• 제목/요약/키워드: Nitrogen Supply System

검색결과 121건 처리시간 0.03초

플라스크 배양에서 Chlorella sp. KR-1의 균체 성장 및 지질 생산에 대한 질소원 및 유기탄소원의 영향 (Effects of nitrogen and organic carbon sources on growth and lipid production of Chlorella sp. KR-1 in flask cultures)

  • 이자연;서경애;오유관
    • 한국해양바이오학회지
    • /
    • 제6권2호
    • /
    • pp.110-117
    • /
    • 2014
  • Recently microalgae have been proposed as a promising biodiesel feedstock, owing to their higher lipid productivity and non-arable land based cultivation system. Biomass and lipid productivities of microalgae are largely affected by various environmental and nutritional factors. In this study, the effects of nitrogen (nitrate and ammonium) and organic carbon (glucose and glycerol) sources on the cell growth and lipid production of Chlorella sp. KR-1 were examined in flask cultures. Under autotrophic culture conditions for 15 days, overall cell growth and lipid (fatty acid methyl ester, FAME) production with nitrate were better than those of ammonium, resulting in 1.06 g cell/L and 333 mg FAME/L, respectively. Maximal intracellular lipid contents (348 - 352 mg FAME/g cell) were observed at low concentrations of 1 mM for both nitrate and ammonium. In the supply of light, addition of glucose in the range of 1 - 20 g/L showed higher cell densities than the autotrophic cell growth condition. Higher lipid accumulation of 375 mg FAME/g cell could achieved at 5 g glucose/L albeit of relatively short incubation of 7 days. With glycerol, intracellular lipid contents were ~1.9 times lower than glucose cases although similar cell growths were observed for both carbon sources.

가압제어용 둥근 유입형 오리피스 특성 (Rounded Entry Orifice Characteristics for Pressurization Control)

  • 정용갑;권오성;장제선;신동순;한상엽
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.401-404
    • /
    • 2008
  • Pressurization system in a liquid-propellant launcher supplies the controlled gas into the ullage volume of propellant tanks to feed propellants to combustion chamber by pressurizing propellants stored in propellant tanks. The ullage part of propellant tank should be constantly pressurized to supply the propellants stored in propellant tanks to turbo-pump or combustion chamber by pressurant pressurization system. Pressurant used to pressurize propellants is generally stored in a series of tanks at cryogenic temperature and high preassure inside an oxidizer tank. The reason is to store the quantity of pressurant as much as possible and to make pressurant tanks as small as (i.e. as light as) possible. However for test convenience pressurant tank is located at STP (standard temperature and pressure) environment in this study. Orifices are widely adapted to several pressurization systems in liquid rocket propulsion systems. Discharge coefficients of orifices are essentially needed for the optimized design of pressurization system in liquid rocket propulsion system. For this study gaseous nitrogen was served as pressurant and rounded entry orifices were employed. The forty-two (42) rounded entry orifices (the radii of curvatures are 0.5 and 1.0) have been tested experimentally in the supersonic flow region. The discharge coefficients of rounded entry orifices with inside diameters ranging from about 1.4 to 5.0mm was measured with 0.95 ${\sim}$ 0.99.

  • PDF

LNG 냉열을 이용한 공기액화분리시스템의 시뮬레이션 및 공정 해석 (Process Analysis and Simulation for System of Air Liquefaction Separation Using LNG Cold Energy)

  • 한단비;백영순
    • 한국수소및신에너지학회논문집
    • /
    • 제30권3호
    • /
    • pp.276-281
    • /
    • 2019
  • The process of separating oxygen and nitrogen from the air is mainly performed by electric liquefaction, which consumes a lot of electricity, resulting in higher operating costs. On the other hand, when used for cold energy of LNG, electric power can be reduced compared to the electric Linde cycle. Currently, LNG cold energy is used in the cold refrigeration warehouse, separation of air-liquefaction, and LNG cold energy generation in Japan. In this study, the system using LNG cold energy and the Linde cycle process system were simulated by PRO/II simulators, respectively, to cool the elevated air temperature from the compressor to about $-183^{\circ}C$ in the air liquefaction separation process. The required amount of electricity was compared with the latent heat utilization fraction of LNG, the LNG supply pressure, and the LNG cold energy usage. At the air flow rate of $17,600m^3/h$, the power source unit of the Linde cycle system was $0.77kWh/m^3$, compared with $0.3kWh/m^3$.

