• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권3호
• /
• pp.88-94
• /
• 2016

The simultaneous biodegradation between MTBE (Gasoline additives) and BTEX (Benzene, Toluene, Ethyl-benzene, o-Xylene, m-Xylene, p-Xylene) was achieved within a competitive inter-relationship, with not only electron accepters such as nitrate, sulfate, and iron(III) without oxygen, but also with electron donors such as MTBE and BTEX. Preexisting indigenous microorganisms from a domestic sample of gasoline contaminated soil was used for a lab-scale batch test. The result of the test showed that the biodegradation rate of MTBE decreased when there was co-existing MTBE and BTEX, compared to having just MTBE present. The growth of indigenous microorganisms was not affected in the case of the MTBE treatment, whereas the growth of the microorganisms was decreased in combined MTBE and BTEX sample. This may indicate that an inhibitor related to biodegradation when BTEX and MTBE are mixed will be found. This inhibitor may be found to retard the anaerobic conditions needed for efficient breakdown of these complex carbon chain molecules in-situ. Moreover, it is also possible that an unknown competitive reaction is being imposed on the interactions between MTBE and BTEX dependent on conditions, ratios of mixture, etc.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.386-392
• /
• 2020

3D 프린팅 콘크리트는 연속 적층 시 적층고가 높아짐에 따라 콘크리트의 자중이 증가되기 때문에 연속 적층성 확보를 위해 하단부 콘크리트가 적정 시간에 경화되어야 한다. 특히, 기온이 낮은 동절기의 경우 콘크리트의 경화속도가 늦어지게 되는데, 3D 프린팅 콘크리트 시공 중 하단부 콘크리트의 강도발현이 낮아 콘크리트의 자중을 버티지 못하게 되면 적층된 콘크리트가 무너지게 되는 문제가 발생된다. 이러한 문제점을 해결하기 위해서는 저온환경에서의 3D 프린팅 콘크리트의 초기강도를 증진이 필수적이다. 국내외 문헌에서는 Amine계, Nitrate계, Sodium계, Calcium계 등의 무기계 화학 첨가제를 사용하여 콘크리트의 초기강도를 증진시킨 사례가 보고되고 있다. 이에 본 연구에서는 Amine계, Nitrate계 및 Sodium계 조강형 첨가제 샘플 5종을 제작하여 그 성능을 평가하였고, 우수한 성능을 보인 샘플을 선별하여 이를 적용한 3D 프린팅 콘크리트의 초기강도 특성을 확인하였다. 그 결과 Nitrate계 첨가제 사용 시 10 ℃ 환경에서 기존 20 ℃ 환경의 3D 프린팅 콘크리트 배합대비 동등 이상의 초기강도 발현이 가능한 것을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3209-3212
• /
• 2014

This paper describes a selective synthetic method of fabricating Ag nanowires by using a modified polyol process. To synthesize the Ag nanowire, an ethylene glycolic solution of silver nitrate and an ethylene glycolic solution of polyvinylpyrrolidone solution containing a small amount of organic oxidant, 1,4-benzoquinone, were slowly added to a hot ethylene glycol medium at $160^{\circ}C$ for 8 min using a syringe pump. The reaction mixtures were heated for an additional 45 min and cooled to room temperature. Finally, the silver nanomaterials were isolated from the mixture by centrifugation. The crystal structure of the nanomaterials was investigated by powder X-ray diffraction analyses, and their morphology was investigated by scanning electron microscopy. A small amount of organic oxidant, 1,4-benzoquinone, played a significant role in controlling the morphology during crystal growth. Consequently, Ag nanowires rather than Ag nanoparticles were selectively obtained.

• 전기화학회지
• /
• 제6권4호
• /
• pp.271-281
• /
• 2003

The present article is concerned with pitting corrosion of Inconel alloy 600 at elevated solution temperatures. This article first summarized the previous works on the characteristics and the growth models of oxide film grown on alloy 600 at elevated solution temperatures. Thereafter, this article reviewed previous works on the morphological study on pitting corrosion of alloy 600 as functions of solution temperature and such anion additives as thiosulphate, sulphate, nitrate and bicarbonate ions in terms of pit morphology and its fractal dimension.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1225-1226
• /
• 2006

Particles of high strength material when coated with silver offer a means of obtaining desirable electrical properties and high strength. The coating process employed aqueous ammoniacal silver-nitrate electrolytes with a formaldehyde solution as the reductant. Modifying additives were also applied. The reduction and subsequent deposition of silver occurred selectively on the surface of the tungsten particles. The morphologies of the coated particles were assessed by SEM imaging. The silver was uniformed coated on tungsten powder and its thickness was estimated to be approximately 100nm on the basis of a mass account.

