• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.52-58
• /
• 2010

Bulk nanostructured metallic materials are generally synthesized by bottom-up processing which starts from powders for assembling bulk materials. In this study, the bottom-up powder metallurgy and High Pressure Torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. After the HPT process at 473K, the disk samples reached a steady state condition when the microstructure and properties no longer evolve, and equilibrium boundaries with high angle grain boundaries (HAGBs) were dominant. The well dispersed alumina particles played important role of obstacles to dislocation glide and to grain growth, and thus, reduced the grain size at elevated temperature. The small grain size with HAGBs resulted in high strength and good ductility.

• Phonetics and Speech Sciences
• /
• v.10 no.1
• /
• pp.23-31
• /
• 2018

In this study, we examined how the upper and lower lips articulate to produce labial /p/. Using electromagnetic midsagittal articulography, we collected flesh-point tracking movement data from eight native speakers of Seoul Korean (five females and three males). Individual articulatory movements in /p/ were examined in terms of minimum vertical upper lip position, maximum vertical lower lip position, and corresponding vertical upper lip position aligned with maximum vertical lower lip position. Using linear mixed-effect models, we tested two factors (word boundary [across-word vs. within-word] and speech rate [comfortable vs. fast]) and their interaction, considering subjects as random effects. The results are summarized as follows. First, maximum lower lip position varied with different word boundaries and speech rates, but no interaction was detected. In particular, maximum lower lip position was lower (e.g., less constricted or more reduced) in fast rate condition and across-word boundary condition. Second, minimum lower lip position, as well as lower lip position, measured at the time of maximum lower lip position only varied with different word boundaries, showing that they were consistently lower in across-word condition. We provide further empirical evidence of lower lip movement sensitive to both different word boundaries (e.g., linguistic factor) and speech rates (e.g., paralinguistic factor); this supports the traditional idea that the lower lip is an actively moving articulator. The sensitivity of upper lip movement is also observed with different word boundaries; this counters the traditional idea that the upper lip is the target area, which presupposes immobility. Taken together, the lip aperture gesture is a good indicator that takes into account upper and lower lip vertical movements, compared to the traditional approach that distinguishes a movable articulator from target place. Respective of different speech rates, the results of the present study patterned with cross-linguistic lenition-related allophonic variation, which is known to be more sensitive to fast rate.

• Korean Journal of Materials Research
• /
• v.26 no.12
• /
• pp.714-720
• /
• 2016

We performed this study to understand the effect of a single-crystalline anode on the mechanical properties of as-deposited films during electrochemical deposition. We used a (111) single- crystalline Cu plate as an anode, and Si substrates with Cr/Au conductive seed layers were prepared for the cathode. Electrodeposition was performed with a standard 3-electrode system in copper sulfate electrolyte. Interestingly, the grain boundaries of the as-deposited Cu thin films using single-crystalline Cu anode were not distinct; this is in contrast to the easily recognizable grain boundaries of the Cu thin films that were formed using a poly-crystalline Cu anode. Tensile testing was performed to obtain the mechanical properties of the Cu thin films. Ultimate tensile strength and elongation to failure of the Cu thin films fabricated using the (111) single-crystalline Cu anode were found to have increased by approximately 52 % and 37 %, respectively, compared with those values of the Cu thin films fabricated using apoly-crystalline Cu anode. We applied ultrasonic irradiation during electrodeposition to disturb the uniform stream; we then observed no single-crystalline anode effect. Consequently, it is presumed that the single-crystalline Cu anode can induce a directional/uniform stream of ions in the electrolyte that can create films with smeared grain boundaries, which boundaries strongly affect the mechanical properties of the electrodeposited Cu films.

• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.119-132
• /
• 1992

This paper aims to investigate the effect of B and Si upon the mechanical properties, microstructure and corrosion resistance of Co-Cr base alloy. Ten groups of alloy ingot ingot with various contents of B and Si were remelted by high frequency electrical induction furnace and cast into tensile specimen of ADA Specification No. 14 Tensile and hardness test were carried out by Amsler and Rockwell hardness tester(R-30N), respectively. The microstructures of specimen were observed by SEM. The results obtained are summarized as follows : 1. As B content is increased, tensile strength, yield strength and Rockwell hardness number(R-30N) are also increased significantly, while the elongation is decreased significantly. 2. As Si contect os increased, no significant chang in tensile strength is noticed, yield strength is slightly decreased, but Rockwell hardness number(R-30N) is moderately in creased, Elongation marks maxium value with 1% Si content while with more than 1% Si it is decreased. 3. As B content is increased corrosion resistance is decreased and is at best with 1.5% B content. Corrosion resistance is increased with the increase of Si content and the alloys with Si over 3.0% showed corrosion resistance. 4. As B content increased, precipitates are increased in number at grain boundaries. The grain size tends to become coarse with the increase of Si content. 5. Co rich-Cr alloy is present through matrix whereas at the grain boundaries Cr base precipitates are primarily formed.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.64.1-64.1
• /
• 2015

