• 한국환경농학회지
• /
• 제27권4호
• /
• pp.362-367
• /
• 2008

The legume-rhizobia symbiosis is an important source of plant growth and nitrogen fixation for many agricultural systems. This study was conducted to investigate the effects of salinity stress on nitrogen fixation and growth of pea (Pisum sativum L.), which has antimutagenic activities against chemical mutagen, inoculated with R. leguminosarum bv. viciae cultured with additional plant-to-rhizobia signal compounds, naringenin (NA,15 uM), methyl-jasmonate (MJ, 50 uM) or both, under greenhouse conditions. Three salinity levels (0.6, 3.0 and $6.0\;dS\;m^{-1}$) were imposed at 3 days after transplanting and maintained through daily irrigations. Addition of signal compounds under non-stress and stress conditions increased dry weight, nodule numbers, leaf area and leaf greenness. The inducers increased photosynthetic rate under non-stress and stress conditions, by approximately 5-20% when compared to that of the non-induced control treatment. Under stress conditions, proline content was less in plants treated with plant-to-bacteria signals than the control, but phenol content was significantly increased, compared to that of the control. The study suggested that pre-incubation of bacterial cells with plant-to-bacteria signals could enhance pea growth, photosynthesis, nitrogen fixation and biomass under salinity stress conditions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권1호
• /
• pp.22-27
• /
• 2004

It is important to mechanical properties of dielectric paper and cable to optimum electrical insulation design of HTS cable, because the cable has experience of mechanical stress, such as tensile stress, bending stress. Also, it is operated at cryogenic temperature. From the results, it was observed that the tensile strength of PPLP in liquid nitrogen was high more than that of air, but tensile strain decrease sharply. According as tensile strength increases, the breakdown stress of PPLP in liquid nitrogen is decreased. Because PPLP was deteriorated by microcrack and tensile strain. According as bending radius multiple is decrease, the ac and impulse breakdown stress of mini-model cable is sharply decreased.

• 한국초지조사료학회지
• /
• 제13권2호
• /
• pp.112-121
• /
• 1993

To study management practices suitable for the least production loss of temperate pasture under summer stress, two different cutting dates (late June and mid July) under summer stress and five different nitrogen treatment application levels (0, 100. 200, 300 and 400 kg/ha) were tried during the trial period between Oct. of 1986 and Oct. of 1989. The late June cutting showed a statistically significant increase of dry matter yield of pasture in comparison with the mid-July cutting(P<0.05). Nitrogen application also gave significant increase in dry matter yield. Botanical composition at the 4th cuttings in 1988 and 1989 was dominated by weeds to the level of 50%, Application ofnitrogen at 200 kgs per ha was found to be the best with production of grasses at 70%, legumes at 10 % and weeds at 20% in botanical composition comparison of pastures at the 4th cutting time the last year, showing a great decrease of weeds. K contents of pasture in June cuttings showed to be more than them in July cutting, and N and Na contents increased with increases of the nitrogen application level. It was concluded that treatment with June cutting and nitrogen application of 200 kg per ha was a way to keep temperate pasture from summer stress in the Cheju area.

• 한국재료학회지
• /
• 제31권12호
• /
• pp.697-703
• /
• 2021

Aluminum nitride having a dense hexagonal structure is used as a high-temperature material because of its excellent heat resistance and high mechanical strength; its excellent piezoelectric properties are also attracting attention. The structure and residual stress of AlN thin films formed on glass substrate using TFT sputtering system are examined by XRD. The deposition conditions are nitrogen gas pressures of 1 × 10^-2, 6 × 10^-3, and 3 × 10^-3, substrate temperature of 523 K, and sputtering time of 120 min. The structure of the AlN thin film is columnar, having a c-axis, i.e., a <00·1> orientation, which is the normal direction of the glass substrate. An X-ray stress measurement method for crystalline thin films with orientation properties such as columnar structure is proposed and applied to the residual stress measurement of AlN thin films with orientation <00·1>. Strength of diffraction lines other than 00·2 diffraction is very weak. As a result of stress measurement using AlN powder sample as a comparative standard sample, tensile residual stress is obtained when the nitrogen gas pressure is low, but the gas pressure increases as the residual stress is shifts toward compression. At low gas pressure, the unit cell expands due to the incorporation of excess nitrogen atoms.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.586-591
• /
• 2004

