• 한국정밀공학회지
• /
• 제25권8호
• /
• pp.88-95
• /
• 2008

Young's modulus of electroplated nickel thin film is systematically investigated using the resonance method of atomic force microscope. Thin layers of nickel to be measured are electroplated onto the surface of an AFM silicon cantilever and Young's modulus of plated nickel film is investigated as a function of process conditions such as the plating temperature and applied current density. It is found that Young's modulus of plated nickel thin film is as high as that of bulk nickel at low plating temperature or low current density, but decreases with increasing plating temperature or current density. The results imply that the plating rate increases as increasing the plating temperature or current density, therefore, slow plating rate produces a dense plating material due to the sufficient time fur nickel ions to form a dense coating.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.133-142
• /
• 2011

We produce a photosensitive convex plate to research a Nickel metal relief printing plate using galvanic process. A Method for preparing DLC convex plate that is metalized on Nickel metal relief printing plate using CVD(Chemical Vapor Deposition) process and $N_2DLC$-convex plate that is DLC metalized thin film layer of $N_2$ plasma surface treatment are comprised. DLC thin film layers on Nickel surface are fragile. The results of the research indicate that the coefficient of friction on DLC metalized thin film layer is relatively low than Nickel surface and the durability of Nickel surface coated DLC metalized thin film layer is superior to Nickel surface. A relative evaluation of three form plate wetting properties using varnish liquid-drop plate indicates superior printing aptitudes for $N_2DLC$, DLC, Nichel plate order as above.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.155-161
• /
• 2002

전도성 혹은 비전도성 지지체에서 전기변색이 가능한 수 nm에서 수액 nm 두께의 금속 니켈 박막 형성에 대한 연구를 수행하였다. 광학렌즈나 혹은 LCD에 사용되는 ITO, 실리콘 웨이퍼에 박막 형성에 대한 연구는 다양한 두께의 니켈 박막은 자체로서의 응용 가능성 뿐 아니라, 광전기화학 소자, 특히 선글라스로 대변되는 변색 소자에의 응용 가능성이 아주 크다. 이러한 소자들은 나노 기술 응용과 양자점의 응용 등으로 경박단소형의 렌즈나 전지, 유리 그리고 태양 선지 등에 응용이 가능하다. 전기화학적으로 니켈 금속을 ITO 유리위에 코팅한 후, AFM, XRD을 이용하여 미세구조를 확인하고, 순환전압전류법, 시간대전류법, 임피던스를 이용하여 이들의 전기화학적 박막 특성을 조사하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1321-1325
• /
• 2003

Nickel thin film is one of the most important materials used in micromachined structure. To measure the mechanical properties of electroplated nickel thin film, two techniques are adopted and compared quantitatively with. One is nano-indentation test to measure the elastic modulus. The other is tensile test to measure not only elastic modulus but also yield strength and plastic deformation, ultimate strength. To perform the tensile test, the test apparatus was constructed with linear guided servo motor for actuation, load cell for force measurement and dual microscope for strain measurement.

• 한국세라믹학회지
• /
• 제38권8호
• /
• pp.683-686
• /
• 2001

Electrochemically active lithium nickel cobalt oxide thin-film was not fabricated until now. The thin-film was deposited by RF magnetron sputtering at room temperature, and its initial phase was amorphous. By varying deposition condition, the different characteristics of thin-film were achieved. Using electrochemical analyses, the relationship between physical and electrochemical characteristics was identified. Crystallized thin-film by RTA (Rapid Thermal Annealing) was shown a good capacity and cycle property.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1727-1732
• /
• 2004

