• 제목/요약/키워드: NoC architecture

검색결과 195건 처리시간 0.023초

도로변 공원의 공간조성유형에 따른 초미세먼지 분포 특성 - 부산시 송상현광장을 사례로- (Characteristics of Particulate Matter 2.5 by Type of Space of Urban Park - Focusing on the Songsanghyeon Plaza in Busan -)

  • 안로사;홍석환
    • 한국조경학회지
    • /
    • 제49권6호
    • /
    • pp.37-48
    • /
    • 2021
  • 본 연구는 도심 내 주요 초미세먼지(PM2.5) 발생원인 도로 인근에 조성된 도시공원을 대상으로 도시공원 내부 공간조성유형에 따라 PM2.5의 농도변화를 분석하여 특성을 살펴보고자 하였다. 연구대상지는 부산시 진구 도심 내 12차선의 도로 중심부에 광장형 공원형태로 조성된 송상현광장으로 선정하였으며, 공원의 공간조성유형은 토지피복유형과 식생구조에 따라 도로변 광장(A), 선큰광장(B), 도로 경계부 다층식재지(C), 교목 하부(D), 잔디광장(E)으로 총 5가지로 구분하였다. PM2.5는 초미세먼지 등급별 국가예보에 따라 좋음일, 보통일, 나쁨일 3일씩 총 9회 측정한 결과를 바탕으로 평균비교 분석을 수행하였다. PM2.5 좋음일 기준으로 송상현광장 내 공간조성유형별 농도는 D, E < B, C < A 순으로 통계적 유의성이 있었다. PM2.5 보통일과 나쁨일 기준은 D, E < A, B, C 순으로 유의하였다. 공간조성유형별 송상현광장 내 PM2.5 농도 특성은 인근 차도로부터 확산되는 PM2.5의 대기의 흐름의 영향이 큰 것으로 판단되었다. 차도와 15m 거리에 위치해 있는 A와 C의 경우 PM2.5 농도가 높았으나, B는 도로로부터 40m 거리에 떨어져 있는 PM2.5 농도가 높았다. 이는 B는 외벽구조로 둘러싸여 공간 내부의 공기순환이 느려 상대적으로 대기가 확산되지 못하는 것으로 판단되었다. D와 E의 경우 C의 공간조성유형을 통해 대기의 흐름이 차단된 후 공원 내부에서 대기의 흐름이 원활한 구조여서 PM2.5 농도가 상대적으로 낮은 것으로 판단하였다.

대기오염 및 산성비가 서울지역 식물군집에 미치는 영향 (The Effect on the Plant Community Decline by the Air Pollutant & Acid Rain in the Metropolitan Area)

  • 유창희;이경재
    • 한국조경학회지
    • /
    • 제20권1호
    • /
    • pp.80-94
    • /
    • 1992
  • To inspect the changing of the forest soil and plants community structrure by air plooutand & acid rain during from September to November in 1990, the smapling sites were selected in the Piwon, Namsan and Kwangnung forest. In sites, plots were set up in Q. aliena forest at Piwon, Quercus mongolica and Pinus densiflora forest at Namsan and Q. mongolica and Pinus densiflora forest at Kwangnung. To obtain the individual number of trees, number of species, importance values and species diversity, using the Curtis & McIntosh methods. The results are following that; 1) In Pinus densiflora community, it was almost dominated by Q. spp. in the canopy layer and P. densiflora and Carpinus laxiflora through the subtree to shrub layer at Kwangnung. It wassaid that C. laxiflora is the climax species in moddle temperature zone. On the contrary, in Namsan forest, there is no appearance thesamplings of P. densiflora & C. laxiflora, but Styrax japonica and Stephanandra incisa that are acid-tolerance species are dominant ones. On the other hand, in Q. spp. community, Q. spp. and C. laxiflora are dominant ones. On the other hand, in Q. spp. community, Q. spp. and C. laxiflora are dominant species through all layer, and in addition C. cordata somewhat appear at Kwangnung. But at Namsan and Piwon forest, Q. mongolica & Q. aliena that were dominant species in canopy layer disappeared in the subtreeand shrub layer, and C. laxiflora and Corunus cordata absolutely disappeared. It were similarly dominated by Robinia pseudo-acacia, Styrax japonica, Sorbus alnifolia, Acer pseudo-sieboldianum, Rhododendrn mucronulatum and so on at Namsn and Piwon forest. In the light of these facts, it found out that disclimax was similar between Namsan and Piwon forest. 2) Species diversity and maximum species diversity were decreased in Kwangnumg, Namsan, Piwon in order. It was xpected that vegetational community was affected by environmental pollutant. 3) As the vegetational community structure analyses, using DCA technique among the ordination, ecological successional series are stopped to Q. spp. from P. densiflora at Namsan and Piwon, but that of Kwangnung is on the way that P. densiflora, Q. alena, C. laxiflora. It was obvi ously different from Namsan and Piwon. 4) In Q. spp. & P. densiflora community, the number of woody plants inNamsan & Piwon is much less than that of Kwangnung through all Layer. Especially, Piwon shown very severe difference. Through all community, the number of individuals of Piwon and Namsan are less than that of Kwangnung. Specially, that of the shrub layer is obvious. 5) In the growth rate of trees, it found out that all sites showed the growth decline phenomena. Especially, since in 1975, there have been the micro disclimax phenomena in Q. community of Kwangnung. 6) In the Q. community, soil acidity of Namsan & Piwon measured 4.57, 4.40 respectively. It was very strong acidity and far lower than that of Kwangnung. Also the content amount of Mg++ in Namsan & Piwon forest were still lower than Kwangnung.

