• 제목/요약/키워드: Nickel-Chromium

검색결과 210건 처리시간 0.025초

바이오매스 회분 혼합에 따른 토양 내 중금속 (Ni, Cr) 안정화 (Stabilization of Heavy Metal (Ni, Cr) in Soil Amended with Biomass Ash)

  • 강구;박성직;홍성구
    • 한국농공학회논문집
    • /
    • 제58권3호
    • /
    • pp.39-46
    • /
    • 2016
  • This study investigated the potential use and the effectiveness of biomass ashes for the stabilization of heavy metals in soil through a series of experiments. The ashes used for the experiments were obtained from the gasification of biomass including miscanthus and woodchips. The amounts of nickel and chromium released from the soil and ash mixture were analyzed. Chemical analysis showed that the ash contained unburned carbon as well as silica and alkali metals. Miscanthus ashes have C (83.400 %) > Si (9.040 %) > K (3.180 %) > Ca (1.800 %), and woodchip ashes have C (93.800 %) > Ca (2.220 %) > Fe (1.370 %) > K (1.200 %). KSLT and TCLP test results implied that the heavy metal concentrations were below the environmental standards and would not impose the risks. The results also showed that Ni releases were more limited as more ashes were mixed with the soil due to the increases in exchangeable, carbonate, and oxide nikels. Both miscanthus and woodchip ahses were effective in stabilizing nickel and chromium through mixing with the soil. It could be seen that ashes produced from biomass gasification can be used to stabilize the heavy metals in soils.

치과용 합금의 표면 처리가 글라스아이오노머 시멘트와 폴리카르복실레이트 시멘트의 결합력에 미치는 영향 (INFLUENCE OF SURFACE TREATMENTS OF DENIAL ALLOYS ON BOND STRENGTH OF GLASS IONOMER AND POLYCARBOXYLATE CEMENT)

  • 이헌우;우이형;임호남;최부병
    • 대한치과보철학회지
    • /
    • 제34권1호
    • /
    • pp.125-142
    • /
    • 1996
  • Bond strength of four different cements to dental casting alloys which were treated with #600 emery, tin-plating, and $50{\mu}m$ sandblasting were evaluated. The alloy specimens were Type III Gold alloy(Degulor C), Palladium-Silver alloy(Pors on 4), Nickel-Chromium(Rexillium III) alloy, which were embedded in acrylic resin disc. The specimens were treated with #600 emery and tin plating, #600 emery and sandblasting, then bonded using Fuji I, Ketac Cem(Glass ionomer cements), Poly F, Livcarbo(Polycarboxylate cements). The specimens were immersed in water for 24 hours and shear bond strengths were evaluated by Instron Machine. Tin plated, sandblasted, and debonded alloy surfaces were observed using scanning electron microscope. On the basis of this study, the following conclusions could be drawn. 1. In the tin plated alloy group, increase in bond strength of glass ionomer cements was statistically insignificant. 2. In the tin plated alloy group, increase in bond strength of polycarboxylate cements was statistically significant, except nickel-chromium alloy. 3. Sandblasted alloy group showed higher bond strength than that of tin-plated alloy group.

  • PDF

looped wire의 하중변형도와 열처리에 의한 변화 (THE LOAD DEFLECTION RATE OF LOOPED WIRE AND ITS CHANGE BY HEAT TREATMENT)

  • 이용국
    • 대한치과교정학회지
    • /
    • 제16권1호
    • /
    • pp.133-144
    • /
    • 1986
  • This study was conducted to evaluate the effects of loop formation and heat treatment upon the elastic properties of orthodontic wires. The specimens selected were .016', .018', .016x.022', and .018x.022' sized stainless steel (standard) and cobalt-chromium-nickel wires, and were divided into 7 groups as; 1. straight non-heat treated 2. U looped non-heat treated 3. L looped non-heat treated 4. Circle looped non-heat treated 5. U looped heat treated 6. L looped heat treated 7. Circle looped heat treated Heat treatment was performed in Big Jane furnace at 850' F for 3 minutes. The elastic limit and the elastic range of each specimen were determined by bending test, and load deflection rate was computed from those values. The findings were as follows; 1. The formation of loop resulted in increased load-deflection rate for both stainless steel and cobalt-chromium-nickel wires. 2. The heat treated group showed higher load-deflection rate than non-heat treated group, which was more apparent in cobalt-chromiumnickel wire than in stainless steel wire. 3. L loop had the highest load-deflection rate among 3 types of loops, followed by U loop and circle loop. 4. The specimens with greater diameter displayed the more increase in load-deflection rate by looping and heat treatment.