A nickel layer was deposited onto the PZT thin films, serving both as a selective radiation absorption layer and as a top electrode. The absorption properties of such nickel coated multi-layered infrared detectors were studied in the visible and infrared wavelength ranges. The optimal thickness of the nickel layer on our substrate was 10nm. The maximum absorption coefficient of the deposited 10nm thick nickel layer was 0.7 at a 632nm wavelength. However, a striking asymmetric polarization hysteresis loop was observed in these PZT thin films with nickel as the top electrode. This asymmetric polarization was attributed to the difference between the dynamic pyroelectric responses in these Ni/PZT/Pt films poled either positively or negatively before the measurement. A positively poled film showed a 40% higher voltage response than a negatively poled detector.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권5호
• /
• pp.247-251
• /
• 2004

We report highly improved yield strength of nickel thin film, prepared using electroplating. The micro-scaled nickel cantilever is found to have significantly higher yield strength than bulk nickel. For the yield strength test, the heights of the micro-scaled cantilever were varied up to 60 ${\mu}{\textrm}{m}$ and electrostatic force was used for actuation. Stress of the bent cantilever was estimated using the FEM large deflection model. The yield strength of the thin nickel film is found to be over five times higher than that of the bulk nickel previously published. Results from this study indicate that metal microstructures can be used for MEMS applications requiring large deflection.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.110-114
• /
• 2011

Polymeric films of high chemical stability and mechanical strength covered with a thin metallic film have been extensively used in various fields as electric and electronic materials. In this study, we have chosen polypropylene (PP) as the polymer due to its outstanding chemical resistance and good creep resistance. We coated thin nickel film on PP films by the electroless plating process. The surfaces of PP films were pre-treated and modified to increase the adhesion strength of metal layer on PP films, prior to the plating process, by an environment-friendly process with atmospheric plasma generated using dielectric barrier discharges in air. The surface morphologies of the PP films were observed before and after the surface modification process using a scanning electron microscope (SEM). The static contact angles were measured with deionized water droplets. The cross-sectional images of the PP films coated with thin metal film were taken with SEM to see the combined state between metallic and PP films. The adhesion strength of the metallic thin films on the PP films was confirmed by the thermal shock test and the cross-cutting and peel test. In conclusion, we made a composite material of metallic and polymeric films of high adhesion strength.

• 전기화학회지
• /
• 제12권3호
• /
• pp.251-257
• /
• 2009

In this study, we fabricated nickel oxide thin film for lithium based electrolyte using sol-gel method. This film was deposited by dip-coating method with mixed solvent of DameH (N,N-dimethylaminoethanol) and DI water. As changing the ratio between DmaeH and DI water, nickel oxide thin film was presented in different charge density and optical transmittance because they were shown various thickness. It was accounted for changing viscosity and density by the ratio of DmaeH and DI water. The thin film synthesized with 1 : 1 ratio of DmaeH and DI water was expressed best electrochromic performance in lithium based electrolyte, because of thick thickness but porous structures.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.163-167
• /
• 2002

$Ni(OH)_2/Ni$ Glass 박막에서 전기변색 속도 개선에 대한 연구를 수행하였다. 이는 선글라스의 변색속도가 수분 이상 소요되는 단점을 해결하고자 e-beam evaporator를 이용하여 니켈 금속 박막을 증착시킨 후, 전기화학적 산화-환원 반응으로 $Ni(OH)_2$에 대한 전기변색 특성을 연구하였다. 전기전도성을 갖는 ITO 에서보다 Glass 위에서의 $Ni(OH)_2$의 변색 속도가 오히려 빠르다. 이는 전위와 투과율을 측정함으로서 알 수 있다. XPS를 이용하여 Glass와 $Ni(OH)_2$ 사이의 초박막(${\sim}10{\AA}$) Ni 금속의 존재를 확인하였고, 이 나노 박막은 전기변색 장치의 응답 속도에 영향을 마쳤다. 기존의 선글라스가 5분 정도 소요되는 반면 니켈 나노 박막을 이용한 변색소자에서는 1~2초 정도 소요된다. 이론적으로는 수 ms 이내이지만 전기적 저항으로 인해 초 단위의 응답속도를 보이고 있다.