• 열처리공학회지
• /
• 제11권2호
• /
• pp.99-110
• /
• 1998

The effects of pre-heat treatment(Q/T) on microstructure and hardness of SCM435 structural steel nitrided by micro-pulse plasma was investigated. The quenching and tempering temperatures for obtaining matrix hardness of SCM435 steel on range of HRC30 to HRC40 desired for machine parts were about $860^{\circ}C$ and $500^{\circ}C$ respectively. The case depth of SCM435 nitrided at $480^{\circ}C$ for 5 hours was independent of pre-heat treatment condition and was approximately $150{\mu}m$. However, hardness and compactness of nitrified layer on Q/T treated specimen were more heigher than annealed specimen. The case depth increased linearly with the increase of nitriding temperature, however, the hardness of nitrified layer decreased with the temperature. Phase mixture of ${\gamma}^{\prime}$-phase($Fe_4N$) and ${\varepsilon}$-phase($Fe_3N$) were detected by XRD analysis in the nitrified layer formed at optimum nitriding condition, and only single ${\gamma}^{\prime}$-phase was detected in the nitrified layer formed at higher nitriding temperature such as $540^{\circ}C$. The optimum nitriding temperature was approximately $480^{\circ}C$ which is lower than tempering temperature for preventing softening behavior of SCM435 matrix during nitriding process and the surface hardness of nitrified layer obtained by optimum preheat treatment condition was about Hv930.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.142-147
• /
• 1998

Rotary bending fatigue tests were carried out on the nitrided titanium in order to investigate the effect of nitriding layer on fatigue limit. Main results obtained are as follows. (1) The fatigue limit of nitrided pure titanium is remarkably reduced because of enlargement of grain size at high heat treating temperature and high stress field created from the elastic interaction in the compound layer. (2) Further test using specimen which was removed nitrified layer gradually, were also conducted and it was found that by removing the compound layer the fatigue limit recovered as the level of basic material and rather increased by coming of a diffusion layer. Therefore it is concluded that the surface compound layer generated by nitriding treatment reduced the fatigue limit but diffusion layer increased it.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1063-1067
• /
• 2001

The effect of the pulse parameters(pulse ratio and frequency) on the characteristics of the nitrided layer in the pulsed plasma nitrified SCM435 Steels was investigated. Material properties of the nitrided layer were analysed by employing optical microscope, scanning electron microscope(SEM), X-ray diffractometer(XRD) and micro-Vickers hardness tester. It was found that both the compound layer thickness and the surface hardness decreased with decreasing of pulse ratios. At high pulse ratio, the compound layer thickness and the surface hardness were rapidly decreased with decreasing frequency compared to lower pulse ratios.

• 상하수도학회지
• /
• 제17권4호
• /
• pp.487-494
• /
• 2003

In this research, water qualities of river water and bank-filtrate were compared for six months including winter season. The location studied was Galjon area, the downstream of the Nakdong river. The well for bank-filtrate was installed 40 m apart from riverside. Main analytic results of bank-filtrate and river water were summarized as followings; the average concentrations in bank-filtrate were turbidity 0.8NTU, TN 0.4mg/l, $BOD_5$, 0.1mg/l, $KMnO_4$ consumption 1.6mg/l, heterotrophic bacteria 350cfu/ml, Fe 0.5mg/l, Mn 0.99mg/l while the average concentrations in river water were turbidity 6.1NTU, TN 3.9mg/l, $BOD_5$, 3.6mg/l, $KMnO_4$ consumption 11mg/l, heterotrophic bacteria 1,640cfu/ml, Fe 0.28mg/l, Mn 0.04mg/l. Water quality of bank-filtrate was mostly shown a good results than it of river water excepting Fe and Mn. In even basic constituents such as water temperature and pH, bank-filtrate was very settled while river water was extraordinary changable and high. In case of nitrogen, especially, total nitrogen of river water was 3.9mg/l while it of bank-filtrate was 0.4mg/l and its reduction was very high. The reason is that $NH^+_4-N$ among total nitrogen in the river water is nitrified and then denitrified in soil layer when it is pumped up as bank-filtrate. But Fe and Mn caused by the characteristics of soil was very high in bank-filtrate while Mn in river water was particularly very low and settled. As the distance between riverside and well was longer, concentration of Fe and Mn may be went up while its bacteria may be reduced.

• 대한환경공학회지
• /
• 제22권11호
• /
• pp.1995-2005
• /
• 2000

황-이용 탈질시 요구되는 알칼리도를 공급하기 위해 종속영양탈질을 동시에 이용하는 방안(종속/독립 동시탈질)의 가능성을 검토하였다. 이를 위해 $35^{\circ}C$에서 운전된 황 충전상 반응조에 $NO_3{^-}-N$ 및 $COD_{Cr}$이 각각 700~900 및 900~2500mg/L인 질산화된 침출수를 주입하며 종속/독립 동시탈질시 첨가된 외부탄소원의 종류 및 농도, 그리고 HRT가 탈질효율에 미치는 영향을 파악하였다. 종속/독립 동시탈질시 알칼리도 공급량을 0으로 유지하기 위해 종속영양탈질에 의해 제거되어야 하는 $NO_3{^-}-N$분율($HDNR_{fraction}$)은 탄소원별로 차이를 나타내었다. 메탄올과 아세트산 나트륨의 경우 이론적인 $HDNR_{fraction}$ 값에서 100%의 탈질효율을 얻었으나 글루코스와 당밀의 경우 이론치보다 높은 $HDNR_{fraction}$ 값이 필요하였다. 대부분의 탈질반응은 반응조 하단 11.5cm에서 완료되었으며, 이를 기준으로 계산한 종속/독립 동시탈질시 100% 탈질효율을 얻을 수 있는 EBCT와 용적부하는 각각 6.76 h와 $2.84kg-NO_3{^-}-N/m^3{\cdot}d$이었고, 최대 탈질율은 처리효율 89%에서 $5.05kg-NO_3{^-}-N/m^3{\cdot}d$이었다. 그러나 짧은 EBCT에서는 종속 영양균의 과도한 성장에 의한 반응조의 막힘현상이 발생하였는 바, 이는 역세척 또는 종속영양탈질과 황-이용 탈질의 분리운전 등의 대안으로 해결할 수 있을 것이다.