• 약학회지
• /
• 제45권1호
• /
• pp.116-124
• /
• 2001

Nitric oxide is a labile, gaseous, broad spectrum second messenger that used in various tissues and cells. If it is induced by endogenously and exogenously in the neuronal cells, it is able to mediate analgesia or hyperalgesia at the periphery and in the spinal level respectively. This dual role of nitric oxide in the sensory system is very intriguing but has not been fully understood yet. In this experiment, acetylcholine (300 $\mu$g/paw), sodium nitroprusside (600 $\mu$g/paw), and L-arginine (300 $\mu$g/paw) represented antinociceptive effect to noxious topical stimulus, but pronociceptive responses followed by spinally application (20$\mu$g/5$\mu$l, 10$\mu$g/3$\mu$l, 500$\mu$g/5$\mu$l respectively). Calcium ion is critical element which activates nitric oxide synthase, therefore verapamil (300 $\mu$g/paw) and NOS inhibitor (20 mg/kg, L-NAME or L-NOArg) are injected into right hind paw (i.pl.). When verapamil is combined with NOS inhibitors analgesic effects through NO-cGMP pathway are inhibited as compared with ACh alone. Diluted formalin (2.5%), when injected into rats'hind paw (0.05 ml), elicited a biphasic algesic responses and nitric oxide had an analgesic effect on both $A\delta$ and C sensory nerve fibers which manipulate the phases respective1y. Nitric oxides, which produced from constitutive nitric oxide synthase, activated cyclooxygenase-type I and then prostaglandins are produced from them. So, indomethacin and ibuprofen, inhibitors of COX$_1$enzyme, when pretreated intraperitoneally (100 mg/kg) could reduce the hyperalgesic state. From these results, it is possible to imagine that the intrathecally administered NO donors expressed hyperalgesia through both long-term potentiation mechanism and arachidonic acid-prostaglandin cascade.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.277-289
• /
• 2003

This study proposes a mathematical model to characterize the removal of nitrogen oxides in a dielectric barrier discharge plasma process. As well as the reactions between nitrogen oxides, water vapor, oxygen and nitrogen, the model takes into account the effect of ethylene often used as a chemical additive to reduce the power consumption of the process on the removal of nitrogen oxides. Since the concentrations of the radicals concerned in the main reactions including O, OH, H and N should be calculated to predict the removal efficiency of nitrogen oxides, they were theoretically derived. The parameters affecting the removal of nitrogen oxides, such as initial concentration, discharge power, humidity, and ethylene concentration were experimentally evaluated, which were compared with the calculated results to verify the validity of the model proposed. The predicted concentrations of several byproducts formed in this process were also presented and discussed. The effects of several parameters mentioned above on the removal of nitrogen oxides were reasonable described by the proposed model.

• 공업화학
• /
• 제21권3호
• /
• pp.243-251
• /
• 2010

연소배가스에 존재하는 질소산화물의 제거를 위해서는 촉매 환원, 흡수, 흡착 등 화학적 기술이 적용되고 있는데, 장기적으로는 환경친화적이고 에너지 소모가 적은 생물학적 공정의 개발 및 이용이 필요하다. 본 논문에서는 연소 배가스에 존재하는 질소산화물을 제거하기 위한 생물학적 공정의 기술동향을 살펴보고 각각의 장단점을 고찰하였다. 질산화와 탈질 기작을 이용하는 박테리아 시스템과 광합성 미세조류를 이용하는 시스템으로 구분하여 기술의 원리와 현재의 기술 수준을 논하였다. 두 경우 모두 처리속도를 높이기 위해서는 불용성의 일산화질소를 일단 적절한 흡수제에 고농도로 포집시킨 후 미생물에 의하여 분해 또는 고정하는 방향이 바람직하며, 배가스 중 $CO_2$와 NOx를 동시에 고정이 가능하고 별도의 탄소원이 요구되지 않는 미세조류의 활용이 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.774-779
• /
• 2012

MILD(Moderate and Intense Low Oxygen Dilution) 연소는 연소 가스의 재순환을 이용하여 고온 형성을 최대한 억제하고 질소산화물의 발생을 저감하는 동시에 연소로의 내부 온도 균일화를 통한 열 이용 효율을 향상시킬 수 있는 연소기술이다. 본 연구에서는 원추형 연소로에서 연료 유량은 고정하고 공기 유량으로 당량비(${\Phi}$)를 조절하고 배기가스를 측정하여 MILD 연소특성을 도출하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.121-123
• /
• 2003

