• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.341-342
• /
• 2008

• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.121-127
• /
• 2006

Objectives : Nickel is a major metal used in the nickel-chromium alloys of most orthodontic appliances, partial denture and implants. This study was carried out for the examination of the cytotoxicity on nickel sulfide in cultured NIH3T3 fibroblasts, and poncirin effect on nickel-induced cytotoxicity. Methods : Cell viability for the MTT assay and cell adhesion activity for the XTT assay. Results : The $IC_{50}$ of nickel sulfide by the MTT assay was $93.7\;{\mu}M$. Poncirin was significantly increased the cell viability and cell adhesion activity. Conclusion : Nickel was highly toxic and poncirin has the inhibitory effects against nickel induced cytotoxicity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.93-103
• /
• 2000

The purpose of this case study is to report a case of lung cancer with exposure to welding fumes of welders in Korea and to demonstrate the causal relationship with exposure to welding fumes, especially with nickel and hexavalent chromium. The case is 47 years old, and had been engaged in welding, gas cutting, grinding and gousing on mild, stainless steel and nickel steel for 11 years from 1982 to 1993, and have been engaged in cleaning steel rollers with a cleaning oil in the same work shop since 1993. The level of welding fume exceeded the occupational exposure limit of $5mg/m^3$ established by the Korean Ministry of Labor and American Conference of Government Industrial Hygienists (ACGIH). Especially, detectable hexavalent chromium and nickel was generated during welding, gousing on stainless and nickel steel. However, there was no ventilation systems(local and dilution) and no personal protection. There is several evidence that the past (1983-1993) exposure would be higher than the present. In conclusion, the lung case could be associated with his task including welding, gousing, and this association could be attributed to carcinogenic potential of the nickel and chromium in the fume.

• The Journal of the Korean dental association
• /
• v.21 no.2 s.165
• /
• pp.94-94
• /
• 1983

• Journal of Korea Foundry Society
• /
• v.7 no.2
• /
• pp.102-104
• /
• 1987

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.3
• /
• pp.269-278
• /
• 2014

This study aimed to provide the fundamental data on the field of cosmetics by comparing heavy metal concentration in terms of domestic/foreign products, types and colors. The study determined the concentrations of lead, cadmium, arsenic, chromium, antimony, nickel, copper and cobalt in cosmetics such as lipstick, lip gloss, lip balm, foundation and eye liner. From the period of January to August, 2013, 121 samples were collected from cosmetic stores distributing to the general market. The average metal concentrations were as follows; $0.663{\mu}g/g$ for lead, $0.010{\mu}g/g$ for cadmium, $0.056{\mu}g/g$ for arsenic, $1.144{\mu}g/g$ for chromium, $0.008{\mu}g/g$ for antimony, $0.405{\mu}g/g$ for nickel, $0.319{\mu}g/g$ for copper and $0.108{\mu}g/g$ for cobalt. Except for chromium, the heavy metal concentrations were significantly higher in foreign products than in domestic products (p < 0.05). Also, The mean concentrations of heavy metal were significantly different (p < 0.05) when classified by cosmetic type. The highest mean concentrations shown in lipstick were $1.430{\mu}g/g$ of chromium, $0.616{\mu}g/g$ of lead and $0.385{\mu}g/g$ of nickel, in foundation $1.155{\mu}g/g$ of lead and $1.023{\mu}g/g$ of chromium. In eye liner, the highest mean concentrations were $1.424{\mu}g/g$ of chromium and $0.830{\mu}g/g$ of nickel. Additionally, The concentrations of heavy metal were significantly different by color (p < 0.05). Brown colored cosmetics were found to have the highest mean concentrations of chromium, nickel and copper, ivory colored cosmetics the highest mean concentrations of chromium and lead, and pink colored cosmetics the highest concentrations of lead and chromium.

