• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.1977-1983
• /
• 2000

SCR(selective catalytic reduction) pilot plant for reduction of the nitrogen oxides using diesel oil as a reductant was installed at the NG(natural gas) fired combined cycle and the activity of Pt(0.3%)/Zeolite catalyst was studied in real flue gas condition according to the amount of reductant. reaction temperature and space velocity. NOx conversion gradually increased with increasing the diesel oil concentration up to C/N ratio 5.5(C/N ratio: the ratio of the number of carbon atom to the number of NOx molecules included in the flue gas). Increasing the reaction temperature. NOx conversion increased and reached a maximum conversion of 50% at $190^{\circ}C$. NOx conversion did not changed with increasing the space velocity up to 18,500/hr and then gradually decreased. These results reveal the potential for diesel oil as a reductant for de-NOx SCR process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.4
• /
• pp.470-473
• /
• 2000

The experiment was carried out to evaluate the effect of varying levels of flaked com abomasally infused on energy metabolism and nitrogen metabolism in fattening steers. The starch levels of flaked corn of abomasally infused were 0, 300, 600 and 900 g/d. Four mature fattening steers fitted with permanent abomasum cannulas were allocated to a $4{\times}4$ Latin square design were fed at 1.2 maintenance requirement a basal diet of Chinese wildrye (Aneurolepidium Chinense). Compared with 0 g/d (control group), digestible nitrogen, retention nitrogen (RN, g/d) and the efficiency of digestible nitrogen converted into retention nitrogen (RN/DN, %) of 300, 600 and 900 g/d groups were higher (p<0.05). The post-ruminal starch digestion of flaked corn were 71.36, 80.27 and 64.71 % when the amounts abomasally infused were 300, 600 and 900 g/d, respectively. When the amount of starch abomasally infused was more than 600 g/d, the post-ruminal digestion of starch decreased. 300, 600 and 900 g/d starch infusion groups showed higher metabolizable energy intake (ME) and net energy gains (NEg, MJ/d) than the control group, and the efficiencies of metabolizable energy converted into body weight (Kf, %) of these groups were higher than the control group by 38.31, 73.18 and 67.06% (p<0.05). Kf (Y, %) had a positive curved relation to starch of flaked com abomasally infused (X, g/d), $Y=36.1605X^{0.0760}$ (n=16, r=0.9308).

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.244-249
• /
• 2016

Anaerobic digester supernatant including high concentrations of nitrogen is recycled to water treatment line and make pollutant load increase in municipal wastewater treatment plant(MWTP). To treat nitrogen in anaerobic digester supernatant is suggested the method of MWTP retrofit. In this study, the lab scale reactor was operated about 200 days using supernatant of anaerobic digester. The results could draw operation condition that ammonium nitrogen removal efficiency more than 90% and nitrite conversion efficiency over 70%. Correlation between operation efficiency and operation factors was analyzed based on the operation results. Ammonium nitrogen remove efficiency and nitrite conversion efficiency were related to solid retention time (SRT), ammonium nitrogen load and ammonium nitrogen loading per unit mixed liquer suspended solid (MLSS). Results of this study can be used effective data on nitritation of supernatant of anaerobic digester, and be expected to increase availability of nitritation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.263-270
• /
• 1982

