• Korean Business Review
• /
• v.19 no.2
• /
• pp.69-94
• /
• 2006

Landfill gas is a mixture of methane and carbon dioxide produced by the bacterial decomposition of organic wastes, and it is considered to produce bad smells and pollute the environment. Economic trials and the developments of landfill gas, as an alternative energy resource, become known at the recent years. Resource development of landfill gas, which is managed by Korea up to now, is for the most part generation using gas engine. Medium BTU and High BTU are considered for the power generation as well. I\10st income of generation using gas engine is selling charge through a power plant. Expecting to manage the power plant for up to 10 years, the analysis based on revenue and expenditure shows when the unit price is 65.2 Won and the operating rate reaches 90%, it is possible to be into the black in 2012 without considering additional financial expense. It was also analyzed that the profit at a unit price of 85 Won under the anticipated rising unit price by the operating rate of 71% is larger than at the operating rate of 90% under limited unit price of 65.2 Won. It means to manage the power plant at a unit price of 65.2 Won and the operating rate must be higher than 90% for economic logicality. If we assume that the operating rate is 90% and it increases the unit price, the unit price must be higher than 85 Won for the management of a power plant. Analysis of changing a unit price, however, might be expected to have a gradual rise of prices. If there is no price rising and additional income related to CDM(Clean Development Mechanism) and emission trading upon Kyoto protocol, the management of a power plant using gas engine will get financial difficulties because of many operating expenses. However, since landfill gas is considered as a worthy energy resource for the guarantee of sustainable development and for the equity between recent generation and future generation, the development of it must be accomplished by the government's additional supporting and efforts under the interest of all stakeholder who are involved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1123-1129
• /
• 2015

A pair of two-way valves typically is used in automotive washing machines, where the water flow direction is frequently reversed and highly pressurized clean water is sprayed to remove the oil and dirt remaining on machined engine and transmission blocks. Although this valve system has been widely used because of its competitive price, its application is sometimes restricted by surging effects, such as pressure ripples occurring in rapid changes in water flow caused by inaccurate valve control. As an alternative, one three-way reversing valve can replace the valve system because it provides rapid and accurate changes to the water flow direction without any precise control device. However, a cavitation effect occurs because of the complicated bottom plug shape of the valve. In this study, the cavitation index and percent of cavitation (POC) were introduced to numerically evaluate fluid flows via computational fluid dynamics (CFD) analysis. To reduce the cavitation effect generated by the bottom plug, the optimal shape design was carried out through a parametric study, in which a simple computer-aided engineering (CAE) model was applied to avoid time-consuming CFD analysis and difficulties in achieving convergence. The optimal shape design process using full factorial design of experiments (DOEs) and an artificial neural network meta-model yielded the optimal waist and tail length of the bottom plug with a POC value of less than 30%, which meets the requirement of no cavitation occurrence. The optimal waist length, tail length and POC value were found to 6.42 mm, 6.96 mm and 27%, respectively.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1435-1443
• /
• 2016

This study evaluated the sanitary state of seawater and shellfish in Yeoja bay from January 2014 to June 2016. The sampling stations for sanitary survey in Yeoja Bay was composed of 50 stations for seawater and 4 stations for ark shell and the samples have been collected monthly at a stated date. The total and fecal coliforms in seawater and Escherichia coli (E. coli) in shellfish were investigated as sanitary indicator bacteria, respectively. The geometric mean and the estimated 90th percentile ranges of total and fecal coliforms for seawater were <1.8-3.9, <1.8-2.6 and <1.8-29.7, <1.8-9.3 MPN/100 mL, respectively. The range of E. coli levels for ark shell were <20~330 MPN/100 g. The sanitary state in Yeoja bay was evaluated clean area according Korea criteria and conditionally approved area according US criteria and Class B area according EU criteria.

• Korean Journal of Community Nutrition
• /
• v.24 no.6
• /
• pp.497-511
• /
• 2019

