• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.297.2-297.2
• /
• 2007

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.2
• /
• pp.20-23
• /
• 2008

[ $La_2Zr_2O_7$] (LZO) buffer layers were deposited on biaxially textured Ni-W substrates by chemical solution deposition method (CSD). In this study, the effect of $B_2O_3$ addition on texture and surface roughness of LZO films was investigated. The alkoxide-based precursor solution was employed to synthesize the precursor solution of LZO and the solution was coated on biaxially textured Ni-W substrates and subsequently annealed at $900^{\circ}C$ for crystallization. The pure LZO film without $B_2O_3$ addition showed a (222) reflection in the X-ray diffraction (XRD) profile. The intensity of (222) reflection was enhanced and more rough surface was obtained after further repetition of coating. Contrary to this, the LZO film prepared by $B_2O_3$ added precursor solution shows well-developed (400) reflection peak in the XRD profile and excellent biaxial texture (${\Delta}{\theta}=4.3^{\circ}$, ${\Delta}{\phi}=6.8^{\circ}$). The surface roughness of LZO films were also improved by addition of $B_2O_3$ even after multicoating ($R_{rms}{\sim}3.1nm$). It was shown that the LZO film with smooth surface and biaxial texture was grown on the biaxially textured Ni-W substrates with addition of $B_2O_3$ in the precursor solution.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.72-72
• /
• 2002

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.95-98
• /
• 1999

The crystalline alignment of Ni substrates textured by RABiTS have a probability distribution in the surface plane. This makes it difficult to obtain a high quality of textures over all the range of a long Ni tape. In order to improve the textures of Ni tape, we have investigated a new method of texturing. We obtained non-cube textured Ni tapes by rolling and annealing a high purity Ni. In these tapes, the [001]-axes were tilted around the rolling direction, and the [100]-axes were parallel to the rolling direction. The average grain size was several cm$^2$. We deposited buffer layer (CeO$^2$/YSZ/CeO$^2$) and YBCO on those tapes. We found out that a YBCO film with grows normal with respect to the surface and this feature is independent of the tilting angles of the Ni [001]-axes.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.339-339
• /
• 2002

In the RABiTS approach to coated conductor development, successful (both economic and technological) depends on the refinement and optimization of each of three important components: the metal tape substrate, the buffer layer(s), and the HTS layer. Here we will report on the ORNL approach and progress in each of these areas. - Most applications will require metal tapes with low magnetic hysteresis, mechanical strength, and excellent crystalline texture. Some of these requirements are competing. We report on progress in obtaining a good combination of these characteristics on metal alloys of Ni-Cr and Ni-W. - The deposition of appropriate buffer layers is a crucial step. Recently, base research has shown that the presence of a stable sulfur superstructure present on the metal surface is needed for the nucleation and epitaxial growth of vapor-deposited seed buffer layers such as YSZ, CeO$_2$ and SrTiO$_3$. We report on the details and control of this superstructure for nickel tapes, as well as recent results for Cu and Ni-13%Cr. - Processes for deposition of the HTS coating must economically provide large values of the figure-of-merit for conductors, current x length. At ORNL, we have devoted efforts to a precursor/post-annealing approach to YBCO coatings, for which the deposition and reaction steps are separate. We describe motivation for and progress toward developing this approach. - Finally, we address some issues for the implementation of coated conductors in real applications, including the need for texture control and electrical stabilization of the HTS coating.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1590-1592
• /
• 1999

We have fabricated good quality superconducting $YBa_2Cu_3O_{7-{\delta}}$ thin films on Hastelloy(Ni-Cr-Mo alloys) with $CeO_2$ buffer layers by in-situ pulsed laser deposition in a multi-target processing chamber. Using one of electrical properties of YBCO superconducting which the resistance approaches to zero dramatically on transition temperature, we have researched to make power transmission line, we have deposited YBCO thin film on flexible metallic substrate. However, it is difficult to make films on flexible metallic substrates due to both interdiffusion problem between metallic substrate and superconducting layer and non-crystallization of YBCO on amorphous substrate. From early research, two ways-using textured metallic substrate and buffer layer-were proposed to overcome theses difficulties. We have chosen $CeO_2$ as a buffer layer which has cubic structure of $5.41{\AA}$ lattice parameter and only 0.2% of lattice mismatch with $3.82{\AA}$ of a-axis lattice parameter of YBCO on (110) direction of $CeO_2$. In order to enhance the crystallization of YBCO films on metallic substrates we deposited $CeO_2$ buffer layers at varying temperature $700^{\circ}C$ to $800^{\circ}C$ and $O_2$ pressure. By X-ray diffraction, we found that each domination of (200) and (111) orientations were strongly relied upon the deposition temperature in $CeO_2$ layer and the change of the domination of orientation affects the crystallization of YBCO upper layer.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.170.2-170
• /
• 2003

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.11-14
• /
• 2003

The detailed conditions of dc-sputtering for depositions of yttria-stabilized ZrO$_2$ (YSZ) films were investigated, while the films were grown on the CeO$_2$ template layers on biaxially textured Ni-tapes. The window of oxygen pressures for proper growth of YSZ films, which was dependent on sputtering powers, was determined by sufficient oxidations of the YSZ films and the de-oxidation of the target surface, which was required for rapid sputtering. The window turned out to be fairly wide under certain values of argon pressure. When the sputtering power was raised, the deposition rate increased without narrowing the window. The fabricated YSZ films showed good texture qualities and surface morphologies.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.51-55
• /
• 2003

SrTiO₃ (STO) thin fims were deposited on the biaxially textured Ni-3 wt%W alloy substrates to be used as a single buffer layer for YBa₂CU₃O/sub 7-8/(YBCO) coated conductor. Thin films of YBCO and STO were deposited using pulsed laser. The deposition condition for epitaxial growth of STO on the textured metal was identified, and YBCO coated conductor with a single STO buffer layer with critical current density of 1.2 MA㎠ at 77 K under zero magnetic field and critical temperature of 86 K, was fabricated.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.206-210
• /
• 2004

All array of carbon paste-based electrodes was prepared by screen printing the carbon paste modified with metal oxides $(TiO_2,\;RuO_2,\;PbO_2,\;Ni(OH)_2)$ and Prussian blue (PB). An electronic tongue system was assembled with the carbon-paste electrode array, and applied to discriminate the tastes of various commercial beverages and foods by measuring the chronoamperometric responses to the samples diluted in 0.1M carbonate buffer (pH 9.6). The results were analyzed with principal component analysis(PCA) method and plotted on two dimensional PCA coordinate; it was apparent that the amperometric electronic tongue system could discriminate the types of various foods and beverages.