, $1.5^{\circ}C$ in Gwangju and $0.7^{\circ}C$ in Mokpo increased in Spring. On a monthly basis in Spring increase in April was highest($2.3^{\circ}C$ and $1.0^{\circ}C$ in Gwangju and Mokpo, respectively). As for Seoul, $2.4^{\circ}C$ increased in March, highest. In July and August of Summer, no significant change occurred in the three cities, but in Autumn, $1.0^{\circ}C,\;1.5^{\circ}C$, and $0.3^{\circ}C$ in Seoul, Gwangju and Mokpo increased, respectively. In Winter, $2.9^{\circ}C$ in Seoul, $1.9^{\circ}C$ in Gwangju, and $2.3^{\circ}C$ in Mokpo increased, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.82-90
• /
• 2013

An Optical Network-on-Chip(ONoC) based on silicon photonics is one of promising technology for next generation exascale computing architectures. Recent active researches on ONoC focus on improving bandwidth further and avoiding path collisions by using wavelength division multiplexing (WDM). However, the number of wavelengths used for the WDM increases linearly as the number of Processing Element (PE) increases in existing ONoCs which adopt centralized routing architecture. The problem will also arises growing cost of optical devices such as light switches and light sources and limits the scalability of ONoC due to the sinal loss caused by interference of distinct light sources. In this paper, we proposes a distributed routing architecture for ONoC which is based on 2D-mesh structure using WDM technique and present a method that minimize the required number of wavelengths exploiting the connectivity of communication. In comparison with existing centralized routing architectures, results show reduction by 56% of the number of wavelengths and 21% of the number of optical switches in $8{\times}8$ networks.

• Electronics and Telecommunications Trends
• /
• v.35 no.6
• /
• pp.97-106
• /
• 2020

This article explains domestic and overseas technology trends as well as an energy trading architecture model that can safely execute energy power trading through blockchain in the community. There is a way to trade energy between homes as well as between homes and the public in the community, but there are currently no institutions that make this possible. However, our aim is to approach these power trading methods collectively through global technology related to blockchain. We try to solve the problems of energy trading using the blockchain technique. We discuss domestic and overseas technology trends in power trading using blockchain and introduce the power trading architecture for the community proposed by ETRI. We propose a framework that supports reliability and interoperability based on blockchain and develop scalable technology capable of supporting not only small-scale electricity trading but also medium-scale power trading.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.493-501
• /
• 2013

Taking into account the increasingly stringent legislation on emissions from marine engines, this work aims to analyze several internal engine modifications to reduce $NO_x$ (nitrogen oxides) and other pollutants. To this end, a numerical model was employed to simulate the operation cycle and characterize the exhaust gas composition. After a preliminary validation process was carried out using experimental data from a four-stroke, medium-speed marine engine, the numerical model was employed to study the influence of several internal modifications, such as water addition from 0 to 100% water to fuel ratios, exhaust gas recirculation from 0 to 100% EGR rates, modification of the overlap timing from 60 to $120^{\circ}$, modification of the intake valve closing from 510 to $570^{\circ}$, and modification of the cooling water temperature from 70 to $90^{\circ}C$. $NO_x$ was reduced by nearly 100%. As expected, it was found that, by lowering the combustion temperature, there is a notable reduction in $NO_x$, but an increase in CO (carbon monoxide), HC (hydrocarbons) and consumption.