• 한국자기학회지
• /
• 제21권4호
• /
• pp.132-135
• /
• 2011

초연자성을 갖는 코네틱(NiFeCuMo) 박막을 NiFe 박막 사이에 삽입한 삼층박막 위에 반강자성체 FeMn을 증착한 다층박막에서 NiFe와 NiFeCuMo 박막의 두께에 따른 교환결합력과 보자력에 관한 특성을 조사하였다. 특히 NiFeCuMo 박막의 두께가 1 nm일 때 NiFe 박막 사이에 삽입한 삼층박막 위에 반강자성체 FeMn을 증착한 다층박막의 교환결합력은 최댓값을 나타내었다. 고정층과 자유층에 각각 NiFeCuMo 박막을 삽입하여 초연자성의 바이오센서용 거대자기저항-스핀밸브(giant magnetoresistive-spin valves; GMR-SV) 소자를 개발할 수 있는 가능성을 보여주었다.

• 한국자기학회지
• /
• 제9권6호
• /
• pp.296-300
• /
• 1999

DC 마그네트론 스퍼터링 방법으로 금속 마스크를 사용하여 십자형태로 substrate/Ta/NiFe/FeMn/NiFe/CoFe/Al2O3/CoFe/NiFe와 substrate/Ta/NiFe/CoFe/Al2O3/CoFe/NiFe/FeMn/NiFe 스핀 터널링 접합 구조를 제조하였다. 이러한 구조에서 절연층(Al2O3)의 형성조건과 각 층의 두께와 파워에 대한 증착율에 변화를 주어 24.3%의 자기 저항비를 얻었다. 두 종류의 구조에 대한 자기적 특성 비교와 Corning glass 7059와 Si(111) 기판의 종류에 따른 결과를 비교하였으며 소자 제조때 수반되는 온도변화에 대한 특성변화를 알아보고자 열처리를 하였다. 열처리 결과 자기 저항비는 15$0^{\circ}C$까지는 어느 정도 일정한 값을 유지하다가 18$0^{\circ}C$ 열처리 후 갑자기 감소하는 결과를 얻었다.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.796-801
• /
• 2008

$LaGaO_3$ thin film was prepared on Ni-Fe metal porous substrate by Pulsed Laser Deposition method. By the thermal reduction, the dense $NiO-{Fe_3}{O_4}$ substrate is changed to a porous Ni-Fe metal substrate. The volumetric shrinkage and porosity of the substrate are controlled by the reduction temperature. It was found that a thermal expansion property of the Ni-Fe porous metal substrate is almost the same with that of $LaGaO_3$ based oxide. $LaGaO_3$ based electrolyte films are prepared by the pulsed laser deposition (PLD) method. The film composition is sensitively affected by the deposition temperature. The obtained film is amorphous state after deposition. After post annealing at 1073K in air, the single phase of $LaGaO_3$ perovskite was obtained. Since the thermal expansion coefficient of the film is almost the same with that of LSGM film, the obtained metal support LSGM film cell shows the high tolerance against a thermal shock and after 6 min startup from room temperature, the cell shows the almost theoretical open circuit potential.

• 한국자기학회지
• /
• 제8권6호
• /
• pp.369-373
• /
• 1998

본 연구에서는 마그네트론 스퍼터링 법으로 제작한 Ni-Fe/NiO 이층 박에서, NiO 증착 중 Ar 압력에 따른 교환이 방성의 변화를 고찰하엿으며 이를 미세조작과 관련시켜 해석하고자 하였다. 낮은 Ar 압력에서 증착한 Ni-Fe/NiO 이층막은 우수한 교환이방성 특성을 나타내었으나 Ar 압력이 증가함에 따라 교환이방성은 급격하게 감소하였다. 낮은 Ar 압력에서 증착한 시편은 NiO와 Ni-Fe 계면에서 epitaxy 경향을 나타내었으며 그 계면은 평범하고 그 경계는 두렷하게 구분하였다. 그러나 높은 Ar 압력에서 증착한 시편은 NiO와 Ni-Fe의 경계가 뚜렷하게 구분되지 않고 그 계면 또한 평활하지 않았다. 한편 NiO의 조성은 Ar압력의 증가에 따라 산소의 조성이 점점 증가하였다.