  • PDF

High Cadmium Levels in Cured Meat Products Marketed in Nigeria - Implications for Public Health

  • Adejumo, Olufunmilayo E;Fasinu, Pius S;Odion, Judith E;Silva, Boladale O;Fajemirokun, Timothy O
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권4호
    • /
    • pp.1933-1936
    • /
    • 2016
  • Heavy metals are known to disrupt important physiological processes in living cells, and have been responsible for various pathological conditions with possible contributions to cancer development. Food contamination have been identified as one of the ways humans are exposed to heavy metals. In developing countries like Nigeria, the regulatory framework for enforcing compliance with globally acceptable exposure to deleterious contaminants is poor. In the current study, thirteen samples of cured meat products of diverse origin marketed in South-west Nigeria were evaluated for lead, cadmium, chromium and nickel contents using the atomic absorption spectroscopy technique. All the samples analysed contained cadmium between 0.35 and 1.20 ppm, levels considered higher than acceptable limits in consumable products. Lead, chromium and nickel were not detected in any of the samples. As known cumulative poisons, there is the need for stringent regulatory control of these heavy metals in cured meat products imported into or produced indigenously in the country in order to minimize the risks to public health.

Corrosion and Sliding Properties of the Nickel-Based Alloys for the Valve Seats Application

  • Honda, Tadashi
    • Corrosion Science and Technology
    • /
    • 제7권2호
    • /
    • pp.92-98
    • /
    • 2008
  • This paper describes the experiments of the corrosion and the sliding tests of the nickel-based alloys for the gate valve seating materials used at high pressure and temperature. The general corrosion rates and IGC susceptibility are tested in pressurized water at 533 K and 575 K and in Strauss test solution. The sliding tests have been done in pressurized water at 293 k, 473 K and 573 k. The alloys containing above 10% chromium may have the anti-corrosion properties that could be applied to the valve seats for the power plants. The good sliding performance and the good pressure tightness are obtained when the disc specimens that have hardness 500 to 600 Hv combined with the seat specimens that have hardness 250 to 410 Hv containing about 40 percent of iron. The large size gate valves sliding tests have certified the test results. The anti-wear properties of the seat alloy and the anti-IGC susceptibility of the disc alloy could be improved by the addition of silicon and niobium, respectively.

한국에서 유통 중인 산화형 염모제의 중금속 농도에 관한 연구 (A Study on Heavy Metal Concentrations of Oxidized Hair Coloring Products in Korea Market)

  • 최채만;홍미선;이윤정;김화순;김현정;김정헌;채영주
    • 대한화장품학회지
    • /
    • 제39권3호
    • /
    • pp.241-249
    • /
    • 2013
  • 2012년 1월에서 10월 사이에 전국에서 유통 중인 산화형 염모제(1제) 125개 제품에서 납(Pb), 비소(As), 카드뮴(Cd), 크롬(Cr), 망간(Mn), 니켈(Ni), 구리(Cu)의 농도 측정과 국산, 수입산 및 헤나별, 성상별, 색상별로 비교해 봄으로써 이에 관련된 분야의 기초자료를 제공하고자 본 연구를 시행하였다. 분석된 전체 염모제의 평균 중금속 농도는 납 0.211 ${\mu}g/g$, 비소 0.051 ${\mu}g/g$, 카드뮴 0.008 ${\mu}g/g$, 크롬 0.954 ${\mu}g/g$, 망간 6.250 ${\mu}g/g$, 니켈 0.591 ${\mu}g/g$, 구리 0.544 ${\mu}g/g$으로 측정되었으며 납, 비소의 경우 우리나라 화장품 안전기준 등에 관한 규정에서 허용기준인 납 20 ${\mu}g/g$, 비소 10 ${\mu}g/g$보다 낮은 수치이다(식품의약품안전처 고시 제2013-24 호). 또한 헤나 염모제는 통계적으로 유의한 차이를 보였으며(p < 0.05), 납 1.264 ${\mu}g/g$, 비소 0.267 ${\mu}g/g$, 카드뮴 0.025 ${\mu}g/g$, 크롬 4.055 ${\mu}g/g$, 망간 72.044 ${\mu}g/g$, 니켈 3.076 ${\mu}g/g$, 구리 4.640 ${\mu}g/g$으로 국산 및 수입 염모제보다 높았다. 염모제의 성상별 중금속 농도는 통계적으로 유의한 차이를 보였으며(p < 0.05), 크림과 액체 타입에서 크롬이 각각 0.708 ${\mu}g/g$, 0.478 ${\mu}g/g$로 가장 높았고, 분말타입에서는 망간이 60.041 ${\mu}g/g$로 높았다. 염모제의 색상별 중금속 농도는 통계적으로 유의한 차이를 보이지 않았으며, 노란색의 경우 납, 크롬이 높은 평균 농도를 보였고, 적색과 분홍색의 염모제는 크롬, 갈색과 흑색은 망간이, 녹색은 니켈이 높은 평균 농도를 나타내었다.