In an attempt to evaluate the nutritional quality of seaweed protein, the effects of heat treatment on the in vitro digestibility and trypsin inhibitor content in seaweed were determined. In this study, the nitrogen-to-protein conversion factors were also calculated on the basis of quantitative amino acid data. The results are as follows : 1. The in vitro protein digestbilty of red seaweeds (P. teoera anc P. suborbiculata) were ranged from 78.5 to 82.2, and green seawerd (E. linza) and brown seaweeds showed value under 80 in vitro digestibility. In general, trypsin inhibitor contents in brown seaweed were higher (0.33-0.54 mg/g) than those of red seaweeds (0.26-0.39 mg/g). And it is noted that the lowest trypsin inhibitor content was shown in green seaweed (E. linza) in spite of lowest in spite digestibility (78.5). 2. The in vitro protein digestibility of sun dried laver (P. tenera) was increased with cooling time (microwave heating), but it was not significant. Hot plate cooking raised the in vitro digestibility from 81. 1 to 84.5. The influence pot cooking time on trypsin inhibitor content was inversely proportional to in vitro digestibility. 3. Computed nitrogen factor, based on amino acid content (Factor method) and Kjeldahl nitrogen content (Kjeldahl mettled), were 5.83 (H. fusiforme)- 6.52 (P. tencra) as Factor method and 5.40 (U. pinnatifida)-6.29 (P. tenera) as Kjeldahl method. Individual value for each nitrogen conversion factor differed by species, especially in brown seaweeds. The best estimate of the protein content of seaweed can be calculated, from multiplying the summed amino acid content by conversion factor (Factor method).

• Composites Research
• /
• v.17 no.6
• /
• pp.44-51
• /
• 2004

To determine the effect of numbers of nitrogen atom bonded at ethyl group included in main chain of linear amine curing agents of epoxy-cure systems on the thermal and mechanical properties, standard epoxy resin DGEBF was cured with DETA, TETA and TEPA in a stoichiometrically equivalent ratio. From this work, the effect of curing agents of the DGEBF/amine systems oil the thermal and mechanical properties was significantly influenced by numbers of nitrogen atom of curing agents. The results showed that heat of reaction increased, and maximum exothermic temperature decreased with the decrease of numbers of nitrogen atom. In case of cured systems, density and maximum conversion(%) had no relation to numbers of nitrogen atom, but flexural modulus and tensile modulus increased with the decrease of numbers of nitrogen atom in main chain. Thermal stability, shrinkage(%), Tg, tensile and flexural strength showed irregular tendency having nothing to do with numbers of nitrogem atom at a sight. This findings imply that the differences in the maximum conversion(%) about the chain length of curing agents affect the thermal and mechanical properties.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.2
• /
• pp.168-174
• /
• 2005

Aluminum tri-butoxide was mixed with the water/ethanol solution and then chloroplatinic acid was added to the solution. The solution was dried at $100^{\circ}C$ for 15hrs to remove the solvent and water then it was calcined at $500^{\circ}C$. The catalyst was activated with a gas mixture. During the activation, the temperature was increased from $150^{\circ}C$ to $500^{\circ}C$. The necessary amount of urea was dissolved in 50mL water and injected. Aqueous urea solution was then mixed with the feed gas stream. At low temperatures, nitrogen containing compounds of urea decomposition are used as reductants in the reducton of $NO_X$. However at high temperatures the nitrogen containing compounds are oxidized to NO and $NO_2$ by oxygen instead of being used in the reduction. The activity of the catalyst was dependent on urea concentration in the feed stream when there was not adequate water vapor in the feed. The maximum conversion was shifted from $250^{\circ}C$ to $150^{\circ}C$ when water concentration was increased from 2 to 17%. It seems that the maximum temperature shifts to lower temperatures because the hydrolysis rate of HNCO increases with water, resulting in higher amounts of $NH_3$.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.286-292
• /
• 2011

Preparing for the Standards for Effluents which will be strengthen from 2012, many ways like remodellings and repairs of sewage treatment plant (STP) are considered. The treatment of the recycle water from the sludge treatment process contains high-strength organic compounds and nitrogen is considered as alternative. In the treatment of high-strength nitrogen, nitritation has more economic advantages than nitrification. In this study, lab-scale reactor was operated at the $35^{\circ}C$, $20^{\circ}C$ and $10^{\circ}C$ conditions using effluent of anaerobic digester to investigate the nitrogen removal by nitritation. Long-term stable nitritation was achieved at the $35^{\circ}C$, $20^{\circ}C$ but $10^{\circ}C$. In the stable nitritation states, nitrite conversion was higher at the high temperature of $35^{\circ}C$ than the room temperature of $20^{\circ}C$. Also shorter solid retention time (SRT) was needed to induce high nitrite conversion at the high temperature of $35^{\circ}C$. It was showed that temperature and SRT are important factors to induce nitritation.

