• 한국표면공학회지
• /
• 제56권4호
• /
• pp.219-226
• /
• 2023

Utilizing low-dimensional structures of oxide semiconductors is a promising approach to fabricate relevant gas sensors by means of potential enhancement in surface-to-volume ratios of their sensing materials. In this work, vertically aligned cupric oxide (CuO) nanorods are successfully synthesized on a transparent glass substrate via seed-mediated hydrothermal synthesis method with the use of a CuO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Cu metal film. Structural and optical characterization by x-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy reveals the successful preparation of the CuO nanorods array of the single monoclinic tenorite crystalline phase. From gas sensing measurements for the nitrogen monoxide (NO) gas, the vertically aligned CuO nanorod array is observed to have a highly responsive sensitivity to NO gas at relatively low concentrations and operating temperatures, especially showing a high maximum sensitivity to NO at 200 ℃ and a low NO detection limit of 2 ppm in dry air. These results along with a facile fabrication process demonstrate that the CuO nanorods synthesized on a transparent glass substrate are very promising for low-cost and high-performance NO gas sensors.

• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.296-301
• /
• 2015

The experiment was performed for in order to remove NOx which is generated in the Ship's engine. it was performed test in order to remove NOx which is generated in the Ship's engine. It was used as the oxidizing agent sodium chlorite. Use the oxidizer is nitrogen monoxide was oxidized to nitrogen dioxide. and was tested pH adjustment to increase the efficiency of oxidizing. An aqueous solution of sodium hydroxide was used for the nitrogen dioxide absorbent. Low concentration of the solution, it showed a high efficiency. improves the absorption efficiency by add additives.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.113-122
• /
• 1994

This paper describes the effects of combustion parameters on the characteristics of combustion products in swirling flow furnace. The concentration of combustion products and temperature distribution of flow field in the furnace have been investigated by numerical method. The fuel was injected into the furnace and the swirling device was constructed with three kinds of vane swirler at inlet port of furnace. The results of this study showed that the effect of combustion parameters on the concentration characteristics of carbon monoxide and nitrogen monoxide of combustion products. It was found that the pollutant formation wad dependent on the equivalence ratio and swirl intensity level.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.171-178
• /
• 2008

The combustion and exhaust emission characteristics were investigated in an DME fueled HCCI engine. Carbon dioxide, nitrogen and mixed gas, which was composed of carbon dioxide and nitrogen, were used as control parameters of combustion and exhaust emission. As the oxygen concentration in induction air, which was occurred by carbon dioxide, nitrogen and mixed gas, was reduced, the start of auto-ignition was retarded and the burn duration was extended due to obstruction of combustion and reduction of combustion temperature. Due to these fact, indicated mean effective pressure was increased and indicated combustion efficiency was decreased by carbon dioxide, nitrogen and mixed gas. In case of exhaust emission, hydrocarbon and carbon monoxide was increased by reduction of oxygen concentration in induction air. Especially, partial burning was appeared at lower than about 18% of oxygen concentration by supplying carbon dioxide. However it was overcome by intake air heating.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.639-646
• /
• 2012

가열된 동축류 공기에서 일산화탄소/수소의 층류 제트에 대한 자발화된 부상화염의 특성을 조사하였다. 그 결과로 자발화가 발생하지 않는 영역에서는 제트속도의 증가에 따라 노즐부착화염에서 안정화된 층류 부상화염을 거치지 않고 바로 화염날림이 발생하였다. 자발화 영역에서, 질소 희석된 일산화탄소의 자발화된 부상화염은 산화제 내의 함유된 수분에 따른 점화지연시간의 변동으로 그 부상높이가 크게 영향을 받았다. 그리고 수소에 의한 저온 자발화 영역에서 자발화된 부상화염은 제트속도의 증가에 따라 부상높이가 감소하다가 증가하는 독특한 현상이 발생하였다. 점화지연시간에 의한 자발화된 층류 부상화염의 안정화 메커니즘을 기반으로, 그 부상높이의 거동은 점화 과정에서 발생하는 열손실의 영향뿐만 아니라 연료제트의 운동량과 질량의 선호 확산에 의하여 영향을 받을 수 있다는 것을 확인하였다.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.540-550
• /
• 2013

Various efforts have been explored to save the cost in many industrial fields. In order to recover the residual thermal energy from the flue gas, an extreme high efficiency heat exchanger is planning to install at a power plant. The gas temperature will be reduced to $40^{\circ}C$ from $115^{\circ}C$. Thus gas buoyancy decreases, and dispersion of nitrogen oxides is expected to deteriorate as increasing relative humidity. In this study, the conversion of nitrogen monoxide to nitrogen dioxide and dispersion regime are investigated through computational modeling. Nitrogen dioxide which indicates 0.1 ppm at 85 m from the ground could be propagated to 620 m at $115^{\circ}C$ of the flue gas, whilst when cooled down to $40^{\circ}C$, it expands up to 750 m. The ground level influence area showed more expansion of dispersion, approximately to 930 m.

