• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.452-458
• /
• 2017

The nitrogen isotope value in both ammonium and nitrate ion were determined at 9 stations during both June and August 2016, in order to understand the origin of DIN at the Han river. ${\delta}^{15}N-NO_3$ and ${\delta}^{15}N-NH_4$ values in 8 stations (CP, SB, MHC, P4, SJ, SBC, P2, SC) were no significant variation. However ${\delta}^{15}N-NO_3$ and ${\delta}^{15}N-NH_4$ values in KK (Kyeongan stream) showed significant different in comparison with 8 stations, with an apparent increase of nitrogen isotope values. These results indicate that antropogenic nitrogen source influence on KK station. Also the ${\delta}^{13}C$ and ${\delta}^{15}N$ isotope ratio of phytoplankton (Diatom and Cyanobacteria) in KK (Kyeongan stream) showed heavier values, compared to other study stations. These results indicate that nitrogen isotope value in phytoplankton effects by different nitrogen source in study sites. These results suggest that the analysis of stable isotope ratios is a simple but useful tool for the identification of dissolved inorganic nitrogen origin in aquatic environments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.5
• /
• pp.724-729
• /
• 2008

Umbilical cord blood has been recently considered an attractive potential alternative as a source of stem cell transplantation to curing diseases such as leukemia, cancers, immune disorders. Normally the stored system of the umbilical cord blood specimen is equipped with a computer-controlled robotic arm that enables the samples to locate the identification places in liquid nitrogen tank at regulated temperature as about $-196^{\circ}C$. As the half of robotic arm is in the air and the rest part is submerged in liquid nitrogen, the temperature of robotic arm varies from ambient to liquid nitrogen temperature. In this study the temperature variation of upper part of arm above tank lid was thermally analysed by using the commercial code of Ansys. The result of analysis was that the upper part of robotic arm was seriously frozen due to heat transfer from liquid nitrogen as low as -$120^{\circ}C$. In order to solve the frost problem of robotic arm, small PTFE tube block as resistance material was introduced into the lower part of tank lid instead of the whole stainless steel(SUS) robotic arm. The results showed that the temperature of robotic arm above the lid was higher enough, and this method would be one of the very effective measure to solve the problem.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.102-105
• /
• 1999

Mineralization of organic N is an important factor in determining the appropriate rate of organic matter application to paddy fields. A kinetic analysis was conducted for nitrogen mineralization of rice, barley, Chinese milk Ovetch (Astragalus sinicus L.; MV) and narrow leaf vetch straw in paddy soil. Nitrogen immobilization occurred rapidly and its rate increased in straw with high C/N ratio. The amount of nitrogen mineralization was rapid in the first year of rice-vetch cropping system. The rate constant (K) depended on the C/N ratio of organic matter. Mineralization of straw increased at high temperature. The amount of available N increment resulted in fast mineralization of straw, especially in rice and barley straw. Chinese milk vetch had the greatest mineralization rate at all temperatures and fertilization levels followed by narrow-leaf vetch. However, rice and barley straws with high C/N ratio immobilized the soil N at the initial incubation duration. Chinese milk vetch or narrow leaf vetch was not effectively mineralized in mixed treatments with rice or barley straw. The mineralization rate of organic matter was mostly affected by the C/N ratio of straw and temperature of incubation. Organic matter with low C/N ratio should be recommended to avoid the immobilization of soil N and the increasing mineralization rate of straw.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.5
• /
• pp.235-239
• /
• 2006

The aluminum nitride(AlN) layer on Al7075 substrate has been formed through nitrogen ion implantation process. The implantation process was performed under the conditions : 100 keV energy, total ion dose up to $2{\times}10^{18}\;ions/cm^2$. XRD analysis showed that aluminum nitride layers were formed by nitrogen implantation. The formation of Aluminum nitride enhanced surface hardness up to 265HK(0.02 N) from 150HK(0.02 N) for the unimplanted specimen. Micro-Knoop hardness test showed that wear resistance was improved about 2 times for nitrogen implanted specimens above $5\;{\times}\;10^{17}\;ions/cm^2$. The friction coefficient was measured by Ball-on-disc type wear tester and was decreased to 1/3 with increasing total nitrogen ion dose up to $1\;{\times}\;10^{18}ions/cm^2$. The enhancement of mechanical properties was observed to be closely associated with AlN formation. AES analysis showed that the maximum concentration of nitrogen increased as ion dose increased until $5\;{\times}\;10^{17}\;ions/cm^2$.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.49-52
• /
• 2003

The effects of nitrogen on the deformation behavior of duplex stainless steel have been studied The variation of strength was correlated with the characteristic microstructures. Analysis based on Hall-Petch relation confirmed that nitrogen enhances phase-boundary strengthening effect. The evolution of dislocation structure, slip traces, and misorientation distribution during deformation were also characterized to elucidate the effect of nitrogen on inelastic deformation mechanism.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.2
• /
• pp.100-105
• /
• 2017