We studied the dependence of hot-tarrier-induced degradation characteristics on nitrogen concentration in NO(Nitrided-Oxide) gate of nMOS, under ac and dc stresses. The $\Delta$V$_{t}$ and $\Delta$G$_{m}$ dependence of nitrogen concentration were observed, We observed that device degradation was suppressed significantly when the nitrogen concentration in the gate was increased. Compared to $N_2$O oxynitride, NO oxynitride gate devices show a smaller sensitivity to ac stress frequency. Results suggest that the improved at-hot carrier immunity of the device with NO gate may be due to the significantly suppressed interface state generation and neutral trap generation during stress.ess.

• 한국재료학회지
• /
• 제23권9호
• /
• pp.483-488
• /
• 2013

Over the past few decades, high-nitrogen austenitic steels have steadily received greater attention since they provide a unique combination of high strength and ductility, good corrosion resistance, and non-magnetic properties. Recently, highnitrogen 18Mn-18Cr austenitic steels with enhanced strength have been developed and widely used for generator retaining rings in order to prevent the copper wiring from being displaced by the centrifugal forces occurring during high-speed rotation. The high-nitrogen austenitic steels for generator retaining ring should be expanded at room temperature and then stress relief annealed at around $400^{\circ}C$ to achieve the required mechanical properties. In this study, four kinds of high-nitrogen 18Mn-18Cr austenitic steels with different nitrogen content were fabricated by using a pressurized vacuum induction melting furnace, and then the effects of nitrogen content, cold working, and stress relieving on tensile properties were investigated. The yield and tensile strengths increased proportionally with increasing nitrogen content and cold working, and they further increased after stress relieving treatment. Based on these results, a semi-empirical equation was proposed to predict the tensile strength of highnitrogen 18Mn-18Cr austenitic steels for generator retaining rings. It will be a useful for the effective fabrication of high-nitrogen 18Mn-18Cr austenitic steels for generator retaining rings with the required tensile properties.

• Journal of Nutrition and Health
• /
• 제28권4호
• /
• pp.291-297
• /
• 1995

This study aimed to verify the nutritional and curative effects of protein hydroysate in rats model with gastric ulcer induced by restraint and water-immersion stress. Sprague-Dawley, famale rats weighing approximtely 200g were forced in 5$\times$5$\times$15cm plexiglas cage. The restraint and water immersion stress was carried at 20$\pm$2$^{\circ}C$ for 8-hours. After stress 4 kinds of diets(10% casein, 20% casein, 10% casein hydrolysate, 20% casein hydrolysate) were given for 5 days. In the gastric ulcer rats model, the growth, gastric emptying rate, trypsin activity in gastrointestinal content, plasma total protein, albumin, $\alpha$-amino-N, UUN, creatinine and hydroxyproline of the urine and nitrogen retention were analyzed for nutritional effects of dietary nitrogen levels(10%, 20%) and sources (casein, casein hydrolysate). The results were as follows ; In gastric ulcer rats model, severeness of ulcer, plasma protein, gastric emptying rate, nitrogen retention rate were not different between 20% casein-fed group and 20% casein hydrolysatefed group. But 10% casein hydrolysate-fed group had more curative group. The casein hydrolysate diet-fed group was lower trysin activity in small intestianl content than the casein-fed group, at both casein level(10%, 20%). Finally at 20% levels, there was no difference between casein and casein hydrolysate diet, but 10% level, casein hydrolysate diet was more curative of ulcer than casein diet in gastric ulcer rat model. The results of this study provide useful information concerning diet therapy for the patients with gastrointestinal diseases and the field of enteral diet materials.