• Journal of Technologic Dentistry
• /
• v.40 no.2
• /
• pp.63-69
• /
• 2018

Purpose: The purpose of this study is to investigate the non-precious metal core materials used in the dental laboratory to fabricate the implant superstructure by CAD / CAM method. And to observe and compare the morphology and distribution of the osteoblasts in relation to implant osseointegration. Methods: In this study, the mandibular right first molar tooth model was selected as an international standard to produce a single core. Using this model, the impression was made with the silicone rubber, the tooth model was scanned, and a single core was designed and 5-axis milling was performed. The materials used were Cobalt-Chromium and Nickel-Chromium, and the cores for dental implant top structures were fabricated according to the procedures of the dental labs. After the fabrication, the marginal area of the core was separated and cell culture experiment was performed. The osteoblast cells used MC3T3-E1, which is currently widely used. For morphological analysis of osteoblasts, cells were posttreated and observed using CLSM (Confocal Laser Scanning Microscope) and compared. Results: The cell adhesion behavior of the specimen surface measured by CLSM was uniformly distributed in specimen A (Cobalt-Chromium) than in specimen B (Nickel-Chromium). The distribution and changes of the cells were different in the two specimens. Conclusion : It is possible to confirm that specimen A (Cobalt-Chromium) is suitable for the living body through adhesion and proliferation of osteoblasts related to implant osseointegration in the non-precious metal superstructure used after implantation. It is considered that it is preferable to use Co-Cr when fabricating the superstructure.

• Journal of Welding and Joining
• /
• v.17 no.5
• /
• pp.89-96
• /
• 1999

The base metal and weld metal of alloy designed austenitic stainless steels were electrochemically tested in artificial sea water. Pitting resistance of 14 different stainless steels was evaluated by measuring pitting potential. The effect of alloy element to pitting potential was evaluated by changing chromium, nickel, sulfur content. The site of pitting initiation was observed by optical microscope. As a result of electrochemical test, pitting resistance of weld metal was higher than base metal, and rapidly cooled weld metal has higher pitting potential than slowly cooled weld metal. In case of primary δ-ferrite solidification, pitting potential was increased, but residual δ-ferrite was detrimental to pitting resistance. Chromium was more effective to pitting resistance than nickel, and sulfur was very detrimental element to pitting resistance.

• Journal of Technologic Dentistry
• /
• v.7 no.1
• /
• pp.19-25
• /
• 1985

In oder to compare and measure bond strength of ceramometal system with use of ceramco porcelain powder including SnO2 and uni metal, Rexillium III, Vera Bond as non precious alloys manufactured for porecelain-metal restorations. Total 24 test sample were constructed. All Test sample were measured with a Mitutoyo micrometer graduated to 0.01mm. It is as follows measured of thickness 3.3mm(metal : 1.1mm, porcelain: 2.2mm), width 12mm, length 30mm(porcelain 12mm x 12mm), Compared maximum bending stress test. The results obtained were as follows: 1. Bond strength of each metal with ceramco porcelain powder showed statistical significance.(P<0.05) 2. Vera Bond and uni metal, uni metal and Rexillium III revealed no statistical Significance.(P>0.05) Vera Bond and Rexillium III showed statistical significance.(P<0.05) 3. The order of maximum bending stress was Rexillium III, uni metal, vera Bond. The order of bond strength ratio making bending stress was Vera bond, uni metal, Rexillium III.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.23-28
• /
• 1992

The process for recovery of acids and valuable metals such as nickel and chromium from the stainless-steel pickling acids has been developed vased on the use of solvent extraction technique. Until now, several processes for the treatment of waste acids were already developed in such countries as Japan, Swden and Canada. Those methods are, however, forcussed on the recovery of acids from them discarding the metals included in them as the hydroxides sludge. In the present work, the recovery of nickel and chromium in addition to nitric acid and hydrofluoric acid has been aimed so as to recycle them to the stainless-steel pickling lines and also to minimize the amount of sludge generated during the treatment of waste acids. The establishment of the process to recover the acids has been carried out based on the solvent extraction with TBP. The iron was eliminated from the waste solutions by precipitating in the form of hydroxide through the adjustment of pH with calcined limestone and the selective extration of chromium and nickel from the resultant solutions has been conducted by using D2EHPA as extractant.