• Advances in environmental research
• /
• v.3 no.4
• /
• pp.321-335
• /
• 2014

Eight trace metals, Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, were measured in the urban soil of Guwahati City, Assam, India from 31 sites representing five different types of land use, residential, commercial, industrial, public utilities, and roadside. Cd and Co occurred in very low concentrations (Cd << Co) in all types of land use without any significant variation from one type of land use to another. Ni concentrations were more than those of Co, and the concentrations depended on land use pattern. Average Cr and Cu concentrations were ${\geq}100mg/kg$, but Cr had a significantly higher presence in industrial land use. Pb concentrations showed similar trends. The two metals, Mn and Zn, were present in much larger amounts compared to the others with values ${\geq}300mg/kg$. Industrial and roadside soil contained much more Mn while commercial soil was enriched with Zn. Toxicity Characteristic Leaching Procedure (TCLP) was used for elucidating the mobility characteristics of the eight heavy metals. Mn suffered the highest leaching from commercial land (9.9 mg/kg on average) and also from other types of land. Co, Cu and Pb showed higher leachability from commercial soils but the leached concentrations were less than those of Mn. The two metals, Zn and Ni, were leached from residential land in considerable amounts. The TCLP showed Mn to be the most leachable metal and Cr the least.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.405-420
• /
• 2014

To investigate geochemical characteristics of soil and atmospheric environments by anthropogenic source, we have analyzed and determined heavy metal concentrations of the surface soils beneath roadside trees and leaves of Platanus occidentalis from 52 points in Seoul during autumn 2001. For comparison of the contents of heavy metal for the soil and leaf, we have analyzed heavy metal contents of the surface soils beneath roadside trees and leaves from 2 points in rural area of Yesan during the same time period. The composition of heavy metals of soils are relatively high for Cd, Co, Cr and Ni in industrial area (IA, Industrial Area) and high for Cu, Pb and Zn in heavy traffic area (HTA, Heavy Traffic Area). The heavy metal contents of rural area in Seoul are higher than those in Yesan. The differences of chemical compositions between the washed and unwashed leaves are high for Cd, Cu, Pb and Zn in the HTA. The element couples of Cd-Co, Cr-Ni and Pb-Zn for the soils had shown a good correlation and their contamination sources could be similar. The relationship for Pb-Cu and Cu-Zn showed good correlation in Platanus leaves. The relationship between soils and unwashed leaves show a good correlation for Cr, Cu, Pb and Zn but low correlation for Cd, Co, Fe, Mn and Ni. It is thought that the Cr, Cu, Pb and Zn were derived from contaminants of soils, whereas Cd, Co, Fe, Mn and Ni were originated from atmospheric source. From the spatial variations of elements for soils and leaves, Ni and Cr were dominant in the soils of IA and Cd, Cu and Zn were dominant in those of HTA. The Contamination by Cd-Pb and Cu-Zn in unwashed leaves were analyzed to show similar patterns. Using the enrichment factors (EF) of heavy metals in unwashed leaves, the EF sequences were to be Cu, Zn, Pb, Mn, Co, Ni, Cd and Cr. We identified that Cu, Zn, Pb and Mn were most problematic of environmental hazard in Seoul.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.600-605
• /
• 2003

Battery of rolling stock is a very important device as power supply at starting and emergency control. This paper analyzes the quality of Ni-Cd battery by means of performance test. Ni-Cd battery have suitable and stable properties. That is very stable to discharge on low temperature state and very easy to manage and repair. This paper confirm the performance and property of Ni-Cd battery on low temperature environment by the performance test and estimate the life-cycle of Ni-Cd battery on board at rolling-stock by the life-test and the using-test.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.453-464
• /
• 2013

Heavy metals in the mangrove sediments of Chuuk and Kosrae, Federated States of Micronesia were analyzed to examine the pollution levels of heavy metals using enrichment factor (EF) and pollution load index (PLI). The mean concentrations of Cr, Ni, Cu, Zn, As, Cd and Pb in surface mangrove sediments were 642, 125, 46.9, 149, 15.6, 0.14 and 8.55 ${\mu}g$, respectively. Kosrae mangrove sediments showed the highest concentrations of Cr and Ni while Chuuk contains more of other metals such as Cu, Zn, As, Cd and Pb. Compared to those from other mangrove regions of the world, Cr, Ni and As levels in mangrove sediments from Micronesia were at higher levels whereas Cu, Zn, Cd and Pb were at lower to median levels. In core sediment of Chuuk, metal concentrations in the upper part were higher than those in the lower part. Based on the EF and PLI values, As is evaluated as the heaviest contaminant in the surface sediment from Micronesia whilst other metals (Cr, Ni, Cu, Zn, Cd and Pb) are present at slightly lesser levels.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.347-352
• /
• 1971