• Journal of Magnetics
• /
• 제6권4호
• /
• pp.129-131
• /
• 2001

In order to investigate the effect of the interface on GMR, [NiFe(25 ${\AA}$)/Cu(24${\AA}$)]$_2$/Si thin film was epitaxially grown on HF-treated Si (001) substrate using a DC magnetron sputtering method. Typical GMR effects could be observed in epitaxial film with a weak antiferromagnetic exchange coupling while non epitaxial film showed unsaturated and broad MR curves probably due to inter-diffusion between NiFe and Cu layers. Ferromagnetic resonance (FMR) experiment showed two distinct absorption peaks in all films. Each peak was revealed to come from each NiFe layer with different magnetic property. In FMR measurement very clear interface in epitaxial films could be confirmed by a lower value of line width (ΔH) and higher M$\sub$s/ of epitaxial film than those of non epitaxial films, respectively.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.107-112
• /
• 2002

We have studied diffusion behavior of NiFe/Ag bilayer deposited by on silicon Ion Beam Sputtering methods. The diffusion behavior of NiFe and Ag in NiFe/Ag thin film is analyzed by Medium Energy Ion Scattering Spectroscopy. For samples without Ta underlayer, silicides such as Ni-Si or Fe-Si were formed at Si substrate and NiFe interface. In contrast, Ag predominantly diffused into the NiFe layer probably through their grain boundaries for Ta underlayered samples.

• 한국결정성장학회지
• /
• 제20권5호
• /
• pp.216-220
• /
• 2010

Si(100) wafer와 $SiO_2$/Si(100) 웨이퍼에 증착된 NiFe 합금 박막의 결정상과 자기적 특성을 비교하고자 동시 스퍼터링법을 이용하여 두 기판 위에 150 nm의 박막을 제조하여 그의 상변화와 자기적 특성을 XRD, FE-SEM, VSM으로 비교하였다. 두 기판 위에 증착된 NiFe 박막은 BCC상으로 증착되었으나 $400^{\circ}C$에서 2시간 열처리를 한 결과 BCC에서 FCC로의 상전이가 일어나는 것을 관찰 할 수 있었으며 Si(100) wafer위에 증착된 박막에서는 $500^{\circ}C$에서 열처리 후에도 BCC와 FCC가 혼재하여 나타나는 것을 알 수 있었다. $450^{\circ}C$에서 열처리 하였을 때 각형비가 가장 높았으며 포화자화는 0.0118 emu로 나타나고 있었다. $500^{\circ}C$ 이상의 온도에서는 상전이로 인해 포화자화가 급격히 감소하는 것을 볼 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.71-71
• /
• 2009

This paper describes a simple, on-chip CMOS compatible the thin-film inductor applied for the dc-dc converters. A fully CMOS-compatible thin-film inductor with a bottom NiFe core is integrated with the DC-DC converter circuit on the same chip. By eliminating ineffective top magnetic layer, very simple process integration was achieved. Fabricated monolithic thin film inductor showed fairly high inductance of 2.2 ${\mu}H$ and Q factor of 11.2 at 5MHz. When the DC-DC converter operated at $V_{in}=3.3V$ and 5MHz frequency, it showed output voltage $V_{out}=8.0V$, and corresponding power efficiency was 85%.

• 한국진공학회지
• /
• 제8권2호
• /
• pp.116-120
• /
• 1999

Fe-Ni alloy thin films with about 3.5 $\mu\textrm{m}$ thickness were successfully grown on Al-killed steel substrates employing DC magnetron sputtering method, and then the4 film properties were characterized. The deposited film exhibited a fibre texture structure with the relationship of ${110}_\textrm{film}//{111}_\textrm{substrate}$. We found that the adhesion between the film and the substrate was fairly good considering no debonding behavior after the thermal cyclic test of 5,000 times from room temperature to $200^{\circ}C$. Also we found that the Fe-Ni alloy deposition induced a significant decrease of thermal expansion in the film processing, a new material system with much lower thermal expansion coefficient which can be applied more as shadow mask materials than an Al-killed steel sheet.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1285-1292
• /
• 2018

Microstructural properties of as-grown and annealed CoCrFeMnNi high entropy alloy (HEA) oxynitride thin films were investigated. The CoCrFeMnNi HEA oxynitride thin film was grown by magnetron sputtering method using an air gas, and annealed under the argon plus air flow for 5 h at $800^{\circ}C$. The as-grown film was homogeneous and uniform composed of nanometer-sized crystalline regions mixed with amorphous-like phase. The crystalline phase in the as-grown film was face centered cubic structure with the lattice constant of 0.4242 nm. Significant microstructural changes were observed after the annealing process. First, it was fully recrystallized and grain growth happened. Second, Ni-rich region was observed in nanometer-scale range. Third, phase change happened and it was determined to be $Fe_3O_4$ spinel structure with the lattice constant of 0.8326 nm. Hardness and Young's modulus of the as-grown film were 4.1 and 150.5 GPa, while those were 9.4 and 156.4 GPa for the annealed film, respectively.