• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.245-252
• /
• 2006

A bacterial strain, identified as Staphylococcus aureus JJ-11, producing collagenase was isolated out of 40 persons having skin troubles. S. aureus JJ-11 produced collagenase optimally in the media containing 1.5%(w/v) gelatin, 1%(w/v) yeast extract, 0.4%(w/v) $K_2HPO_4$, 0.005%(w/v) $NiSO_4{\cdot}6H_2O$ at $37^{\circ}C$ for 18 hrs. The collagenase produced by Staphylococcus aureus JJ-11 was purified at 6.66-folds purity through application of chromatography with Amberlite IRA-900 and Sephacryl S-300 HR columns. The molecular weight of the partially purified enzyme was estimated to be 62 kDa by SDS-PAGE. The protein exhibited optimum enzymatic activity at pH 7.0, and showed a stable activity at pH 4-8. The optimum temperature for collagenase was at $37^{\circ}C$, and activity was maintained upto $40^{\circ}C$. The enzyme activity was slightly elevated in the presence of divalents such as, $Fe^{2+},\;Co^{2+}\;and\;Ba^{2+}$ However, the activity was inhibited in the presence of $Sr^{2+}\;or\;Hg^{2+}$. The inhibition of activity by O-phenanthroline and EDTA suggested that the enzyme may contain metal which is required for activity. The enzyme showed the highest activity when insoluble collagen (type I) was, used as a substrate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.450-457
• /
• 2009

Periodical thermal shock can introduce defects in thermal barrier coating made by layers of CoNiCrAlY bond coating(BC) and $ZrO_2-8wt%Y_2O_3$ ceramic top coating(TC) on Inconel-738 substrate using plasma spraying. Thermal shock test is performed by severe condition that is to heat until $1000^{\circ}C$ and cool until $20^{\circ}C$. As the number of cycle is increased, the fatigue by thermal shock is also increased. After test, the micro-structures and mechanical characteristics of thermal barrier coating were investigated by SEM, XRD. The TGO layer of $Al_2O_3$ is formed between BC and TC by periodical thermal shock test, and its change in thickness is inspected by eddy current test(ECT). By ECT test, it is shown that TGO and micro-crack can be detected and it is possible to predict the life of thermal barrier coating.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.241-250
• /
• 1982

Time course of alkaline inorganic PPase activity with different parts of mung-bean sprout and some properties of partially purified enzyme from mung-bean leaves were investigated. The enzyme activity in leaf, root and cotyledon showed a tendency to increase at an early stage and then decrease gradually as germination continued. However, the crude homogenate of epicotyl showed the continuous decline of the enzyme activity but that of hypocotyl showed the continuous increase. In particular, the enzyme activity of leaf fraction was about 2-4 times as high as those of other fractions. The specific activity of the leaf enzyme was increased 86-fold, with a 23.9% yield, upon purification procedures. The purified enzyme from leaves had the Rm value of 0.35 and was not homogenous when judged by disc gel electrophoresis. Using tetrasodium pyrophosphate as a substrate, the apparent Km value for the partially purified enzyme was 0.89 mM. The enzyme was highly specific for $Mg^{2+}$ $CU^{2+}$ and $Fe^{2+}$ was also showed the activating effect of 56% and 55% with $Mg^{2+}$, respectively. However, $Ca^{2+}$), $Zn^{2+}$, $Mn^{2+}$, $Co^{2+}$ and $Ni^{2+}$ acted as inhibitors for the enzyme. The pH optimum for the enzyme shifted from 9.0 to 8.0 as the concentration of $Mg^{2+}$ was increased. The enzyme from mun-bean leaf was the most active at $50^{\circ}C$ and considerably stable on heat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.2
• /
• pp.71-79
• /
• 1988

For the purpose of producing low salt fermented anchovy by accelerated method with a strong proteolytic bacteria, in this study, a strong proteolytic bacterium was isolated from low salt fermented anchovy and its bacteriological characteristics and properties of protease were experimented. The results obtained were as fellows : three proteolytic bacteria, Aeromonas anaerogenes Barillus subtilis and Staphylococcus saprophyticus were isolated from low salt fermented anchovy($4\%\;of\;salt,\;4\%\;of\;KCl,\;0.5\%\;of\;lactic\;acid,\;6\%$of sorbitol and $4\%$ of alcohol extract of red pepper) after 40 days fermentation. Among these strains, which grow best at $30^{\circ}C$, pH 7.0, B. subtilis was found the best proteolytic strain and benefit for industrial use as shown $0.95\;hr^{-1}$ of specific growth rate, $89{\mu}g-Tyr/hr.ml$ of maximum activity after 12 hrs culture in TPY broth. The protease produced by by B. subtilis showed maximum activity at $35^{\circ}C$, pH 7.0, and molecular weight was estimated to be 23,000 by Sephadex G-100 filtration, and it was supposed to be a kind of metal chelator sensitive neutral protease from the results of strong sensitivity against EDTA, o-phenanthroline and metal ions such as $Cu^{2+},\;Ni^{2+},\;Fe^{2+}.Km$ value of that by method of Lineweaver-Burk was determinded to be $0.73\%$ for casein as a substrate.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.106-111
• /
• 2000