The variations of the positive and negative electrode potentials, and of internal pressure were measured during the charge of the sealed type Ni-Cd cell. Both polarization characteristics of a paste type Cd-electrode as a gas diffusion electrode in 30% KOH solution and the effects of active carbon electrode as an oxygen consuming auxiliary electrode of the Ni-Cd cell on the charging characteristics of the cell were studied. Peak voltage at the end of charge of the cell is ascribed to the peak at the negative electrode potential, which is due to the concentration polarization by the lack of $Cd^{++}$ ion and oxygen concentration. And the recovery of the negative electrode potential is resulted from depolarization by the increasing diffusion limiting current density with the increasing oxygen pressure. The active carbon electrode was effective as an oxygen consuming auxiliary electrode. The internal pressure of the cell could be maintained below 200mmHg even at one hour rate charge and overcharge by the use of active carbon electrode as an auxiliary electrode.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.2 no.2 s.2
• /
• pp.93-100
• /
• 2004

This study is to measure the heavy metal content of permanent wave products which on marketing correctly as estimating the extent of exposure by a hair permanent wave scientifically. We would like to prevent an affair from arising health obstruction as to the heavy metal who is using those and also show the basic data for proposing the new standard. The results were as follows.: in case of the average heavy metal content for a wave type thioglycol acid ingredient includes 1.61ppm(Pb), 0.03ppm(Cd), 0.05ppm(Ni), 0.27ppm(Mn), 0.82ppm(Cu) and those were recognized the significant gap between products all the heavy metals. In case of a cysteine acid ingredient includes 0.86ppm(Pb), 0.01ppm(Cd), 0.05ppm(Ni), 0.20ppm(Mn) and 0.66ppm(Cu) and those were recognized the significant gap between products except a nickel. Straight type of permanent wave reductant includes 2.11ppm(Pb), 0.01ppm(Cd), 0.27ppm(Ni), 0.66ppm(Mn), 2.53ppm(Cu) and those were recognized the significant gap between products all the heavy metals. Permanent wave reducing agent includes 1.43ppm(Pb), 0.01ppm(Cd), 0.09ppm(Ni), 0.66ppm(Mn), 0.75ppm(Cu) and those were approved the significant gap between products except a cadmium. Exposure level of the heavy metal contents per onetime permanent waving were 242.3ppm(Pb), 2.5ppm(Cd), 17.7ppm(Ni), 89.0ppm(Mn), 174.7ppm(Cu).

• Fashion & Textile Research Journal
• /
• v.4 no.3
• /
• pp.266-272
• /
• 2002

This research is compared and analyzed variations of the heavy metal contents in human hairs according to treating permanent wave manipulation before and after and permanent wave agents. This is the survey of women's hairs in 19 years old. On the basis of this we would like to analyze a extend of exposing of heavy metal scientifically. Also, we would to show a basic data for the permitted limits of heavy metal to keep the healthy hair The conclusion is as follows.; Mean contents of heavy metal in hairs is 2.11 ppm (Pb), 0.25 ppm (Cd), 2.62 ppm (Ni), 256 ppm (Zn), 8.45 ppm (Cu). In reducing agents (processing lotions) of perm, 1.50 ppm (Pb), 0.03 ppm (Cd), 0.05 ppm (Ni), 15.45 ppm (Zn), 0.86 ppm (Cu) in a perm (S), 2.30 ppm (Pb), 0.05 ppm (Cd), 0.05 ppm (Ni), 13.05 ppm (Zn), 0.65 ppm (Cu) in a perm (T). In oxidizing agents (neutralizer) of perm, 1.40 ppm (Pb), 0.03 ppm (Cd), 0.09 ppm (Ni), 9.05 ppm (Zn), 0.65 ppm (Cu) in a perm (S), 1.50 ppm (Pb), 0.02 ppm (Cd), 0.16 ppm (Ni), 8.00 ppm (Zn), 0.85 ppm (Cu) in a perm (T). Mean contents of lead(Pb) didn't show significant differences according to treating cysteine perm agents, showed it according to 3 treating thioglycolic acid perm agents (p<0.05). Mean contents of cadmium(Cd) showed significant differences (p<0.001) according to 2 treating both perm agents. Mean contents of nickel (Ni) showed neither. Mean contents of zinc (Zn) showed significant differences according to 2 treating cysteine perm agents (p<0.001) and 1 treating thioglycolic acid perm agents (p<0.01). Mean contents of copper (Cu) didn't show significant differences according to treating cysteine perm agents, showed it according to 1 treating thioglycolic acid perm agents (p<0.001).