• 한국항해항만학회지
• /
• 제36권6호
• /
• pp.459-463
• /
• 2012

본 연구에서는 연안어장 준설퇴적물에 대한 영양염류(인공수 중 질산염과 인산염)의 흡착반응에서 흡착제, pH, 이온강도가 미치는 영향을 살펴보았다. 그리고 준설퇴적물을 이용해서 영양염류를 제거할 수 있는 가능성을 평가하고자했다. ${NO_3}^-$-N($100{\mu}M$, 10mM), ${PO_4}^{3-}$-P($100{\mu}M$, 10mM)에 대한 흡착반응은 10분 이내에 완료되었고, 정상상태에서 $100{\mu}M$ ${NO_3}^-$-N과 $100{\mu}M$ ${PO_4}^{3-}$-P가 각각 61%, 77% 제거 되었다. $900^{\circ}C$에서 준설퇴적물을 열처리했을 때 영양염류 제거율은 증가하지 않았다. CaO와 MgO 같은 첨가제를 사용하면 질산염의 제거율은 0%까지 감소했으나, 인산염 제거율은 98%까지 증가했다. 질산염과 인산염의 등온흡착은 Freundlich 식에 의해 잘 설명되었다($R^2$>0.99). 흡착반응은 pH와 이온강도에 의해 거의 영향을 받지 않았다. 흡착반응시간이 짧고 영양염류 제거율이 상당히 높다는 연구결과는 연안어장 준설퇴적물이 영양염류 제거를 위해 실제로 사용될 수 있는 가능성을 보여준다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권2호
• /
• pp.266-274
• /
• 2013

The effect of different phytogenic feed additives on reducing odorous compounds in swine was investigated using in vitro fermentation and analyzed their microbial communities. Soybean meal (1%) added with 0.1% different phytogenic feed additives (FA) were in vitro fermented using swine fecal slurries and anaerobically incubated for 12 and 24 h. The phytogenic FAs used were red ginseng barn powder (Panax ginseng C. A. Meyer, FA1), persimmon leaf powder (Diospyros virginiana L., FA2), ginkgo leaf powder (Ginkgo biloba L., FA3), and oregano lippia seed oil extract (Lippia graveolens Kunth, OL, FA4). Total gas production, pH, ammonianitrogen ($NH_3$-N), hydrogen sulfide ($H_2S$), nitrite-nitrogen ($NO_2{^-}$-N), nitrate-nitrogen ($NO_3{^-}$-N), sulfate (${SO_4}^{--}$), volatile fatty acids (VFA) and other metabolites concentration were determined. Microbial communities were also analyzed using 16S rRNA DGGE. Results showed that the pH values on all treatments increased as incubation time became longer except for FA4 where it decreased. Moreover, FA4 incubated for 12 and 24 h was not detected in $NH_3$-N and $H_2S$. Addition of FAs decreased (p<0.05) propionate production but increased (p<0.05) the total VFA production. Ten 16S rRNA DGGE bands were identified which ranged from 96 to 100% identity which were mostly isolated from the intestine. Similarity index showed three clearly different clusters: I (FA2 and FA3), II (Con and FA1), and III (FA4). Dominant bands which were identified closest to Eubacterium limosum (ATCC 8486T), Uncultured bacterium clone PF6641 and Streptococcus lutetiensis (CIP 106849T) were present only in the FA4 treatment group and were not found in other groups. FA4 had a different bacterial diversity compared to control and other treatments and thus explains having lowest odorous compounds. Addition of FA4 to an enriched protein feed source for growing swine may effectively reduce odorous compounds which are typically associated with swine production.