  • PDF

내음성 지표식물 개발을 위한 애기나리의 생육환경분석 (Analysis on the Growth Environment of Disporum smilacinum A. GRAY for Development of Shade-tolerance Groundcover Plant)

  • 이기철;박슬기
    • 한국조경학회지
    • /
    • 제19권2호
    • /
    • pp.65-74
    • /
    • 1991
  • The purpose of this study was to find the basic application of Disporum genus in landscape-arc-hitectual space. Environment of native site (Daeducksan, Piseulsan) and growth characteristics of experiment plot were investigated and analyzed in this study. The results of this study were as follows; 1. In the case of environment of native site, the relative light intensity was about 10% and distribution of species were primarily north slope. Gradient of Daeducksan and Piseulsan were 10$^{\circ}$, 18$^{\circ}$ Soil textures was Lic both and field capacity of Daeducksan and Piseulsan were 69%, 73.5%. The soil pH of Daeducksan and Piseulsan were 6.1 and 5.8. The both content of organic matter and C.E.C. were high markedly. The P2O5 content of Daeducksan showed high but total nitrogen showed nearly the same level when comparing with the common dry field condition. 2. In tree layer, Daeducksan composed of broadleaved forest of 80% involving Quercus variabilis, and Piseulsan composed of coniferous forest of 80% involving Pinus densiflora on the other hand. Daeducksan, therefore, was more appearance species than Piseulsan in herbaceous layer. 3. Result in ANOVA Test, significance followed with light intensity was recognized in plant height, leaf width, leaf length, leaf thick and No. of leaf, while in the case of soil was not. Plant height was longest in 1% and leaf width, leaf length was largest in 25%. Therefore ornamental value of leaf was the very best in 25%. 4. Result in correlation coefficient analysis, plant height was correlated leaf width, leaf length. The longer plant height, the smaller leaf width, leaf length. In relative light intensity of 1%, flower was hardly expected because of the more shade, the less flower. Disporum smilacinum is expected great use as ground covers in the shades of tall-building or hdavy woods.

  • PDF

조선 해양 구조물용 강재의 소성 및 파단 특성 V: 온도 의존성을 고려한 변형률 속도에 관한 실험적 연구 (Plasticity and Fracture Behaviors of Marine Structural Steel, Part V: Effects of Strain Rate and Temperature)

  • 정준모;임성우;김경수
    • 한국해양공학회지
    • /
    • 제25권3호
    • /
    • pp.73-84
    • /
    • 2011
  • This is the fifth in a series of companion papers dealing with the dynamic hardening properties of various marine structural steels at intermediate strain rates. Five steps of strain rate levels (0.001, 1, 10, 100, 200/s) and three steps of temperature levels (LT ($-40^{\circ}C$), RT, and HT ($200^{\circ}C$)) were taken into account for the dynamic tensile tests of three types of marine structural steels: API 2W50 and Classifications EH36 and DH36. The total number of specimens was 180 pieces. It was seen that the effects of dynamic hardening became clearer at LT than at RT. Dynamic strain aging accompanying serrated flow stress curves was also observed from high temperature tests for all kinds of steels. The dynamic hardening factors (DHFs) at the two temperature levels of LT and RT were derived at the three plastic strain levels of 0.05, 0.10, 0.15 from dynamic tensile tests. Meanwhile, no DHFs were found for the high temperature tests because a slight negative strain rate dependency due to dynamic strain aging had occurred. A new formulation to determine material constant D in a Cowper-Symonds constitutive equation is provided as a function of the plastic strain rate, as well as the plastic strain level. The proposed formula is verified by comparing with test flow stress curves, not only at intermediate strain rate ranges but also at high strain rate ranges.

