• Resources Recycling
• /
• v.29 no.3
• /
• pp.51-60
• /
• 2020

This study was carried out to get the optimum conditions for manufacturing high refractive glass beads from waste fluorescent lamp glass. Chemical composition, X-ray diffraction pattern, particle size distribution, refractive index of glass beads, and the effect of air mixing ratio and ejection rate were investigated. The obtained results are as follows. The X-ray diffraction pattern and chemical composition of glass beads made of waste fluorescent glass are similar to common glass except ReO₂ 0.0108 wt%, BaO 0.071 wt%, NiO 0.0039 wt% and CaO 7.8 wt% but 11.7 wt% of common glass. The glass beads made of waste fluorescent lamp glass have the narrower particle size distribution of and the higher refractive index than the glass beads made of common glass. The optimal conditions of kiln operation for manufacturing glass beads from waste fluorescent lamp glass are 20 m/sec of ejection rate, 1.7 of air mixing ratio, and 940℃ of temperature.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.219-227
• /
• 2017

Manganese (Mn) nodules in the Arctic Sea have been founded in the Kara Sea and Barents Sea, but mineral and chemical compositions have been rarely investigated. In this study, mineralogical and geochemical characteristics of Mn nodules obtained during the Arctic Expedition ARA07C in northern East Siberian Sea were identified, and then genesis of Mn nodules were estimated by using these characteristics. Main manganese oxide minerals constituting the manganese nodule were buserite, birnessite, and vernadite. The Mn nodules generally represent radiated and massive texture, and the layered texture was developed restrictively. The radiated texture, main feature of the manganese nodule in the East Siberian Sea, is mainly composed of cuspate-globular microstructure. Compared with the Mn nodules in Pacific and Indian Oceans, Mn nodules of the East Siberian Sea are abundant in Mn, but Fe is too scarce. There was no difference in the chemical composition and microstructures between outer and inner part of nodule. Therefore, nodules are most likely to have only one genesis during their growth, and all of nodules indicate the diagenetic in $Mn-Fe-(Cu+Ni+Co){\times}10$ ternary diagram. It is considered that the manganese nodules in the East Siberian Sea are characterized by high Mn contents because manganese contents in the Arctic Ocean were mainly resulted from river or coastal erosion and most of them are trapped in the Arctic Ocean.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.51-59
• /
• 2019

This study focused on the synthesis of the nickel hydroxide using ammonium sulfate in leaching solution from waste nickel-cadmium batteries. The effect of pH, temperature and the input amount of ammonium sulfate in leaching solution was investigated. The ammonium nickel sulfate with high purity was obtained in acidic leaching solution and the solution temperature of $60^{\circ}C$. The suitable molar ratio of the input amount of ammonium sulfate to nickel in solution is 2:1. The impurity about 1.4 at.% of Cd was included in the nickel hydroxide precipitates when ammonium nickel sulfate was used. At the process using sodium sulfide which precipitates the cadmium in solution, nickel and iron compounds were precipitated together.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.588-595
• /
• 2018

This study has focused on evaluation of heavy metal contamination in seepage from 23 mine waste dumping sites in Korea. Seepage samples from the sites were taken and analyzed for heavy metals. The maximum levels (mg/L) in the samples were Al 53.98, As 16.19, Cd 1.15 Cu 37.30, Fe 28.64, Mn 39.00, Ni 0.097, Pb 0.750, and Zn 80.18. Among the sites, six mines were selected as continuous monitoring sites. As results of three months' monitoring of the sites, over the water guidelines for As, Cd, Cu, Fe, Mn, Zn and Al in seepage samples were found at two abandoned Au-Ag mines, Cd, Mn, Zn and Al at two Pb-Zn mines, and As, Fe and Mn at two other Fe-W mines. Therefore, those six mines need continuous monitoring on contamination assessment of seepage due to mining activities.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.674-683
• /
• 2010

The current study was performed to examine the agricultural suitability of the cultivated upland nearby abandoned mining areas in Korea using three different scientific risk assessment models of Korea, USA and UK. For this, three mining sites DM, MG and KS were selected among 687 abandoned mines through preliminary risk assessment. A wide range of parameters were obtained through analysis of both soil and crop samples from the selected areas for heavy metal concentration and questionnaires to the communities along with the selected mining sites. Heavy metal concentration in soil samples was lower than the values previously reported by the Ministry of Environment (ME, 2002). However, both As and Cd concentration in the soil samples exceeded the concern level for agricultural area of the Soil Environment Conservation Act. Judging from the contaminant criteria for the crops, only Zn level in pepper, soybean and corn from the mining area DM exceeded the criteria whereas As, Cd, $Cr^{6+}$, Cu, Hg, Ni, Pb did not exceed the criteria. It was demonstrated that there would be human health risk by Pb accumulated in crops from both mining areas MG and KS when estimated by the risk assessment models of Korea and USA. Against it, results of the risk assessment model of UK showed human health risk by Pb in the crops from all study areas.

• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.295-304
• /
• 2003

The Dukpyung and the Chubu areas were selected to investigate the migration and enrichment of arsenic and other toxic elements in soils and crop plants in areas covered with black shales. Rock and soil samples digested in 4-acid solution (HCI+HNO$_3$+HF+HC1O$_4$) were analyzed fer arsenic and other heavy metals by ICP-AES and ICP-MS, and plant samples by INAA. Mean concentration of As in Okchon black shale is higher than those of both world average values of shale and black shale. Especially high concentration of 23.2 mg/kg As is found in black shale from the Dukpyung area. Mean concentration of As is highly elevated in agricultural soils from the Duk-pyung (28.2 mg/kg) and the Chubu areas (32.6 mg/kg). Arsenic is highly elevated in rice stalks and leaves from the Dukpyung (1.14 mg/kg) and the Chubu areas (1.35 mg/kg). The biological absorption coefficient (BAC) of As in plant species decreases in the order of rice leaves>com leaves>red pepper>soybean leaves=sesame leaves>corn stalks>corn grains.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.337-344
• /
• 1999

This study was carried out to investigate the influence of spa sewage on water quality and chemical contents in the paddy soil along stream from 1997 to 1998. Concentration of $PO_4, SO_4, Cl, NH_{4}, Ca, Na$ and COD in the spa sewage were lower than standard for agricultural usage, and were lowered as the sewage flew to the into stream. The concentration of $SO_4$in spa sewage was over the criteria for agricultural usage in the inlet, but was lower than criteria for agricultural usage by inlet of non polluted stream water. Concentration of pollutants in the sediment of water channel were the highest in the inlet site. There were no pollutants accumulation in the paddy soil where spa sewage was irrigated. It may be resulted from nutrients uptake of rice plant and self purification of paddy soil. On the while, considering electric conductivity and nitrate in spa sewage, this results suggest that long-term irrigation of the spa sewage may be required general management with some decreasing fertilization.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.681-685
• /
• 1990

Changes in the physicochemical characteristics and trans acid of cottonseed oil under the condition of selective hydrogenation, temperature$210^{\circ}C,\;H_2\;pressure\;0.3\;kg/cm^2$ Ni catalyst amount 0.12% (in oil), agitation speed 280 rpm, were investigated. The saturated fatty acid such as palmitic acid and stearic acid did not show any difference, while linoleic acid($50.03%{\rightarrow}9.38%$) were transformed to oleic acid ($20.65%{\rightarrow}60.35%$) during hydrogenation. In linoleic acid isomers, cc form were reduced significantly, but ct, tc, tt form showed little change, respectively. In oleic acid isomer, t form increased markedly, whereas there was no significant difference in c form. Meanwhile, melting point(MP) and solid fat content (SFC) were linearly increased, but iodine value(IV) linearly decreased as hydrogenation proceeded. From these results, linear regression equations were obtained as follows. MP & IV : Y= 1.59-2.36X(r=-0.96, p<0.05), SFC($at\;20^{\circ}C$) & MP : Y=2.81+2.01X(r=0.96, p<0.05), SFC($at\;20^{\circ}C$) & IV : Y=9.40-5.16X(r=-0.99, p<0.01), SFC($at\;20^{\circ}C$) & 18 : 1t : Y=6.25+8.48X(r=0.97, p<0.05)

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.181-190
• /
• 2014

Melt grafting of itaconic acid (IA) onto an ethylene-propylene-diene terpolymer (EPDM) with various organic peroxide initiators was performed. Finding the optimum mixing conditions and concentration of ingredients is critical for effective grafting and optimum properties of grafted materials. This study focused on the effects of mixing conditions (temperature and time), initiator type/concentration and monomer concentration on the grafting degree and efficiency, melt flow index, and gel content of EPDM-g-IA. The initiator, 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101), appeared to meet for the best grafting degree (1.91%). The grafting degree increased markedly by increasing the amounts of monomer IA and initiator T-101. The grafting degree also increased by increasing mixing temperature and time. The optimum monomer and initiator concentrations and reaction temperature and time were found to be about 5wt%/0.05wt% and $160^{\circ}C$/15min, respectively. It was found that the physical properties of EPDM-g-IA were higher than those of the pristine EPDM.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.542-548
• /
• 2005

Chemical components and physiological activities Bamboo (Phyllostachys bambusoides Starf) extracts obtained by burning, dry heating or extracting with water or 70% ethanol and were investigated. Contents of soluble solid and total phenolic compounds were highest in the ethanol extract. Contents of polyphenols such as catechin, chlorogenic acid, caffeic acid, 3-hydroxy benzoic acid and ferulic acid were determined. Free sugars consisted of galactose, glucose, fructose, and sucrose. Organic acids including citric, tartaric, malic, succinic, and acetic acid were present in the bamboo extracts. Antioxidant activities of dry heat and ethanol extracts were higher than those of BHA or ${\delta}-tocopherol$. Nitrite- scavenging effect of extracts ranged from 84.7 to 99.6% at pH 1.2 ana 3.0. Tyrosinase-inhibitory activity was higher in the water extract, and SOD-like and ACE-inhibitory activity were highest in tile dry kent extract. Antimicrobial activities of the bamboo extracts were strong against Bacillus subtilis, Escherichia coli O157, and Staphylococcus aureus.