Objectives: This study aimed to develop a school-centered healthy eating environment for children in elementary care classrooms and prevent incorrect eating habits and obesity through the development and application of standardized healthy eating habit-forming educational materials. Methods: Ten schools in eight districts of Gyeonggi-do and 400 students from 19 care classes were selected. Based on the developed educational materials, the program was applied to students once in two weeks. 'Notices for Parents' forms were also sent to the students' home to educate their parents. Pre and post-surveys were conducted to evaluate the effectiveness of the education. The pre-education, education, and aftercare were conducted from September 28 to September 31, 2016, from October 3 to November 30, 2016, and from December 5 to December 9, 2016, respectively. Results: The healthy eating program for elementary care classes was designed to develop a school-centered healthy eating environment and provide standardized educational material for healthy eating habits. Twelve educational topics were developed: , , , , , , , , , , , and . Moreover, the materials were produced in four forms: for students, for after school caring teachers, for external specialists, and for parents. The effectiveness evaluation was conducted to confirm the application of the program. The average eating habits score was 3.3 ± 0.6, with no significant difference between before and after application. The score of overall satisfaction of the education was 3.9 ± 0.9. The most satisfying content was 'Did you get to know how to eat evenly?'. Significant increases were observed in two contents for parents regarding their children's knowledge changes after the education: 'Five nutrients needed for growing children' and 'Knowing sugar foods and sugar-containing foods'. On the other hand, their educational satisfaction was 3.6 ± 0.6, which was lower than the children's satisfaction. This might be because their education was conducted only through the 'Notices for Parents' form. Conclusions: In the long term, the healthy eating habit-formation education for lower elementary school children is expected to be beneficial. To prevent obesity and establish healthy eating habits of children, it is important to develop healthy eating education programs centered on elementary school aftercare classes, including the development of educational materials and an application system through connection with the home and community.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.605-614
• /
• 2020

This study was conducted to compare the growth performances of three groups of commercial Korean native chickens (KNCs) including two strains of crossbreeds and H3 (Hanhyeop 3) from hatch to twelve weeks of age. (1A, 2A, and H3). A total of 468 one-day-old chicks were allocated in a completely randomized design with 15 replicates per treatment for the crossbreeds and 9 replicates per treatment for H3 (12 birds per cage). Commercial broiler diets (i.e., Week 0 - 5 crude protein [CP] 22.0%, metabolizable energy [ME] 3,025 kcal·kg^-1; week 5 - 8 CP 20.0%, ME 3,100 kcal·kg^-1; week 8 - 12 CP 19.0%, ME 3,150 kcal·kg^-1) were provided according to the Korean Feeding Standard for Poultry on an ad-libitum basis with fresh clean water during the twelve-week period. Body weight gain and shank length (SL) were measured weekly until week 6 and bi-weekly during week 6 to 12. Compared to H3, the two crossbreed groups had a higher body weight (BW) on weeks 3 to 8; however, the bodyweight of H3 on week 10 was significantly higher than the other groups (p < 0.05). Moreover, the average daily feed intake (ADFI) of H3 was higher than that of the two crossbreed groups from hatching to 84 days except for week 3, and H3 showed a lower average daily gain (ADG) on weeks 3 and 10 (p < 0.05). Furthermore, H3 had a higher feed conversion ratio compared to another crossbreed chicken on weeks 1 to 8 and the last week after hatching. Among all the groups, there was no significant difference for shank length during the experimental period.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.218-223
• /
• 2010

The zinc oxide thin film, which can be applied as the gas sensor of a semiconductor type, was grown on the silicon substrate by CFR(continuous flow reaction) method in this study. The growth property and the electrical property of the zinc oxide thin films synthesized by CFR method were also investigated. Zinc acetate solutions of 0.005~0.02 M were used as the precursor for the preparation of zinc oxide thin films. The size of ZnO particles consisted on the zinc oxide thin film increased not only with increasing concentration of precursor, but also the thickness of thin film increased. The growth rate of zinc oxide thin film by CFR method was proportionably depend on the concentration of precursor and the uniform ZnO thin film was prepared when zinc acetate of 0.01 M is used as the precursor. The charged currents on the zinc oxide thin films were obtained as its electrical property by I-V meter, and increased agree with increasing the thickness of zinc oxide thin film. Thus, it was concluded that the charged current on the zinc oxide thin film can be controlled with changing concentration of precursor solution in CFR method. The charged currents on the zinc oxide thin films also decreased when ZnO thin film is exposed under hydrogen sulfide of 500 ppmv at $300^{\circ}C$ for 5 min. From these results, it could be confirmed that the zinc oxide thin film prepared by CFR method can be used for the detection of sulfur compounds.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.71-78
• /
• 2012