비부착 강연선에 대한 포스트텐션 정착구 개발 및 성능 시험 (Development and Performance Test for Unbonded Post-Tensioned Anchor)

  • 조아서;조영욱;전병갑;강현구
    • 콘크리트학회논문집
    • /
    • 제27권1호
    • /
    • pp.11-20
    • /
    • 2015
  • 본 연구에서는 유한요소해석을 통하여 직경 15.2 mm의 비부착식 강연선을 위한 포스트텐션 1구 정착구를 개발하였고 이에 대한 성능시험을 수행하였다. 정착장치에 대한 성능시험으로 콘크리트 표준시방서에 따라 KCI-PS101에 제시된 정하중시험과 하중전달시험 방법이 사용되었다. 정하중시험과 강연선 인장시험을 통하여 개발된 정착구가 강연선 공칭인장강도에도 손상 및 파괴되지 않음을 확인하였다. 하중전달시험을 통해서는 각종 철근보강에 따른 실험체의 압축성능을 확인하였고, 무보강 실험체가 강연선 인장강도의 1.64배까지 저항할 수 있다는 결과를 얻었다.

H.264 비디오 코덱을 위한 고속 움직임 예측기의 하드웨어 구조 (A New Hardware Architecture of High-Speed Motion Estimator for H.264 Video CODEC)

  • 임정훈;서영호;최현준;김동욱
    • 방송공학회논문지
    • /
    • 제16권2호
    • /
    • pp.293-304
    • /
    • 2011
  • 본 논문에서는 H.264/AVC 인코더에서 가장 많은 연산 시간이 소요되는 움직임 추정(motion estimation, ME) 동작을 위한 하드웨어의 구조를 제안하고 IP(intellectual property) 형태로 구현하였다. 고속 움직임 추정기의 구조는 버퍼(buffer), PU 어레이(processing unit array), SAD 선택기(SAD selector), MV 생성기(motion vector generator) 등으로 구성되어 있다. PU 어레이는 16개의 PU로 구성되어 있고, 각각의 PU는 16개의 PE(processing element)로 이루어져 있다. 제안한 하드웨어의 동작적인 특징은 외부메모리 접근량을 줄이기 위해 현재와 참조프레임의 데이터를 재사용한다는 것과 SAD연산을 수행할 때 클록의 손실 없이 계산을 할 수 있다는 것이다. 구현한 고속 움직임 추정기는 Altera 사의 FPGA인 StatixIII EP3SE80F1152C2에서 3%의 자원을 사용하였고, 최대 동작주파수는 446.43MHz이었다. 따라서 구현한 하드웨어는 1080p 영상을 최대 50fps로 처리할 수 있다.

알칼리 활성 슬래그의 열역학적 수화모델링에 대한 황산염의 영향 (Influence of Sulfate on Thermodynamic Modeling of Hydration of Alkali Activated Slag)

  • 이효경;박솔뫼;김형기
    • 자원리싸이클링
    • /
    • 제28권1호
    • /
    • pp.32-39
    • /
    • 2019
  • 본 연구에서는 석고의 형태로 황산염이 혼입된 알칼리 활성 슬래그의 수화반응에 대해, 깁스 최소화 에너지 개념을 이용한 반응계산 결과가 계산 조건에 따라 어떻게 달라지는지에 대해 확인하였다. 계산을 위한 변수로는 황화물의 고려 여부, AFt/AFm 상의 생성가능성 여부, 대기 중 산소의 반응기여 여부 등을 검토하였다. 계산결과, 실제 위의 다양한 조건의 변화에도 불구하고 공극량, 화학수축과 같이 이후 배합의 성능에 영향을 미칠 수 있을 만한 값 들은 크게 차이가 발생하지 않았는데, 이 변수들에 의한 변화폭은 물결합재비에 의한 변화폭에 비해 월등히 작은 값이었다. 생성되는 물질들의 종류 및 양은 일부 초기조건 설정에 따라 변화할 수 있으나, 가장 주요한 수화물인 C-(N-)A-S-H의 생성량에는 별다른 영향을 미치지 않았다.