• Journal of Plant Biotechnology
• /
• 제44권3호
• /
• pp.335-342
• /
• 2017

Purple passion fruit (Passiflora edulis Sims) is one of the introduced tropical plants, an increasing interest has arisen due to its distinctive taste and attractive flavor. It is expected that passion fruit production and planted area will increase gradually in the years ahead because of high profitability and consumer's demands of healthful ingredients. So we tried to investigate the effect of plant growth regulators and antioxidants on in vitro plant regeneration and callus induction from leaf explants of passion fruit for an establishment of optimal mass propagation system. Young leaf explants of purple passion fruit were cultured in Murashige and Skoog (MS) medium containing different growth regulators and antioxidant additives to induce the shoot organogenesis. After 8 weeks, the highest embryogenic callus formation rate was obtained in MS medium supplemented with $1mg{\cdot}L^{-1}$ 6-benzylaminopurine (BAP) and $2mg{\cdot}L^{-1}$ 2,4-dichlorophenoxyacetic acid (2,4-D), furthermore, the shoot development via organogenesis was also observed. Silver nitrate ($AgNO_3$), which was added into the medium to minimize the adverse effects of leached phenolics, was effective for reduction of medium browning and sudden explant death. In the medium supplemented with $1mg{\cdot}L^{-1}$ BAP and $1mg{\cdot}L^{-1}$ gibberellic acid ($GA_3$), shoots were most vigorously regenerated and elongated. Most shoots rooted successfully in half strength medium with $1mg{\cdot}L^{-1}$ indol-3 acetic acid (IAA), and more than 90% of plantlets survived after 4-month acclimatization period.

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.3-10
• /
• 1974

For the manufacture of the silver-yellow glass, silver nitrate was used as a colorant in the base glass of $K_2O$-CaO-$SiO_2$ system. The latter in which the optimum condition was revealed showing beautiful yellow color had been selected among others after the preparatory studies to choose base glass. Other base glass systems considered were $Na_2O$-CaO-$SiO_2$, $R_2O$-PbO-$SiO_2$ and $R_2O$-PbO-BaO-$SiO_2$. The color developed on the specimen in various conditions was examined, using spectorphotometer, in term of the changes in absorbance with wavelength in the visible range. Experimental variables were the amount of the colorant and the additives, reheating temperature and time. The additives such as ZnO, BaO, $B_2O_3$ and $As_2O_3$ were added to increase the coloring action. It was observed that as the amount of silver increased in the base glass the absorbance around $410{\mu}m$ showed the increasing tendency, but the width of absorption curve was wider. Hence, the optimum amount of silver appeared to be 0.11~0.12%. It was found that ZnO was effective additive when present about 0.1%, while $As_2O_3$ ineffective rather retarding the coloration. Borax and $BaCO_3$ were proved effective when contained separately, but appeared ineffective when coexisted. Proper reheating temperature and time was ranged 550~$580^{\circ}C$ and 50~60 minutes. The higher the reheating temperature and the longer the reheating time, the absorbance was increased, while the width of absorption curve was wider. The colored glass prepared in the present experimental condition was found to have good water-resistance for the decorative purpose.

• 한국환경농학회지
• /
• 제23권1호
• /
• pp.22-27
• /
• 2004

제지공장의 슬러지를 활성오니슬러지와 집수조슬러지로 나누어 C/N율, 메탄발효폐액 첨가 그리고 몇몇 첨가제를 처리하고 발생한 혐기발효가스 중 메탄함량을 측정하여 각각의 처리효과를 조사해 보았다. 1. 활성오니 제지슬러지를 이용한 메탄발효의 최적 C/N율은 60으로 이전의 다른 재료들과는 다른 경향이었다. 2. 혐기발효 폐액의 첨가로 메탄함량 40% 도달 시간은 약 2일정도 앞당겼지만, 10일간의 총 메탄발생량은 1/8 수준으로 적었다. 3. 첨가제중 sodium sulfide와 ethylacetate의 처리효과는 발효폐액 첨가구에서 뚜렷하였고, 무첨가구에서도 sodium sulfide는 1.3배의 메탄생성 증가에 기여하였다. 4. 황화수소가 제거된 제지슬러지에서는 메탄이 전혀 생성되지 않았고, sodium sulfide가 첨가된 처리구에서는 메탄생성이 증가되었기에 제지슬러지 메탄발효에서 황은 필수적이라고 할 수 있다.