The magnetic thin films can be prepared without vacuum process and under the low temperature (<100 $^{\circ}C$) by ferrite plating. We have performed ferrite plating of M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$(x=0.00~0.08) films and N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$(x=0.00~0.15) films on cover glass at the substrate temperature 90 $^{\circ}C$. The crystal structure of the samples has been identified as a single phase of polycrystal spinel structure by x-ray diffraction technique. The lattice constant in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films increases but in the N $i_{x}$Z $n_{0.22}$F $e_{*}$2.78-x/ $O_4$films decrease with the composition parameter, x. The saturation magnetization in the M $n_{x}$Z $n_{0.22}$F $e_{2.78-x}$ $O_4$films does not greatly change, in agreement with observations on bulk samples.k samples.k samples.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.95-98
• /
• 2007

In this paper, the magnetic properties and the annealing behavior of spin valve structures with Mo(MoN) underlayers were studied for various underlayer thickness. The spin valve structure was Si substrate/Mo(MoN)$(t{\AA})/NiFe(21{\AA})/CoFe(28{\AA})/Cu(22{\AA})/CoFe(18{\AA})/IrMn(65{\AA})/Ta(25 {\AA})$. Mo and MoN films were deposited on Si substrates and their thermal annealing behavior was analyzed. The deposition rate of the MoN thin film was decreased and tile resistivity of the MoN thin films were increased as the $N_2$ gas flow was increased. The variations of MR ratio and magnetic exchange coupling field of spin valve structure were smaller with MoN underlayers than that with Mo underlayers up to thickness of $51{\AA}$. MR ratio of spin valves with Mo underlayers was 2.86% at room temperature and increased up to 2.91 % after annealing at $200^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased about 2.16%. The MR ratio of spin valves structure with MoN underlayers for $N_2$ gas flow 1 sccm was 5.27% at room temperature and increased up to 5.56% after annealing at $200^{\circ}C$. Upon annealing at $300^{\circ}C$, the MR ratio decreased about 4.9%.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.2
• /
• pp.47-53
• /
• 2015

The effects of electroless nickel immersion gold (ENIG) and organic solderability preservative (OSP) surface finishes on the in-situ intermetallics reaction and the electromigration (EM) reliability of Sn-3.0Ag-0.5Cu (SAC305) solder bump were systematically investigated. After as-bonded, $(Cu,Ni)_6Sn_5$ intermetallic compound (IMC) was formed at the interface of the ENIG surface finish at solder top side, while at the OSP surface finish at solder bottom side,$ Cu_6Sn_5$ and $Cu_3Sn$ IMCs were formed. Mean time to failure on SAC305 solder bump at $130^{\circ}C$ with a current density of $5.0{\times}10^3A/cm^2$ was 78.7 hrs. EM open failure was observed at bottom OSP surface finish by fast consumption of Cu atoms when electrons flow from bottom Cu substrate to solder. In-situ scanning electron microscope analysis showed that IMC growth rate of ENIG surface finish was much lower than that of the OSP surface finish. Therefore, EM reliability of ENIG surface finish was higher than that of OSP surface finish due to its superior barrier stability to IMC reaction.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.69-76
• /
• 2014

In this study, we developed an ultra-thin flexible printed circuit board(FPCB) using the sputtered flexible copper clad laminate. In order to enhance the adhesion between copper and polyimide substrate, a NiMoNb addition layer was applied. The mechanical durability and flexibility of the ultra-thin FPCB were characterized by stretching, twisting, bending fatigue test, and peel test. The stretching test reveals that the ultra-thin FPCB can be stretched up to 7% without failure. The twisting test shows that the ultra-thin FPCB can withstand an angle of up to $120^{\circ}$. In addition, the bending fatigue test shows that the FPCB can withstand 10,000 bending cycles. Numerical analysis of the stress and strain during stretching indicates the strain and the maximum von Mises stress of the ultra-thin FPCB are comparable to those of the conventional FPCB. Even though the ultra-thin FPCB shows slightly lower durability than the conventional FPCB, the ultra-thin FPCB has enough durability and robustness to apply in industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.167-175
• /
• 2018

Natural gas is a clean fuel that discharges almost no air-contaminating substances. This study examined the simultaneous reduction of $CH_4$ and NOx of NGOC/LNT catalysts for CNG buses related to the improvement of the $de-CH_4/NOx$ performance, focusing mainly on identifying the additive catalysts, loading of the washcoat, stirring time, and types of substrates. The 3wt. % Ni-loaded NGOC generally exhibited superior $CH_4$ reduction performance through $CH_4$ conversion, because Ni is an alkaline, toxic oxide, and exerts a reducing effect on $CH_4$. A excessively small loading resulted in insufficient adsorption capacity of harmful gases, whereasa too high loading of washcoat caused clogging of the substrate cells. In addition, with the economic feasibility of catalysts considered, the appropriate amount of catalyst washcoat loading was estimated to be 124g/L. The NOx conversion rate of the NGOC/LNT catalysts stirred from $200^{\circ}C$ to $550^{\circ}C$ for 5 hours showed 10-15% better performance than the NGOC/LNT catalysts mixed for 2 hours over the entire temperature range. The NGOC/LNT catalysts exhibitedapproximately 20% higher $de-CH_4$ performance on the ceramic substrates than on the metal substrates.