Transient response of rhombic laminates

  • Anish, Anish;Chaubey, Abhay K.;Vishwakarma, Satyam;Kumar, Ajay;Fic, Stanislaw;Barnat-Hunek, Danuta
    • Structural Engineering and Mechanics
    • /
    • 제70권5호
    • /
    • pp.551-562
    • /
    • 2019
  • In the present study, a suitable mathematical model considering parabolic transverse shear strains for dynamic analysis of laminated composite skew plates under different types of impulse and spatial loads was presented for the first time. The proposed mathematical model satisfies zero transverse shear strain at the top and bottom of the plate. On the basis of the cubic variation of thickness coordinate in in-plane displacement fields of the present mathematical model, a 2D finite element (FE) model was developed including skew transformations in the mathematical model. No shear correction factor is required in the present formulation and damping effect was also incorporated. This is the first FE implementation considering a cubic variation of thickness coordinate in in-plane displacement fields including skew transformations to solve the forced vibration problem of composite skew plates. The effect of transverse shear and rotary inertia was incorporated in the present model. The Newmark-${\beta}$ scheme was adapted to perform time integration from step to step. The $C^0$ FE formulation was implemented to overcome the problem of $C^1$ continuity associated with the cubic variation of thickness coordinate in in-plane displacement fields. The numerical studies showed that the present 2D FE model predicts the result close to the analytical results. Many new results varying different parameter such as skew angles, boundary conditions, etc. were presented.

60톤 크레인의 주행 진동 실험을 통한 인접 석조 문화재의 안정성 평가 (Vibration testing using the movement of a 60ton crane for the evaluation the stability of nearby stone cultural heritage.)

  • 이가윤;라영은;이종학;이성민;이기학
    • 한국공간구조학회논문집
    • /
    • 제24권1호
    • /
    • pp.47-55
    • /
    • 2024
  • The aim of this study is to evaluate the possibility of damage to cultural assets resulting from vibrations generated by construction vehicle traffic. The cultural heritage's natural vibration frequency was determined to be 150Hz by measurement. The damping ratios were calculated as 4.7% using the logarithmic decrement approach and 4.3% using the half-power method. The vibration measurements obtained during vehicle operation indicated that, despite an increase in vehicle velocity of up to 15 km/h, the vibrations remained below the detectable level of 0.13 mm/sec. When the road is curved and the terrain is sloped, a suitable speed for vehicle operation was found to be around 17 km/h, at which point vibrations were seen. The highest recorded vibration amplitude at this velocity was 0.217 mm/sec, which remains below the stringent regulation limit of 2 mm/sec. Thus, it can be concluded that there is no actual harm caused by vibrations.

상승된 이산화탄소와 온도 그리고 한발 영향에 따른 감자의 군락 형태와 무기영양 변화 (Impact of Elevated Carbon Dioxide, Temperature, and Drought on Potato Canopy Architecture and Change in Macronutrients)

  • 이윤호;조현숙;김준환;상완규;신평;백재경;서명철
    • 한국작물학회지
    • /
    • 제63권2호
    • /
    • pp.164-173
    • /
    • 2018
  • 본 연구는 옥외환경조절 시설인 SPAR챔버에서 향후 기후변화가 지속 될 경우 상승된 이산화탄소와 온도 그리고 한발에 따른 감자의 군락 형태와 무기영양 변화에 대한 결과는 다음과 같다. 1. AT+2.8C700는 상승된 $CO_2$와 고온에 의하여 초장과 엽면적 그리고 건물중이 상당히 증가 하였고, AT+2.8C700DS는 한발의 영향으로 상당히 감소하였다. 2. 수확기에서 잎은 AT+2.8C700은 ATC450에 비하여 질소와 인산이 감소한 반면 칼륨, 칼슘 그리고 마그네슘 농도가 증가하였다. 괴경은 질소, 인산 그리고 칼륨이 감소하였으며, 칼슘과 마그네슘은 변화가 없었다. 반면, AT+2.8C700DS는 한발의 영향으로 무기영양 농도가 상대적으로 다른 처리비하여 낮았지만, 마그네슘 농도만 증가하였다. 3. $CO_2$와 온도 상승을 보면 AT+2.8C700는 ATC450에 비하여 질소 농도의 감소로 26% 단백질 함량이 감소를 하였다. 한발을 받은 AT+2.8C700DS보다 AT+2.8C700는 단백질 함량이 20%가 감소 하였다. 4. 따라서 상승된 $CO_2$ 농도와 한발은 무기영양의 변화뿐만 아니라 광합성 관련된 당과 아미노산 같은 2차 대사물질도 변화와 인간의 단백질 섭취에도 영향을 줄 것이다.