• Journal of Nutrition and Health
• /
• v.29 no.3
• /
• pp.251-259
• /
• 1996

The validity of the energy data of the starch-foods and seaweeds in Korean food composition tables has been suspected due to possible differences in their chemical compositions from those of western food ingredients. Energy conversion parameters being used currently in nutrition has been derived in countries where food items re quite different from ours. This study was undertaken to determine the metabolizable energy of starch-foods and seaweeds by the method selected in preexperiment20). Cooked starch foods and seaweeds were freeze-dried and fed to Sprague Dawley rat with 200∼300g body weight to measure apparent metabolizable energy (AME) values and nitrogen-corrected AME (AMEn) values for four days after three days of preliminary period for adaptation to the diets. The AME and AMEn values of the wheat noodle were 4554.6, 4584.7, the Starch Vermicelli, 3763.4, 3855.7, the Ra myon, 4916.9, 4876.0, the Buckwheat noodle, 4469.7, 4442.0kcal/kg dry matter, the Potato, 4514.6, 4520.0 and those of the Bread, 3256.9, 3582.6, 3260.5, kcal/kg dry matter, respectively. Those of Sea tangle were 1437.3, 1631.3 and of Laver, 3126.6, 3171.3kcal/kg dry matter, resectively. When the AME values of the starch-foods and seaweeds measureed in present study were compared with energy values calculated by various conversion parameters such as Atwater's Rubner's, Sochun's and FAO's, there appeared dramatic differences indicating that for many of the food items, the latter energy values by conversion factors are hardly acceptable. These data also suggest that the existing energy conversion factors are not applicable to seaweeds and a further study is needed to obtain specific factors for the conversion to biological energy from the chemical composition of seaweeds.

• Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.173-180
• /
• 2006

Autotrophic nitrogen removal and its microbial community from a laboratory scale upflow anaerobic sludge bed reactor were characterized with dynamic behavior of nitrogen removal and sequencing result of molecular technique (DNA extraction, PCR and amplification of 16S rDNA), respectively. In the experiment treating inorganic wastewater, the anaerobic granular sludge from a full-scale UASB reactor treating industrial wastewater was inoculated as seed biomass. The operating results revealed that an addition of hydroxylamine would result in lithoautotrophic ammonium oxidation to nitrite/nitrate, and also hydrazine would play an important role for the success of sustainable nitrogen removal process. Total N and ammonium removal of 48% and 92% was observed, corresponding to nitrogen conversion of 0.023 g N/L-d. The reddish brown-colored granular sludge with a diameter of $1{\sim}2\;mm$ was observed at the lower part of sludge bed. The microbial characterization suggests that an anoxic ammonium oxidizer and an anoxic denitrifying autotrophic nitrifier contribute mainly to the nitrogen removal in the reactor. The results revealed the feasibility on development of high performance lithoautotrophic nitrogen removal process with its microbial granulation.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1199-1204
• /
• 1997

SiC conversion layer was fabricated by the chemical vapor reaction between graphite substrate and silica powder. The CVR process was carried out in nitrogen atmosphere at 175$0^{\circ}C$ and 185$0^{\circ}C$. From the reduction of silica powder with graphite substrate, the SiO vapor was created, infiltrated into the graphite substrate, then, the SiC conversion layer was formed from the vapor-solid reaction of SiO and graphite. In the XRD pattern of conversion layer, it was confirmed that 3C $\beta$-SiC phase was created at 175$0^{\circ}C$ and 185$0^{\circ}C$. Also, in the back scattered image of cross-sectional conversion layer, it was found that the conversion layer was easily formed at 185$0^{\circ}C$, the interface of graphite substrate and SiC layer was observed. It was though that the coke particle size and density of graphite substrate mainly affect the XRD pattern and microstructure of SiC conversion layer. In the oxidation test of 100$0^{\circ}C$, the SiC converted graphites exhibited good oxidation resistance compared with the unconverted graphites.