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.17-21
• /
• 2005

Deep-sea Manganese nodules was treated with reduction-smelting process with adding the spent Ni-Cd battery or the cobalt contained spent catalyst for recovery of nickel and cobalt metals. The nickel in the spent Ni-Cd battery could be recovered by adding $5\%$ coke as a reducing agent regardless of the amount of battery added. However, to recover cobalt from the spent catalyst, it is require to add more coke for reduction of cobalt oxide in the catalyst. The treatment of metal wastes with manganese nodules can contribute to lower the cost for the processing of nodules and to facilitate the recycling of metal wastes.

• Economic and Environmental Geology
• /
• v.34 no.3
• /
• pp.283-299
• /
• 2001

The middle cover soils and clay liners collected from the Kumheung landfill in Gongiu City were analysed for As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sr, Ti and Zn concentrations using 0.] N HCl digestion and total/sequential extraction experiments followed by ICP-AES determination. The uncontaminated soil and sediment samples were also analyzed for the comparison. The results of sequential extraction showed that Cu was dominant in the oxidizable fraction, and As, Ni, Sr, Ba, and Mn were in the exchangeable fraction. Zinc and Mn occurred mostly in association with reducible, residual and carbonate fractions. Most of Cd and Pb were bound to the reducible and oxidizable fractions. The main carrier of Co, Cr, Fe and 11 was the residual fraction and another important carrier was the reducible fraction. The percentage of the metals of organically-bound form in the middle cover soils and clay liner was in the order of Cu(48%) > Ti(42%) > Pb(27%) > As(25%) > Cd(20%). As deduced from sequential extraction analysis, potential order of metal mobility in the middle cover soils and clay liner from the landfill was proposed: Cd > Sr > As > Ni > Mn > Ba > Cu > Pb > Zn » Co > 11 > Fe > Cr. Based on the 'geoaccumulation index' and the 'enrichment factor' normalized to A], the level of contamination of Cu, Ni and C1' was significant in the samples from Kumheung landfill and surrounding farmland. Their enrichments were attributed partly to anthropogenic pollutions.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1260-1266
• /
• 1996

The effects of SiO2 MnO2 and sintering atmospheres (O2, N2) on the piezoelectric properties and densification behaviors of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 were investigated. The addition of SiO2 to the system enhanced the rate of densification but supressed the rate of grain growth. On the other hand the addition of MnO2 to the system did not nearly affect the rate of densification but increased slightly the rate of grain growth The densification of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 was promoted with increasing the partial pressure of O2. The relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 sintered under O2 atmosphere were higher than under N2 atmosphere. Whereas the mechanical quality factor (Qm) of specimens sintered under O2 atmosphere were lower than under N2 atmosphere. Thus the sintering atmosphere of O2 and N2 in Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 containing of SiO2 or MnO2 acted as donor and acceptor respectively. As the amount of SiO2 increased the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 but the mechanical quality factor (Qm) did not nearly change, In the case of the addition of MnO2 to the system the relative dielectric constant ($\varepsilon$r) and piezoelectric constant (d33) of Pb0.98Cd0.02Zr0.36Ti0.39Ni0.083Nb0.167O3 sintered under O2 atmosphere decreased rapidly with increasing the amount of MnO2 but they were unchanged with increasing the amount of MnO2 under N2 sintering atmosphere. Therefore the differences of the relative dielect-ric constant ($\varepsilon$r) and piezoelectric constant (d33) due to sintering atmosphere were diminished as the amount of MnO2 increased.