• 대한치과보철학회지
• /
• 제45권5호
• /
• pp.589-600
• /
• 2007

Statement of Problem: Titanium has many advantages of high biocompatibility, physical porperties, low-weight, low price and radiolucency, but it is incompatible with conventional dental porcelain due to titanium's oxidative nature. Many previous studies have shown that they used the method of sandblast surface treatment prior to porcelain application, the researchs are processing about the method of acid etching or surface coating. Purpose: The purpose of this research is to study the effect on bond strength between titanium and porcelain when using macro-surface treatment and micro-surface treatment and macro and micro surface treatment. Material and method: In this study, we evaluated the bond strength by using 3-point bending test based on ISO 9693 after classified 7 groups-group P : polished with #1200 grit SiC paper, group SS : sandblasted with $50{\mu}m$ aluminum oxides, group LS : sandblasted with $250{\mu}m$ alumium oxides, group HC : treated with 10% hydrochloric acid, group NF : treated with 17% solution of fluoric acid and nitric acid, group SHC : treated with 10% hydrochloric aicd after sandblsting with $50{\mu}m$ alumium oxides, group SNF treated with 17% solution of fluoric acid and nitric acid. Results : Within the confines of our research, the following results can be deduced. 1. Group SS which was sandblasted with $50{\mu}m$ aluminum oxides showed the highest bond strength of 61.74 MPa and significant differences(P<0.05). The bond strengths with porcelain in groups treated acid etching after sandblasting decreased more preferable than the group treated with sandblasting only. It gives significant differences(P<0.05). 2. After surface treatments, the group treated with sandblasting showed irregular aspect formed many undercuts, in the SEM photographs. The group treated with hydrochloric acid had the sharp serrated surfaces, the group treated with the solution of fluoric acid and nitric acid had the smooth surfaces, the group with sandblasting and hydrochloric acid had irrigular and porous structure, the group with sandblasting and the solution of fluoric acid and nitric acid had crater-like surfaces. But all of the groups treated with acid etching was not found and undercut. Conclusion: In above results, average surface roughness increase, bond strength also increase, but surface topographs influences more greatly on bond strengths.

• 대한환경공학회지
• /
• 제32권2호
• /
• pp.209-218
• /
• 2010

감전동 측정소에서 측정한 일반대기의 휘발성유기화합물 중 방향족화합물이 전체의 51.3%로 가장 높은 농도를 나타내었고 다음이 paraffin류(44.2%), olefin류(2.7%), alkyne류(1.8%)의 순이었으며 대연동 측정소는 paraffin류가 전체의 56.7%를 나타내어 가장 높았으며 다음이 aromatic류(35.9%), olefin류(6.1%), alkyne류(1.3%)순으로 조사되었다. POCP를 고려한 오존생성 기여도는 toluene이 30.6%로 가장 높았으며 그 다음으로 propane, m/p-xylene, ethylbenzene, 1,2,4-trimethylbenzene이 각각 10.2%, 9.4%, 7.4%, 5.2%로 높았다 상위 5가지 물질의 기여도가 전체의 62.8%로 다른 물질들의 기여도 보다 비교적 높은 것으로 나타났다. 한편 상위 32종의 VOCs가 전체 VOCs중 97.6%로 조사되어 나머지 14개 VOCs물질의 오존생성 기여율은 미미한 것으로 조사되었다. 고농도 오존이 발생한 시점과 $NO_2$/NO의 비의 시간 변화율이 바뀌는 시점은 대체적으로 아주 유사한 현상을 보였다. 이것은 고농도 오존과 광화학적 현상이 밀접한 관계를 보인다는 것을 간접적으로 시사한다. NO의 $NO_2$로의 전환이 오존의 고농도 현상에 중요한 역할을 하고 있다는 것을 알 수 있다.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.68-75
• /
• 2001

In this paper, a number of supported metal oxides and perovskite type catalysts were investigated for the NOx reduction from the diesel engine exhaust gas. All catalysts were made into pellets type with diameter of 3-4 mm alumina(Al$_2$O$_3$) as a supporter. These samples were tested by real diesel exhaust gas which contains CO, hydrocarbons and soot in the temperature range of 150~55$0^{\circ}C$ with the $3300h^{-1}$ space velocity (SV). Among the results, several promising catalysts showed NOx conversion above 50% in the temperature range of 150-35$0^{\circ}C$. From these results supported metal oxides catalysts and perovskite type could be recommended for the practical application to the automobile exhaust treatments.

• 한국대기환경학회지
• /
• 제26권3호
• /
• pp.330-338
• /
• 2010

In this study, removal characteristics of nitrogen oxides $(NO_x)$ from road transport by using peat as the packing media for biodegradation have been investigated in the long term. Physicochemical and biological treatment of peatmixed media eliminates any requirement to use chemical substances and also facilitates the biodegradable actions of microorganism. Safe biodegradation of pollutants, no need to apply additional microbes owing to their active growth, and no generation of secondary pollutants were found in this experiment. It was concluded that average removal efficiencies of nitric oxide (NO) and nitrogen dioxide $(NO_2)$ were 80% and 97% respectively with respect to the linear velocity 35~40 mm/s and 0.3 ppm ozone concentration in the long period operation. Inflow concentration of nitric oxide over 0.05 ppm was suitable when pretreated with ozone. Non-ozone stage was performed with linear velocity 20~100 mm/s and then the average removal efficiency of nitric oxide and nitrogen dioxide were 38% and 94% respectively. Other results showed that the apparent static pressure was raised with increases in applied water content and aerial velocity in mixed media during fan operation.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3243-3250
• /
• 1996

Emission characteristics of nitric oxides and carbon monoxide from a porous media combustor has been experiment studied. The relationship between the change of flame shape and emission has also been examined. As the equivalence ratio decreases, the flame shape on the ceramic matrix plate changes from a diffusion flame, R(radiant)-type flame, to B(Blue)-type flame. With large fuel flow rate, R-type flame turns to be two dimensional R-II type flame around the equivalence of 0.7. Carbon monoxide emission increases very rapid with decreasing equivalence ratio. It changes a lot from some 10 ppm to 100-10,000 ppm with the change of flame type from R-I to R-II type. Nitric oxide emission from the premixed burner is less than 25 ppm over all range of fuel flow rate, which is less than 20% of NOx emission from conventional gas burners.