Eupatilin, one of representative medical components of mugwort, can be efficiently extracted from the 'Gangwha Sajabalssuk'. The Eupatilin content may depend on environmental factors such as soil and regional climate in addition to a genetic factor and Gangwha region has a profitable environmental condition for the mugwort growth. In this study, the climatological characteristics of Gangwha was analyzed in order to find the environmental condition of mugwort containing high Eupatilin in term of atmospheric, oceanographic and land variables. The climate of Gangwha is characterized by the relatively low daily temperature and large diurnal variation with plenty of solar radiation, long sunshine duration and less cloudiness. According to our correlation analysis, the long sunshine duration and the large diurnal temperature variation are highly correlated with the Eupatilin contents. The result implies that Gangwha has the favorable conditions for the cultivation and the habitat of the high-Eupatilin concentrated mugwort. Because of the sea surrounding Gangwha Island with low salinity and moderate wind, the salt contained in sea breeze is relatively low compared to other regions. Furthermore, Gangwha has clean atmospheric environment compared to other regions because the concentrations of toxic gases harmful to crop growth such as nitrogen dioxide ($NO_2$), sulfite gas ($SO_2$) and fine dust (PM-10) are lower in the air. The ozone ($O_3$) concentration is moderate and within the level of natural production. It is also found that moderately coarse texture or fine loamy soils known as good for water drainage and for the growth and cultivation of the 'Gangwha-mugwort' are distributed throughout the areas around mountainous districts in Gangwha, coinciding with those of mugwort habitat.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.327-336
• /
• 2007

The 3D building modeling is one of crucial components in building 3D geospatial information. The existing methods for 3D building modeling depend mainly on manual photogrammetric processes by stereoplotter compiler, which indeed take great amount of time and efforts. In addition, some automatic methods that were proposed in research papers and experimental trials have limitations of describing the details of buildings with lack of geometric accuracy. It is essential in automatic fashion that the boundary and shape of buildings should be drawn effortlessly by a sophisticated algorithm. In recent years, airborne LiDAR data representing earth surface in 3D has been utilized in many different fields. However, it is still in technical difficulties for clean and correct boundary extraction without human intervention. The usage of airborne LiDAR data will be much feasible to reconstruct the roof tops of buildings whose boundary lines could be taken out from existing digital maps. The paper proposed a method to reconstruct the roof tops of buildings using airborne LiDAR data with building boundary lines from digital map. The primary process is to perform octree-based segmentation to airborne LiDAR data recursively in 3D space till there are no more airborne LiDAR points to be segmented. Once the octree-based segmentation has been completed, each segmented patch is thereafter merged based on geometric spatial characteristics. The experimental results showed that the proposed method were capable of extracting various building roof components such as plane, gable, polyhedric and curved surface.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.487-510
• /
• 2019

The purpose of this study is to examine the impact of Ethical Leadership on job engagement, organizational commitment and unethical pro-organizational behavior and to analyze the dual mediation effect of job engagement and organizational commitment. We used 565 questionnaires collected by members in domestic companies. The result of the analyses are as follows: First, Ethical Leadership has no positive effect on unethical pro-organizational behavior. Second, in the relationship between Ethical Leadership and unethical pro-organizational behavior, job engagement does not play a mediating role, but organizational commitment plays a mediating role. Third, in the relationship between Ethical Leadership and unethical pro-organizational behavior, job engagement and organizational commitment play a dual mediating role. The theoretical implication is that this study once again confirmed the behavior patterns such as cognition, emotion, attitude and behavior of members in the organization. In addition, this study can contribute to theoretical expansion by explaining that these behavior patterns are identified by social exchange theory. The practical implication is that this study confirmed that members in the actual management field are willing to perform unethical pro-organizational behavior in order to achieve the organization's goal efficiently and effectively. Therefore, it is suggested that active efforts should be made to recognize these negative influences and possibilities at the organization level and to create a clean and fair organizational culture and environment that everyone can recognize at the social level.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.621-628
• /
• 2021

Prior studies on frequency-related image quality analysis of intravascular ultrasound catheters are lacking both in Korea and abroad. Therefore, this study was conducted to prepare a standard for measuring the image quality using the program and to suggest a measuring method to researchers related to the quality analysis of intravascular ultrasound images. For the target, the vessel lumen size is 3.0 - 4.0 mm. Before using intravascular ultrasound, thoroughly clean the ultrasound catheter so that no air or foreign substances enter it. Normal vascular images and lesion vascular images of sufficiently dilated images were used. As a standard image acquisition method, the image of the end-systolic section, which has the best evaluation of vascular lesions when using intravascular ultrasound, was acquired retrospectively through the DCAS PACS program to set the standard. When setting the measurement method criteria, we proposed a standard setting method that corresponds to the concentric and eccentric circles of normal and lesion vessels. By applying this criterion, we proposed a method for measuring the lumen and lateral cavities of normal and lesion vessels of interest and background area. In conclusion, if the image quality of intravascular ultrasonography is measured through the method devised by these researchers, consistent quality measurement is possible regardless of the type of intravascular ultrasound catheter. Therefore, it is thought that it can be applied as a guideline for the actual image quality measurement method in the study related to intravascular ultrasound image quality.