• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.857-860
• /
• 2000

The objective of this paper is to demonstrate degradation phenomena through DC degradation tests and predicts degradation phenomena as a function of time from the tests. The ZnO varistor used in this investigation were fabricated by standard ceramic techniques. Especial, these were sintered in nitrogen atmosphere, at 2 h, for $1300^{\circ}C$. The conditions of DC degradation test were 115$\pm$$2^{\circ}C$for 0, 2, 4, and 8 h, respectively. To demonstrate the degradation phenomena of ZnO varistors, Voltagecurrent analyses were performed before and after the degradation test, and frequency analyses were used with the time of the degradation tests. It was found that the degradation occurred in not grain but grain boundary and the degradation behavior of varistors was unsymmetrically degraded with the direction of tests.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.89-93
• /
• 1999

Experimental studies are conducted to investigate the flame stability and the thermal/fuel NOx formation characteristics of the low calorific value(LCV) gas fuel. Synthetic LCV fuel gas is produced through mixing carbon monoxide, hydrogen, nitrogen and ammonia on the basis that the thermal input of the syngas fuel into a burner is identical to that of natural gas, and then the syngas mixture is fed to and burnt with air on flat flame burner. Flame behaviors are observed to identify flame instability due to blow-off or flash-back when burning the LCV fuel gas at various equivalence ratio conditions. Measurements of NOx in combustion gas are made for comparing thermal and fuel NOx emissions from the LCV syngas combustion with those of the natural gas one, and for analyzing ammonia to NOx conversion mechanism. In addition, the nitrogen dilution of the LCV syngas is preliminarily attempted as a NOx reduction technique.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.62-70
• /
• 1996

We experimented on cutting characteristics-cutting force, behavior of cutting temperature, surface roughness. chip thickness under low temperature, which generated by liquid nitrogen(77K). The work-pieces were freezed to-195 .deg. C and liquid nitrogen was also sprinkled on cutting area in order to decrease an experimental error of machining in low temperature. The workpiece was became to -195 .deg. C in5 minutes. In cooled condition surface roughness of workpiece was better than normal condition. In addition, we investigated the possibility that surface roughness of workpiece and cutting force can be predicted analyzing cutting conditions by the trained neural network.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.138-146
• /
• 2008

본 연구에서는 잎담배처리공정 및 궐련제조공정에서 분리되어 배출되는 바이오매스 중에서 가장 많은 양을 차지하는 황색종 주맥 바이오매스의 화학성분, 세포벽 물질 조성 및 비등온 조건에서의 열분해 특성에 대해 분석평가 하였다. 주맥 바이오매스에는 전건시료 기준으로 조회분이 19.1%, 전당성분은 20.7%로 다량 함유되어 있었고, 무기원소 중에는 칼륨이 3.8%, 개별당 중에는 fructose 함량이 6.2%로 가장 많은 것으로 분석되었다. 세포벽 성분 중 리그닌 함량은 3%로 낮았지만 펙틴의 함량은 7%로 높았으며, 홀로셀룰로오스는 전체의 13% 정도를 차지하였고, 이중 $\alpha$-셀룰로오스의 함량은 약 60%, 나머지는 $\beta$와 $\gamma$-셀룰로오스로 나타났다. 공기기체 조건과 질소기체 조건에서 황색종 주맥의 열분해 특성은 서로 다르게 나타났는데, 특히 산소가 존재하는 공기기체 조건에서는 $473^{\circ}C$와 $581^{\circ}C$ 온도에서 질소기체 조건에서는 나타나지 않는 열감량 피크들이 DTG 곡선에서 나타났으며, 이 중 $581^{\circ}C$ 온도에서의 피크는 열수추출하여 용해성분을 제거한 주맥의 열분해 시에는 발생하지 않았다. 분리된 용해성 성분을 냉동건조 시킨 후 열감량 분석을 실시한 결과 이 피크가 용해성 성분에서 기인된 것임을 확인할 수 있었다. 주맥 바이오매스의 헤미셀룰로오스와 셀룰로오스 열분해 특성차이는 질소기체 조건에서 더욱 확실하게 구별되어 나타나는 것을 확인할 수 있었다.

• Tribology and Lubricants
• /
• 제10권4호
• /
• pp.13-26
• /
• 1994

Effects of resin contents, number of carbonization, graphitization, sliding speed, and oxidation on friction and wear behavior of carbon/carbon composite materials were investigated. Friction and wear tests were carried out under various sliding conditions. An experimental setup was designed and built in the laboratory. Stainless steel disks were used as the counterface material. Friction coefficient, emperature, and wear factor were measured with a data acquisition system. Wear surfaces were observed by the scanning electron microscope. It has been shown that the average friction coefficient was increased with the sliding speed in the range of 1.43~6.10 m/s, but it as decreased in the range of 6.10~17.35 m/s. Specimens prepared by different numbers of carbonization. showed variations in friction coefficient and friction coefficient of the graphitized specimen was the highest. Friction coefficients depended on contribution of the plowing and adhesive components. As the number of carbonization was increased, wear factor was reduced. Wear factor of the graphitized specimens dropped further. In the case of graphitized specimens, sliding speed had a large influence on wear behavior. When the tribological experiments were conducted in nitrogen atmosphere, the wear factor was decreased to two thirds of the wear factor obtained in air. It is obvious that the difference was affected by oxidation. Results of friction and wear tests were applied to a neural network system based on the backpropagation algorithm. A neural network may be a valuable tool for prediction of tribological behavior of the carbon/carbon composite material if ample data are present.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.73-83
• /
• 2019