사문암 지역에서 생육하는 대나물(Gypsophila oldhamiana)의 중금속 함량 (Heavy Metal Contents of Gypsophila oldhamiana Growing on Soil Derived from Serpentine)

  • 김명희;민일식;송석환
    • The Korean Journal of Ecology
    • /
    • 제20권5호
    • /
    • pp.385-391
    • /
    • 1997
  • 충남 광천과 홍성 일대의 사문암과 변성암 지역의 암석, 토양 및 출현빈도가 높은 대나물의 중금속 함량을 측정하여 사문암 토양의 독성화 정도와 식물체의 흡수관계를 조사하였다. Ni, Cr 및 Co는 사문암에 매우 높았으며 Zn, Sc, Mo 및 Fe 는 변성암에서 더 높았다. 사문암 풍화토에서는 Ni, Cr 및 Co가 높았으며 Zn과 Fe는 비사문암 풍화토(사문암 및 변성암 풍화토와 변성암 풍화토)에서 높았고, 토양의 중금속은 암석내의 함량보다 낮았다. 사문암 풍화토에 출현하는 대나물내 중금속 함량은 혼합 풍화토의 그것보다 높게 나타났으며, 같은 사문암 지역이라도 홍성보다 광천의 중금속 함량이 높았다. 대나물의 평균 Fe:Ni의 비율은 혼합 풍화토에서는 216이고 사문암 풍화토에서는 49였다. 대나물내 Ni, Cr, Co, Fe 및 Sc 등은 지상부보다 지하부에서 높았으며, Zn과 Mo 함량은 지상부에서 높았다. 암석과 식물체의 중금속 함량 비교 결과 식물체에서보다 암석의 중금속 함량이 높았고, 대나물에 의한 Zn의 흡수는 사문암과 변성암 지역에서 높았으며 Sc와 Fe는 사문암 지역에서 뚜렷이 높았다.

  • PDF

흑색 황산3가크롬을 이용한 태양열 흡열판 선택흡수막 도금기술 (Technology of selective absorber coatings on solar collectors using black chromium+3 sulfate acid on substrates)

  • 엄태인;여운택;김동찬
    • 한국태양에너지학회 논문집
    • /
    • 제33권3호
    • /
    • pp.27-35
    • /
    • 2013
  • One of the most important factors that have a large influence on performance of the solar water heater system is performance of the solar collector, more detailedly, coating technology on the surface of the solar collector, which can provide high solar absorptance and low emittance. The core of the coating technology is to coat solar selective surfaces. In this study, various performance experiments are carried out using $Cr_2(SO_4)_3{\cdot}15H_2O$ coating technology. Here, IGBT(Insulated Gate Bipolar Transistor) of 5000A-15V was used as the surface processing rectifier which can stably output power and also can control voltage and current. The plating solution mainly contains black chrome$^{+3}$ concentration, H-y Conductivity, N-u Complex, NF Additive and NC-2 Wetter. Before applying the black chrome coating on the copper plate, optimal conditions are provided by using various preprocessing methods such as removal of fat, activation, electrolytic polishing, nickel strike, copper sulfate plating and bright neckel plating, and then the automatic continuous coating experiment are performed according to plating time and cathode current density. In the experiment, after the removal of fat, chemical polishing, nickel strike and activation processes as the preprocessing methods, the black chrome coating was performed in a plate solution temperature of $28^{\circ}C$ and a cathode current density of $18A/cm^2$ for 90 seconds. The thickness of chrome and nickel on the coated plate is $0.389{\mu}m$, $159{\mu}m$ respectively. As a result of the coating experiment, it showed the most excellent performance having a high solar absorptance of 98% and a low emittance of $5{\pm}1%$ when the black chrome surface had a thickness of $0.398{\mu}m$.