Various methods for assessing soil total nitrogen (TN) and inorganic N content have been developed to manage nutrient and to understand N cycle in soil. This paper address the technical procedures in arable soil samples to conduct soil sampling, sample preparation, and measuring total N and inorganic N. Among various methods for measuring soil total nitrogen contents, Kjeldahl distillation and Indophenol blue method have widely used due to reliability and economic advances. Also, two methods can analyze more samples at the same time compared with other nitrogen measuring methods. For evaluating inorganic N content, mainly in forms of nitrate-N ($NO_3{^-}-N$) and ammonium-N ($NH_4{^+}-N$), extraction with a single reagent such as 2M KCl has been employed, followed by Kjeldahl distillation or indophenol blue methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.2
• /
• pp.106-111
• /
• 1999

To investigate the effects of planting density and nitrogen level on growth and yield potential of newly bred heavy panicle japonica rice with large grain (Iksan 435 and Iksan 438) or many spikelets per panicle(HR14022-21-8-4 and HR14022-21-8-6), four heavy panicle type rices and two many panicle type rices(Dongjinbyeo and Donganbyeo) as the checks were planted under standard planting density (30$\times$15 cm) and dense planting density (15$\times$15 cm) with two nitrogen levels of standard nitrogen level(110 kg h $a^{-1}$) and heavy nitrogen level(165 kg h $a^{-1}$). Effective tiller rate decreased in dense planting or heavy nitrogen, when compared to standard nitrogen and planting, while leaf area index and to dry weight increased in dense planting or heavy nitrogen. Tiller numbers and panicle numbers were more increased by dense planting than heavy nitrogen, whereas spikelet numbers were more increased by heavy nitrogen than dense planting. Ripened grain ratio was slightly lower only in dense planting. 1,000 grain weight in brown rice was not significantly different in dense planting or heavy nitrogen. Milled rice yield was highest in heavy nitrogen with standard planting for heavy panicle type rice, while yield for many panicle type rice was highest in heavy nitrogen with dense planting, suggesting that many panicle type rice possesses higher adapt-ability for dense planting than heavy panicle type rice. Path coefficient analysis revealed that top dry weight, spikelet number and grain weight were the greatest positive contributors to yield, whereas tiller number was negative to yield.d.

• Korean Journal of Animal Reproduction
• /
• v.21 no.2
• /
• pp.191-195
• /
• 1997

The objective of this study were to compare two methods of analysis of milk urea nitrogen (MUN) and to relate conentration of MUN to pregnancy rate in dairy cows. The Azotest and Sigma method for MUN analysis were compared. The Azotest consistently underestimated the Sigma values for same samples, except for those in rank 3. The CV for the Azotest, within each rank, were less than 15%, demonstrating acceptable repeatability of the Azotest within a rank. Concentrations of MUN higher or lower than MUN in rank 3 and 4 were associated with decreased pregnancy rate. Mun concentrations in rank 5 and 6 were associated with a, pp.oximately a 16 percentage point decrease in pregnancy rate. Mun concentrations in rank 5 and 6 were associated with a, pp.oximately a 16 percentage point decrease in pregnancy rate after AI in dairy cow. This results suggest that Azotest may be benificial to dairy producers to monitor urea nitrogen concentration in their herd in efforts to maintain or improve reproductive efficiency.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.121-128
• /
• 1998

The degradation of mechanical properties in the high nitrogen steel HN3 developed for nuclear fusion reactor has been evaluated quantitatively using the small punch(SP) test, X-ray diffraction (XRD) analysis has also been conducted to identify carbides or nitrides precipitated on grain boundaries of the heat treated samples. Mechanical properties of the steel HN3 significantly decreased with increasing heat treatment time and temperature or with decreasing testing temperature. Combination of XRD and metallurgical observation, revealed that the material degradation in the thermally aged steel was caused by precipitation of carbides on the grain boundaries. While the weld metal showed the lowest mechanical properties among various microstructures in GTA weldments. By combining SP test and XRD analysis, cryogenic fracture behaviors and aging degradation for high nitrogen steel could be successfully evaluated in nondestructive manner.

• Journal of the Korean Society of Food Culture
• /
• v.12 no.1
• /
• pp.63-69
• /
• 1997

This study was carried out in order to analyzed the changes in nitrogen containing taste compounds of three different types of traditional Korean soy sauce with varing ripening period, and to investigates correlation between sensory characteristics and taste compounds contents via contents assay and sensory evaluation of soy sauce samples. Total nitrogen, ammonia type nitrogen and amino type nitrogen contents showed the highest value in Kyupjang. 17 kinds of free amino acid was detected in Chungjangs and 16 kinds of free amino acid was detected in Kyupjang. Nucleotides and their related compounds detected were hypoxanthin, xanthin, IMP, AMP, Inosine, ADP. Free amino acid and nucleotides and their related compounds contents were highest in Kyupjang. Nitrogen related compounds content of high concentration soy sauce ripened over 150 days increased similarly with Kyupjang. In the sensory evaluation of soy sauce taste, Chungjang samples acquired the highest score in the offensive taste test while Kyupjang marked highest score for sweet taste, nutty taste, taste preference. High concentration soy sauce ripend over 150 days yielded the result similar to that of Kyupjang. Sweet taste showed positive correlation with nitrogen compounds. The materials that showed positive correlation with nutty and traditional soy sauce taste and taste preference were nitrogen compound, IMP, AMP. Except for tryptophan, all free amino acid showed positive correlation with nutty and traditional soy sauce taste. Particulary, taste preference correlated to lysine, aspartic acid and glutamic acid.