It is important to clarify the mechanisms of molten-fuel-pool sloshing behavior that might be encountered during a core disruptive accident of sodium-cooled fast reactors. In this study, motivated by acquiring some evidence for understanding the characteristics of this behavior at more realistic conditions, a number of experiments are newly performed by injecting nitrogen gas into a water pool with the accumulation of solid particles. To achieve comprehensive understanding, various parameters including particle bed height, particle size, density, shape, gas pressure along with the gas-injection duration, were employed. It is found that due to the different interaction mechanisms between solid particles and the gas bubble injected, three kinds of regimes, termed respectively as the bubble-impulsion dominant regime, the transitional regime and the bed-inertia dominant regime, could be identified. The performed analyses also suggest that under present conditions, all our experimental parameters employed can have noticeable impact on the regime transition and resultant sloshing intensity (e.g. maximum elevation of water level at pool peripheries). Knowledge and fundamental data from this work will be used for the future verifications of fast reactor severe accident codes in China.

• 한국토양비료학회지
• /
• 제45권6호
• /
• pp.1094-1099
• /
• 2012

담수조건으로 토양질소동태에 대한 결실기 자운영의 투입효과를 포트시험을 통해 평가하였다. 자운영의 투입에 따라 벼의 자운영유래 질소 이용율은 약 51-64%으로 자운영의 투입량이 높을수록 감소하였다. 수확기 토양의 자운영질소는 약 3-5%가 저장되었고, 자운영 유래 질소의 손실은 각각 32.4와 44.1%를 차지하였다. 벼 수량 대비 자운영 $30Mg\;ha^{-1}$ 시용은 질소추천시비량을 전량 대체할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권2호
• /
• pp.236-244
• /
• 2020

Objective: The objective of this study was to evaluate the effects of different levels of quantitative feed restriction on nutrient intake and digestibility, nitrogen balance, efficiency and feeding behavior, and productive performance in F1 Holstein/Zebu cows during the middle third of their lactation. Methods: Sixty F1 Holstein/Zebu cows with 111.5±11.75 days of lactation and an initial body weight (BW) of 499±30 kg (mean±standard error of the mean) were used. The experimental design was completely randomized with the following diet levels of feed restriction: 3.39%, 2.75%, 2.50%, 2.25%, and 2.00% of BW, with 12 replications for each level. The experiment lasted for 63 days, of which each period lasted 21 days with the first 16 days for diet adaptation followed by 5 days for collection of data and samples. Results: For each 1% of BW diet restriction, there was a decrease in dry matter intake of 5.26 kg/d (p<0.01). There was no difference in daily milk production (p = 0.09) under the restriction levels of 3.39% to 2.0% of BW. When corrected for 3.5% fat, milk production declined (p = 0.05) 3.46 kg/d for each percentage unit of feed restriction. Conclusion: Restricting the feed supply for F1 Holstein/Zebu cows in the middle third of their lactation period altered nutrient intake, nitrogen balance and ingestive behavior but did not affect milk production or feed efficiency. However, considering the observed BW loss and decrease in milk production corrected for 3.5% fat, restriction of no less than 2.5% BW is recommended.

• 한국토양비료학회지
• /
• 제39권5호
• /
• pp.285-291
• /
• 2006

석비레 성토지에서 고랭지배추 재배 시 시비 효율을 증대에 필요한 자료를 얻기 위하여, 중질소 추적자법을 이용한 라이시메터에서 경사도와 시비방법이 시용질소의 행동에 미치는 영향을 조사하였다. 석비레 성토지 토양으로 경사도가 5, 15 및 30%가 되도록 라이시메터 (폭 1.2m ${\times}$ 길이 1.6 m)를 충진한 후 중질소로 표지된 요소를 입자형태로 살포 (고형비료시비구) 하거나 관개수에 녹여 고랑관수 (관비구) 하였다. 토양 질소 중 시용한 요소로부터 유래한 질소가 차지하는 비율 (NDFF, nitrogen derived from fertilizer)은 경사도가 낮을수록, 또한 토양깊이가 얕을수록 증가하였다. 배추에 의한 시비 질소의 회수율은 경사도 5%에서 고형비료시비구 69.5%, 관비구 76.5%, 경사도 15%에서 고형비료시비구 65.0%, 관비구 70.2% 및 경사도 30%에서 고형비료시비구 56.1%, 관비구 62.3%로서 경사도가 낮을수록 높았으며 관비구가 고형비료시비구보다 높았다. 따라서 고랭지배추 재배시 관비형태의 시비방법을 사용하면 시용비료에 의한 환경오염을 감소시키고, 작물에 의한 시용비료의 이용률을 증가시키는데 크게 기여할 것으로 판단된다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.85-86
• /
• 2014

The characteristics of the outward-propagating premixed flames of stoichiometric mixtures of R134a/methane/oxygen/nitrogen have been experimentally investigated in a constant volume combustion chamber. Three regimes of the expanding flames were categorized based on the flame behavior.