Fe-23Cr-2.5C-1.2Si-1.08Mn-0.48Mo-0.3V-xNi 주철의 내식성 및 피삭성에 미치는 Ni의 영향 (Effect of Nickel Content on Corrosion Resistance and Machinability of Fe-23Cr-2.5C-1.2Si-1.08Mn-0.48Mo-0.3V-xNi Cast Iron)

  • 김기빈;정성식;백민숙;윤동주
    • 한국산학기술학회논문지
    • /
    • 제21권3호
    • /
    • pp.576-584
    • /
    • 2020
  • 압출기 스크류 소재는 주로 냉간 금형 공구강(SKD11)이 사용되고 있는데, 최근 합성 수지의 발달로 화학적 부식 및 마모 발생이 증가하고 있다. 이를 개선하기 위해 내마모성과 내식성이 우수한 고크롬 주철의 사용이 요구되지만, 난가공성으로 사용이 기피되고 있다. 본 연구에서는 고크롬 합금의 난가공성을 개선하기 위해 Fe-23Cr-2.5C-1.2Si-1.08Mn-0.48Mo-0.3V 조성의 고크롬 주철에 가공성이 우수한 니켈을 0, 0.5, 1.0, 1.5 % 첨가하여 주조하고 열처리를 진행한 후, 선삭 시험과 동전위 분극 시험을 통해 니켈이 피삭성 및 내식성에 미치는 영향을 분석하여 SKD11과 비교하였다. 고크롬 주철은 고주파 진공유도용해로를 사용하여 주조하고, 이후 750 ℃에서 5시간 동안 풀림 처리와 풀림 처리 후 1100 ℃에서 5시간동안 재열처리를 실시하였다. 750 ℃ 풀림 처리 후 선삭 시험을 실시한 결과 니켈의 함량이 1.0% 이상에서 피삭성은 현저히 향상되었다. 5% NaCl 용액에서 동전위 분극 시험 결과 주방상태와 750 ℃ 풀림 처리에서는 니켈의 함량이 증가할수록 내식성은 저하되었으나, 1100 ℃ 재열처리 후에는 1.5% 니켈에서 가장 우수한 내식성을 나타냈다.

철강용접자의 크롬 및 망간 노출평가와 산업위생관리 대책에 관한 연구 (Evaluation of Chromium and Manganese Exposure in Welders and Establishment of Efficient Preventive Measures for Fume Exposure)

  • 이영세;윤종국;박종안;이송권;채종홍;김억수
    • 한국산업보건학회지
    • /
    • 제10권1호
    • /
    • pp.45-57
    • /
    • 2000
  • Results of environmental monitoring for 35 steel industry welders exposed to manganese and chromium fume were evaluated. Efficiency of respiratory protectors, welding face shields and local exhaust ventilation were also evaluated to establish more efficient preventive measures that can protect welders from occupational disease as related to welding fume. The results are as follows; 1. Total fume from $CO_2$ arc welding with mild steel occurred 1.5 to 2.2 times more than that from shielded metal arc welding. Chromium and nickel fume from welding with stainless steel occurred 27 to 59 times and 18 to 30 times, respectively, than those with mild steel. 2. Proportions of water-soluble chromium(VI) and insoluble chromium(VI) Compare to total chromium occurring from $CO_2$ arc welding with stainless steel were 10.5% and 8.7%, respectively, while those with mild steel were 57.1 to 63.2% and 31.6 to 38.1%, respectively. 3. The efficiencies of 4 types of respiratory protectors to reduce welding fume exposure were evaluated as 54.4 to 64.4%. 4. The reducing effect of head type welding face shield was 67.6%, and that of hand type welding face shield was 58.5%. The highest reducing effect was shown in air supply welding face shield as 99.2%, although it is not convenient to wear. 5. When welding face shield and respiratory protectors were worn together, the reducing efficiency increased to 79.0 to 87.5%. 6. When local exhaust ventilation was installed in workplace, the reducing efficiencies varied from 31.5 to 73.1% according to the types of welding.

  • PDF