질소공급, 고추의 생육 및 수량에 대한 녹비작물 환원 효과 (Effects of Green Manure Crops, Hairy vetch and Rye, on N Supply, Redpepper Growth and Yields)

  • 성좌경;이상민;정정아;김종문;이용환;최두회;김태완;송범헌
    • 한국토양비료학회지
    • /
    • 제41권4호
    • /
    • pp.247-253
    • /
    • 2008
  • 동계녹비작물의 활용은 친환경농업을 위한 유용한 방법중의 하나이다. 고추 수량, 질소흡수, 탄수화물 합성 및 토양 질소공급에 대한 두과(헤어리베치) 및 화본과(호밀) 녹비작물의 효과를 조사하였다. 녹비작물로부터 무기화된 질소는 토양환원 후 30일경에 최대치에 도달하였으며, 무기태 질소의 양은 $645mg\;kg^{-1}$ (헤어리베치) 및 $237mg\;kg^{-1}$ (호밀) 이었다. 토양 환원된 헤어리베치로부터 무기화된 질소의 양은 화학질소 ($365mg\;kg^{-1}$)보다 높았는데 이는 헤어리베치의 투입량이 질소기준으로 약 2배였기 때문인 것으로 판단된다. 광합성량과 탄수화물 합성은 정식 후 70일까지 처리간에 큰 차이를 보이지 않았지만, 생육후기 호밀처리구의 고추 광합성량과 탄수화물 합성량(전분)이 다소 감소하는 경향을 보였다. 두과녹비작물인 헤어리베치가 호밀에 비해 고추의 생육 및 수량에 큰 영향을 미치는 것으로 나타나, 향후 고추재배시 헤어리베치의 화학비료 대체효과는 클 것으로 사료된다.

Hybrid MBE Growth of Crack-Free GaN Layers on Si (110) Substrates

  • 박철현;오재응;노영균;이상태;김문덕
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.183-184
    • /
    • 2013
  • Two main MBE growth techniques have been used: plasma-assisted MBE (PA-MBE), which utilizes a rf plasma to supply active nitrogen, and ammonia MBE, in which nitrogen is supplied by pyrolysis of NH3 on the sample surface during growth. PA-MBE is typically performed under metal-rich growth conditions, which results in the formation of gallium droplets on the sample surface and a narrow range of conditions for optimal growth. In contrast, high-quality GaN films can be grown by ammonia MBE under an excess nitrogen flux, which in principle should result in improved device uniformity due to the elimination of droplets and wider range of stable growth conditions. A drawback of ammonia MBE, on the other hand, is a serious memory effect of NH3 condensed on the cryo-panels and the vicinity of heaters, which ruins the control of critical growth stages, i.e. the native oxide desorption and the surface reconstruction, and the accurate control of V/III ratio, especially in the initial stage of seed layer growth. In this paper, we demonstrate that the reliable and reproducible growth of GaN on Si (110) substrates is successfully achieved by combining two MBE growth technologies using rf plasma and ammonia and setting a proper growth protocol. Samples were grown in a MBE system equipped with both a nitrogen rf plasma source (SVT) and an ammonia source. The ammonia gas purity was >99.9999% and further purified by using a getter filter. The custom-made injector designed to focus the ammonia flux onto the substrate was used for the gas delivery, while aluminum and gallium were provided via conventional effusion cells. The growth sequence to minimize the residual ammonia and subsequent memory effects is the following: (1) Native oxides are desorbed at $750^{\circ}C$ (Fig. (a) for [$1^-10$] and [001] azimuth) (2) 40 nm thick AlN is first grown using nitrogen rf plasma source at $900^{\circ}C$ nder the optimized condition to maintain the layer by layer growth of AlN buffer layer and slightly Al-rich condition. (Fig. (b)) (3) After switching to ammonia source, GaN growth is initiated with different V/III ratio and temperature conditions. A streaky RHEED pattern with an appearance of a weak ($2{\times}2$) reconstruction characteristic of Ga-polarity is observed all along the growth of subsequent GaN layer under optimized conditions. (Fig. (c)) The structural properties as well as dislocation densities as a function of growth conditions have been investigated using symmetrical and asymmetrical x-ray rocking curves. The electrical characteristics as a function of buffer and GaN layer growth conditions as well as the growth sequence will be also discussed. Figure: (a) RHEED pattern after oxide desorption (b) after 40 nm thick AlN growth using nitrogen rf plasma source and (c) after 600 nm thick GaN growth using ammonia source for (upper) [110] and (lower) [001] azimuth.

