• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1022-1028
• /
• 1997

The reaction between Ni(Ⅱ) and sodium salt of 5,6-dihydro-1,4-dithiin-2,3-dithiolate (DDDT2-) in the presence of oxygen results in the formation of Ni(Ⅲ) species, Ni(DDDT)2-, which is isolated as tetraalkylammonium salt. The same reaction performed in the absence of oxygen yields dianionic Ni(Ⅱ) species, Ni(DDDT)22-, which is also isolated as the tetraethylammonium salt. The bis(5,6-dihydro-1,4-dithiin-2,3-dithiolato) nickelate (Ⅱ) dianion, Ni(DDDT)22-, reacts with methyl iodide to yield unusually stable bis(methylthio)dithiolene complex, Ni(CH3)2C8H8S8. All the isolated dithiolato-nickel(Ⅱ) and nickel(Ⅲ) complexes are characterized by 1H NMR, UV/Vis, IR and mass spectroscopic methods. The internal redox reaction of the nickel(Ⅱ)-dithiolate has been studied by spectro-electrochemical method and the results were compared with those of other metal-dithiolenes. The alkylated nickel(dithiolene) complex presumably undergoes cis-trans isomerization reaction in solution, judging from the experimental results of variable-temperature 1H NMR measurements.

• 대한화학회지
• /
• 제49권2호
• /
• pp.145-149
• /
• 2005

• Membrane and Water Treatment
• /
• 제2권4호
• /
• pp.267-279
• /
• 2011

At steady state, the simultaneous transport of sulphuric acid and nickel sulphate through an anion-exchange membrane Neosepta-AFN (Astom Corporation, Tokyo, Japan) was investigated in a two-compartment counter-current dialyzer with single passes. The transport was quantified by the recovery yield of acid, rejection of salt and four phenomenological coefficients, which were correlated with the acid and salt concentrations in the feed. The phenomenological coefficients were determined by the numerical integration of the basic differential equations describing the concentration profiles of the components in the dialyzer. This integration was combined with an optimizing procedure. The experiments proved that the acid recovery yield is in the limits from 63 to 91 %, while salt rejection is in the limits from 79 to 97 % in the dependence on the volumetric liquid flow rate and composition of the feed.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.189-192
• /
• 2010

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.208-210
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• 한국결정성장학회지
• /
• 제20권6호
• /
• pp.283-288
• /
• 2010

나노 크기의 NiO 분말을 Ni 산성염과 Ni 염기성염을 혼합하여 제조하는 방법에서 원료가 생성되는 NiO와 이의 환원으로 생성되는 Ni 결정 특성에 미치는 영향을 연구하였다. 산성염으로는 Ni formate를 염기성염으로는 수산화 Ni과 염기성 Ni 탄산염을 사용하였다. 혼합비는 산성염 1당량에 염기성염 9당량을 사용하였으며, 탄산염을 사용한 경우 $750^{\circ}C$/2 h 하소에서도 ~100 nm의 구형의 NiO 분말을 얻었으며, 수산화 염을 사용한 경우는 $600^{\circ}C$/2 h에서는 ~100 nm의 유사 구형의 NiO가 생성되나, $750^{\circ}C$ 열처리에서는 100~600 nm의 유사 입방체 분말을 얻었다. 수산화 염을 사용한 경우에는 탄산염을 사용한 경우에 비하여 수소가스에 의한 환원이 훨씬 빠르게 진행되어 necking이 일어나며 소결이 이루어져 다공체를 형성하였다. 이들 특성을 TG/DSC, XRD, SEM으로 분석하였다.

• 대한수의학회지
• /
• 제25권2호
• /
• pp.145-148
• /
• 1985

Nickel toxicity and interactions of nickel with zinc, copper, and lead were studied in glowing chicks fed supplemented diet. Feed intake and growth rate of the chick were reduced by 250mg nickel as a sulfate salt per kg of feed. The toxicity of nickel was decreased by zinc or copper supplementation, but not lead. High nickel feed increased nickel level in kidney and decreased zinc levels in tibia and plasma. However, low zinc levels in tibia and in plasma were reversed by zinc supplementation. Hemoglobin, packed cell volume, and aortic elastin content were increased in chicks fed nickel. These results suggest that nickel toxicity is induced by interference with zinc metabolism.

• 자원리싸이클링
• /
• 제2권4호
• /
• pp.23-26
• /
• 1993

This work is carried out to develop the recovery process of vanadium as vanadium pentoxide and nickel as nickel sulphate from the leaching solution of heavy oil fly ash. First, sodium chlorate solution was added to the leaching solution to oxidize vanadium ions. With adjusting pH of the solution and heating, vanadium ions(V) is hydrated and precipitated as red cake of $V_2O_5$ from the solution. After recovering vanadium, nickel is recovered as ammonium nickel sulfate with crystallization process. From this nickel salt, nickel sulfate which meets the specifications for the electroplating industry can be produced economically. More than 85% of vana-dium and nickel in the fly ash are recovered in this process.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.219-223
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2004년도 춘계임시총회 및 제23회 학술대회
• /
• pp.218-226
• /
• 2004

Solvent extraction and stripping experiments were conducted to separate iron from a spent $FeCl_3$ etching solution containing nickel. In the extraction, PC88A, MIBK and Alamine336 were tested as an extractant in various diluents. Alamine336 salt in toluene led to the highest extraction percentage of iron. Stripping percentage of iron from the loaded organic by Alamine336 increased with decreasing HCl conentration of stripping solution and with increasing volume ratio of aqueous to organic. In the operation of bench scale mixer-settler, 7 extraction stage with 1.0M Alamine336 salt in toluene and 10 stripping stage with 0.01M HCl solution resulted in a stripped solution with 133g/L of iron and in a raffinate with most of nickel together with a small amount of iron when the flow rate ratio of organic to aqueous was 7.