• 자연과학논문집
• /
• 제5권1호
• /
• pp.67-75
• /
• 1992

결정성 aluminosilicate 광물의 일종인 천연 zeolite는 광물학적 특성과 화학적 표면활성으로 인하여 다방면의 공업화학적 이용가치가 매우 높고 광물중 특히 가장 높은 양이온교환능을 가지고 있어 기체분자에 대한 선택적 흡착력이 큰 molecular sieve로써 흡착분리제로는 물론, 건조제, 흡습제, 이온교환체, 촉매, 증량제 그리고 폐수처리제, 경수의 연화제등으로 이용도가 날로 증가하고 있다. 국내산 천연 zeolite를 IN HCL용액과 NaCl용액으로 화학처리하여 다공성을 증가시켜 column충전제로 사용한 결과, 혼합기체 Ar, $N_2$ CO및 $CH_4$의 분리특성에 관해서 HCL용액으로 처리한 mordenite 시료는 활성화온도가 $300^{\circ}C$일 경우, CO와 $CH_4$의 분리는 곤란하나 $350^{\circ}C$에서는 분리가 용이하였고 NaCl용액으로 처리한 시료는 미처리한 것과 거의 유사하였다. Ar과 $N_2$와의 분리에는 산 또는 알칼리로 화학처리한 시료에도 별로 효과가 없었으나 HCL용액과 NaCl용액을 연속적으로 처리한 천연 zeolite는 합성 zeolite의 특성에 견줄만한 정도로 기체분리효과와 HETP값을 보여주었다. 한편 시료의 화학처리에 의한 Ar과 CO의 흡착열의 변화는 극성기체인 CO의 경우, 별로 변화가 없지만 무극성기체인 Ar은 영향을 받기가 용이하였다. 또한 carrier gas He의 유속이 대략 20~30ml min범위일때 최소의 HETP값을 가지며 column의 효능이 좋았다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.374.1-374.1
• /
• 2002

The barks o.f Pinus densiflara representative Pinus species graws in Korea, have been used for oriental traditional medicine as the remedies for rheumatitis. hemorrhage and cancer. Water soluble fraction of 80% acetone extracts from the barks af Pinus densiflera (PDB) showed nitrogen monoxide(NO) production inhibitory activity in IFN-${\gamma}$. LPS stimulated RAW 264.7 cell. (omitted)

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.266.2-266.2
• /
• 2003

The seeds of Astragalus sinicus grows in Korea have been used for oriental traditional medicine as the remedies for inflammation. Eight flavonoids were isolated from the Seeds of Astragalus sinicus and studied its anti-inflammatory activity. Some flavonoid compounds showed significant nitrogen monoxide(NO) production inhibitory activity in IFN-${\gamma}$, LPS stimulated RAW 264.7 cell. There compounds also showed significant antioxidative in DPPH assay. (omitted)

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.89-93
• /
• 1999

Experimental studies are conducted to investigate the flame stability and the thermal/fuel NOx formation characteristics of the low calorific value(LCV) gas fuel. Synthetic LCV fuel gas is produced through mixing carbon monoxide, hydrogen, nitrogen and ammonia on the basis that the thermal input of the syngas fuel into a burner is identical to that of natural gas, and then the syngas mixture is fed to and burnt with air on flat flame burner. Flame behaviors are observed to identify flame instability due to blow-off or flash-back when burning the LCV fuel gas at various equivalence ratio conditions. Measurements of NOx in combustion gas are made for comparing thermal and fuel NOx emissions from the LCV syngas combustion with those of the natural gas one, and for analyzing ammonia to NOx conversion mechanism. In addition, the nitrogen dilution of the LCV syngas is preliminarily attempted as a NOx reduction technique.