  • PDF

논산지역 마을상수도 수질의 수리지화학 및 통계 분석 (Hydrogeochemistry and Statistical Analysis of Water Quality for Small Potable Water Supply System in Nonsan Area)

  • 고경석;안주성;석희준;이진수;김형수
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제13권6호
    • /
    • pp.72-84
    • /
    • 2008
  • 본 연구는 논산지역 마을상수도를 대상으로 수질 모니터링, 수리지화학적 고찰 및 다변량 통계분석을 통하여 수질에 관한 문제점과 원인을 규명하고 타당한 관리 방안을 마련하고자 수행되었다. 논산지역은 마을상수도 이용이 많은 전형적인 농촌지역으로 지질은 화강암이 가장 넓은 면적을 차지하며 옥천대 변성퇴적암, 편마암과 화산암이 분포한다. 마을상수도의 수질 모니터링 결과 전국 평균인 2.5%보다 5-8배 높은 13-21% 정도가 수질기준을 초과하였으며 주요 오염성분은 질산성질소, 탁도, 총대장균, 일반세균, 불소 및 비소로 조사되었다. 연구지역 남쪽과 북쪽에서 높게 나타나는 질산성질소 오염의 주요 원인으로서 비닐하우스 같은 시설영농의 영향이 가장 큰 것으로 나타났다. 마을상수도 수질은 Ca와 $HCO_3$가 지배적이나 화강암 지역에서는 농경지와 주거지 등의 인위적인 오염의 영향으로 Na, Cl 및 $NO_3$가 증가되었다. 주성분분석 결과 주로 농경과 인위적 오염의 영향을 나타내는 주성분 2에 의하여 크게 두 개의 그룹인 화강암과 편마암 및 옥천대 지하수로 구분된다. 판별분석은 초기 지질분류와 판별분석 예측결과의 오차가 5.56%로서 주성분분석보다 더 명확하게 각 지질별 지하수 특징을 보여준다. 다변량 통계분석은 수리지화학적 특성의 종합적 분석을 가능하게 하여 지질특성에 의한 지하수 수질의 변화를 명확하게 구분할 수 있는 방법으로 사료되었다. 논산시 마을상수도 수질에 대한 연구결과는 지질에 의해 영향받는 토지이용, 토양 특성 및 지형 등이 복합적으로 작용하여 지하수 수리지화학적 특성을 결정하는 것임을 확인하였다. 따라서 향후 정부 및 지자체의 마을상수도관리는 지질, 토지이용, 지형 및 토양 특성 등에 대한 종합적 자료 구축 및 해석이 필요하다.

Interrelation between N and S Nutrition on Accumulation of Storage Protein in Soybean Seed

  • Paek, Nam-Chon;Richard Shibles
    • Plant Resources
    • /
    • 제1권2호
    • /
    • pp.113-120
    • /
    • 1998
  • Soybean is an important crop because its seed has very high protein relative to others. The quality of soy protein is limited by the concentration of the sulfur-containing amino acids in the amino acid profile. Among the supply of various forms of 0.4mM sulfur as S nutrition during seed fill. only 0.4mM L-methionine can inhibit ${\beta}$-subunit synthesis completely and produce the highest glycinin-containing seeds. Compared to 0.4mM sulfate control, seeds supplied by 0.4mM L-methionine have lower ${\alpha}$-, no ${\beta}$-subunit, and highly increased glycinin without altering total protein concentration. Supply of 0.2mM cystine (0.4mM S) did not affect the accumulative pattern of seed storage protein (SSP) subunits. In the supply of L-methionine, 0.2mM treatment showed higher glycinin in seeds but 0.05mM resulted in lower glycinin than tile sulfate control. The relative abundance of ${\alpha}^`$-subunit was not altered by any N or S nutrition. Under 5mM nitrogen, protein concentration was increased about 3-5% by substituting ammonia for nitrate during seed fill independent of nutrition. The increase resulted in the only increase of 7S protein, mainly ${\beta}$-subunit. Our data suggest that the regulatory system of SSP genes responds to the balance between N and S assimilates supplied from mother plant. and controls the di fferential synthesis of their subunits for the maximum protein accumulation in developing soybean seed.