In the present study, we examine the dependence of solar proton peak flux at SOHO and STEREO on 3-D CME parameters (radial speed, angular width, and longitudinal angular separation between its source region and the magnetic footpoints of spacecraft). For this we consider 38 proton enhancements of 16 SEP events observed by SOHO, STEREO-A, and/or B from 2010 August to 2013 June. As a result, we find that the enhancements are strongly dependent on these three parameters. The correlation coefficient between proton peak flux and CME speed is about 0.42 for the cases the footpoints are located inside the lateral boundaries of angular widths, while there is no correlation for the events outside the boundaries. The correlation coefficient between peak flux and angular separation is -0.51. We find that most of strong proton events occur when their angular separations are closer to zero, supporting that most of the proton fluxes are generated near the CME noses rather than their flanks.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.10
• /
• pp.19-24
• /
• 1995

The majority of problems to which FDTD is being applied involve open structure which require the appropriate scheme to terminate the computational domain. In particular, for the propagation problem of the outgoing waves, a certain type of boundary condition needs to be applied on outer boundaries of the computational domain to generate no reflected waves. In this paper, a new simple technique is presented, which allows the reduced computation time and excellent absorbing characteristics for normal and oblique incident waves on outer boundaries. To illustrate the validity of this method, a numerical calculation for monopole antenna is carried out and the results are compared to measured data. The time-domain properties for circular patch antennas are investicated.

• Structural Engineering and Mechanics
• /
• v.41 no.5
• /
• pp.591-604
• /
• 2012

This paper provides an iteration approach for the solution of multiple notch problem, which is based on the complex variable boundary integral equation (CVBIE). The contours of notches are applied by some loadings. The source points are assumed on the boundary of individual notch and the displacements along the boundaries become unknowns to be investigated. After discretization of the BIE, many influence matrices are obtained. One does not need to assemble many influence matrices into a larger matrix. This will considerably reduce the work in the program. The displacements along the many boundaries can be obtained from an iteration. There is no limitation for the configuration of notches. Several numerical examples are provided to prove the efficiency of the suggested approach.

• Korean Journal of Crystallography
• /
• v.16 no.2
• /
• pp.141-148
• /
• 2005

It is well known that the general metals have a lot of grain boundaries. The grain boundaries play a negative role to increase the resistivity and to decrease the conductivity. The small resistivity and the large conductivity have been a goal of the material scientists, and no signal noise, perfect signal transfer, and the realization of the real sound are the dream of electronic engineers and audio manias. Generally, oxygen free copper (OFC) and Ohno continuous casting (OCC) copper cables have been used for the purpose of the precise signal transfer and low noise. However they still include a lot of grain boundaries. In our study, we have grown the single crystal by the Czochralski method and succeeded to produce single crystal wires from the crystal in the dimension of $0.5{\times}0.5{\times}2500mm$. The produced wire still possesses very good single crystal properties. We observed the structure of the wire, and measured the resistance and impedance. Glow Discharge Spectrometer (GDS) was used for analyzing the compositions of copper single crystals and commercial copper. Current-Voltage curve, resistance, total harmonic distortion and speaker frequency response were measured for comparing electrical and acoustic properties of two samples.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1824-1832
• /
• 1992

This study investigated the compressive Young's modulus and the impactinduced damage of CFRP angle-ply laminate under same impact energy condition. The specimens of angle-ply laminate composites [0.deg.$_{6}$/ .theta..deg.$_{10}$/ 0.deg.$_{6}$] with .theta..deg. =30.deg., 45.deg., 60.deg. and 90.deg. were employed, and damaged by steel balls of diameter of 5mm and 10mm propelled by air gun type impact testing machine. The impact damaged zones were observed through a scanning acoustic microscope(SAM), and their cross-sections were observed through a scanning electron microscope(SEM). The compressive Young's moduli before and after impact were measured, and compared with the theoretical values calculated. The results obtained were as follows: (1) The damage areas on the interfacial boundaries showed more severe change on the back side interface than on the impact side interface with increasing ply-angle. (2) The damage areas on the interfacial boundaries became larger with increasing impact velocity or ply-angle. (3) The impact damaged zone showed the delamination on the interfacial boundaries and transverse cracks inside laminas. (4) The impact damaged zone was affected by the impactor size and speed or ply-angle under same impact energy condition. (5) Compressive Young's moduli before and after impact were lower than theoretical value, but showed a similar change according to ply-angle. (6) Compressive Young's moduli after impact were higher than those before impact, but there was no remarkable change in apparent compressive modulus after impact.t.act.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.13-19
• /
• 2000

The blind segmentation method, which segments input speech data into recognition unit without any prior knowledge, plays an important role in continuous speech recognition system and corpus generation. As no prior knowledge is required, this method is rather simple to implement, but in general, it suffers from bad performance when compared to the knowledge-based segmentation method. In this paper, we introduce a method to improve the performance of a blind segmentation of Korean continuous speech by postprocessing the segment boundaries obtained from the blind segmentation. In the preprocessing stage, the candidate boundaries are extracted by a clustering technique based on the GLR(generalized likelihood ratio) distance measure. In the postprocessing stage, the final phoneme boundaries are selected from the candidates by utilizing a simple a priori knowledge on the syllabic structure of Korean, i.e., the maximum number of phonemes between any consecutive nuclei is limited. The experimental result was rather promising : the proposed method yields 25% reduction of insertion error rate compared that of the blind segmentation alone.