• Journal of Biosystems Engineering
• /
• 제35권2호
• /
• pp.132-137
• /
• 2010

Site-specific N application for corn is one of the precision crop management. To implement the site-specific N application, various nitrogen stress sensing methods, including aerial image, tissue analysis, soil sampling analysis, and SPAD meter readings, have been used. Use of side-dressing, an efficient nitrogen application method than a uniform application in either late fall or early spring, relies mainly on the capability of nitrogen deficiency detection. This paper presents map-based variable rate nitrogen application based using a multi-spectral corn nitrogen deficiency(CND) sensor. This sensor assess the nitrogen stress by means of the estimated SPAD reading calculated from the corn leave reflectance. The estimated SPAD value from the CND sensor system and location information form DGPS of each field block was combined into the field map using a ArcView program. Then this map was converted into a raster file for a map-based variable rate application software. The relative SPAD (RSPAD = SPAD over reference SPAD) was investigated 2 weeks after the treatments. The results showed that the map-based variable rate application system was feasible.

• 한국작물학회지
• /
• 제67권4호
• /
• pp.326-334
• /
• 2022

This study was carried out to investigate the optimal nitrogen concentration level suitable for forage rice growth by hydroponic cultivation in the salinity concentration of 0.1~0.3% which is similar to that of Muan reclaimed paddy field, and based on this results, to estimate optimal nitrogen fertilization level by field experiment in Muan reclaimed paddy for maximum forage production by cultivation of Yeongwoo rice. As a result of the growth response to the salt and nitrogen concentrations in the hydroponic cultivation experiment, the growth amount increased as the nitrogen concentration increased in the range of 0~24 me/L in the absence of salt stress. However, at a salt concentration of 0.1~0.3%, the growth amount was the highest at a nitrogen concentration of 12 me/L, and at higher nitrogen concentrations of that, the rice growth decreased as the nitrogen concentration increased. Therefore, nitrogen concentration of 12 me/L was judged to be an appropriate concentration for forage rice growth at salt concentration of 0.1~0.3%, and a nitrogen fertilization amount level corresponding to a nitrogen concentration of 12 me/L was actually applied to the Muan reclaimed paddy field for forage rice cultivation during two years. The amount of nitrogen fertilizer was tested with three treatments, which are 18 kg/10a considered appropriate, and 1.5 times and 2 times of the appropriate amount, and the planting density was tested with 2 treatments of 15 hills/m² and 26 hills/m². As a result of the reclaimed paddy field experiment, the yield was the highest when nitrogen fertilizer was applied at 18 kg/10a in the planting density of both treatments. Looking at the yield according to planting density, the high planting density plot yielded higher than the low planting density plot. In other words, when the planting density was 26 hills/m² and the nitrogen fertilization amount was 18 kg/10, the highest dry matter yield of 1,763 kg/10a was obtained. From the results of hydroponics and reclaimed field experiments, we could conclude that the productivity of forage rice decreased more as the nitrogen concentration increased when the nitrogen concentration was higher than the optimal level under salt stress.

• 한국진공학회지
• /
• 제8권2호
• /
• pp.165-171
• /
• 1999

Diamond-like carbon(DLC) films were synthesized using the rf-plasma CVD technique with the addition of small amounts of nitrogen and oxygen to a gas mixture of $CH_4$ and $H_2$. The gas flow ratio of $CH_4$ to $H_2$ was 2.4:1, and 3% , 13.6% of nitrogen were added to the gas mixture of $CH_4$ and $H_2$ for the deposition of DLC films. The film stress tended to decrease as the nitrogen concentration increased from 3% to 13.6%, probably due to the decrease of the number of the interlink between carbon atoms. The residual stress tended to slightly decrease when 3% of oxygen was added. Scratch tests were performed to investigate the adhesion between the DLC films and the Ti intelayer after pretreating the TiN surface with direct hydrogen plasma. The adhesion was enhanced by adding nitrogen and oxygen to the $CH_4$ and $H_2$ gas mixture. The adhesion for the 3% nitrogen addition was better than that for the 13.6% nitrogen addition. The Vicker's hardness of the DLC films was measured to be 1100Hv.