  • PDF

논의 밭전환 연차간 우분시용에 의한 질소공급 및 밭사료 작물의 생산력 변화 (Changes of Soil Nitrogen Supply and Production of Upland Forage Crops by Cattle Manure during Conversion from Paddy to Upland Condition in Paddy Field)

  • 서종호;김석동
    • 한국작물학회지
    • /
    • 제50권6호
    • /
    • pp.387-393
    • /
    • 2005
  • 2002년부터 2004년까지 수원의 작물과학원 논포장을 년차간 순차적으로 밭으로 전환하고 또 밭상태에서 우분을 누적투 입하면서 호밀과 옥수수의 윤작을 통하여 질소와 관련된 토양 특성, 작물의 건물수량 및 질소흡수량을 조사하였는데, 주요 결과는 다음과 같다. 논의 밭전환 1년차에는 밭사료작물, 특히 답리작 호밀의 생육과 수량이 현저히 감소하였으며, 그에 따라 우분시용에 의한 무기태질소 등 양분의 이용효율도 현저히 감소하였다. 그러나 전환년차의 증가와 함께 밭사료작물의 수량과 질소흡수량이 증가하였는데, 특히 밭상태에서 전환3년차까지 우분의 누적투입은 토양에의 무기태 질소공급과 더불어 옥수수의 수량, 질소흡수량 및 우분질소 이용률을 계속적으로 증가시켰다. 그 증가는 전환년차 증가에 따른 논토양 자체의 질소공급보다는 주로 우분시용에 의한 토양물리성 개선, 토양탄소 및 무기화 가능한 지력질소(가급태질소) 증가 등 지력증진에 크게 기인하였다. 따라서 전환밭에서 정상적인 밭사료작물의 수량을 얻기 위해서는 전환2년 이상의 기간이 필요하였으며, 이때 우분의 투입은 토양에 무기태질소 공급뿐만아니라 토양유기물 등 지력증진에도 효과적이었으며, 또한 그것이 누적적으로 투입될 때 그 효과가 증가되는 것으로 나타났다.

Squeeze Film Dampers for High Temperature Superconducting Radial Magnetic Bearings

  • Na, Uhn-Joo;Choi, Sang-Kyu;Sung, Tae-Hyun;Han, Young-Hee
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문집
    • /
    • pp.399-403
    • /
    • 2002
  • Squeeze film dampers (SFDs) are designed and analyzed for radial superconducting bearings. The designed SFDs are mounted on the superconductors submerged in liquid nitrogen such that the dampers should supply additional damping to the relatively underdamped superconducting bearing support . Basic theory of SFD assembled with superconductors is introduced. Rotordynamic simulations are provided to support the feasibility of the superconducting bearings mounted on SFDs for a horizontal flywheel energy storage system.

  • PDF

반경방향 고온초전도베어링의 Squeeze Film 댐퍼 설계 (Squeeze Film Dampers for High Temperature Superconducting Radial Magnetic Bearings)

  • Na, Uhn-Joo;Park, Sang-Kyu;Sung, Tae-Hyun;Han, Young-Hee
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.343.2-343
    • /
    • 2002
  • Squeeze film dampers(SFDs) are designed and analyzed for radial superconducting bearings. The designed SFDs are mounted on the superconductors submerged in liquid nitrogen such that the dampers should supply additional damping to the relatively underdamped superconducting bearing support. Basic theory of SFD with superconducting bearing are introduced. Rotordynamic simulations are provided to support the feasibility of the superconducting magnetic bearings mounted on SFDs for a horizontal flywheel energy storage system.

  • PDF