• 대한수학회지
• /
• 제55권5호
• /
• pp.1193-1205
• /
• 2018

We focus our attention on a ring property that nilpotents are contained in the Jacobson radical. This property is satisfied by NI and left (right) quasi-duo rings. A ring is said to be NJ if it satisfies such property. We prove the following: (i) $K{\ddot{o}}the^{\prime}s$ conjecture holds if and only if the polynomial ring over an NI ring is NJ; (ii) If R is an NJ ring, then R is exchange if and only if it is clean; and (iii) A ring R is NJ if and only if so is every (one-sided) corner ring of R.

• 한국표면공학회지
• /
• 제9권3호
• /
• pp.1-4
• /
• 1976

In order to get high wear-resistant gold alloy plating on electronic parts, on attempt has been made, in which Cu, Ni, and Zn EDTA salts were added in gold palting solution. The results obtained on the wear resistance are as follows: 1. The addition of 0.5g/ι or over Cu in plating solution, showed 1.5 times more wear resistance than in case of no addition. 2. The addition of 1.5g/ι or over Ni, showed 3.5 times more wear-resistance . 3. The addition of 1.5g/ι and 4.0g/ι Zn , showed 3.5 times and 6.8 times more wear resistance , respectively. 4. The addition of 1.5g/ι Ni and 1.0g/ι Zn simultaneously , showed about 10 times more wear resistance than in case of no addition.

• Journal of Magnetics
• /
• 제3권3호
• /
• pp.92-95
• /
• 1998

In this paper we report the low and high angle diffraction results, and the magnetic and magnetroesistive characteristics of the spin valve multilayer structure prepared by the sputter machine Emerald II in the Balzers Laboratory. The investigated system consists of a ferromagnetic free layer (7 nm NiFe) and a ferromagnetic pinned layer (7 nm NiFe), separated from each other by a nonmagnetic (2.1 nm Cu) spacer. The NiFe pinned layer is fixed by the exchange coupling with an antiferromagnetic layer (10 nm FeMn). For such system the magnetoresistance ratio ΔR/R=3.58%, the interlayer exchange coupling $H_c=6.4$ Oe and the field sensitivity 1.15%/Oe were otained.

• 통합자연과학논문집
• /
• 제11권1호
• /
• pp.14-18
• /
• 2018

Nickel oxide nanofibers were synthesized by electrospinning with nickel(II) acetate tetrahydrate and polyvinylpyrrolidone and calcination process. The nanofiber shape was easily detected from the nanofibers with high Ni contents after calcined at $600^{\circ}C$ and the crystal structure of layer-by-layer growth was observed from SEM images at $900^{\circ}C$. XRD and TEM results showed metallic Ni and NiO structure were formed at nanofibers obtained at 600 and $900^{\circ}C$ and the crystallite size was calculated from 25 to 55 nm. The surface of nanofibers was fully oxidized from the deconvoluted Cu 2p and O 1s XPS spectra.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.138-138
• /
• 2000

Kinetic behaviors of homoepitaxial growth on Ni(110) surface was studied at the growth-temperature ranges 290~380 K with scanning tunneling microscopy. At low temperature (~290 K), deposited Ni grows layer-by-layer mode in the first several layers with one-dimensional islands but eventually (at > monolayers) forms three-dimensional islands througy the kinetic shortening of the average length of one-dimensional islands. At the intermediat temperature (~340 K), the three-dimensional islands were observed to be I) regular mesa-like structure with high aspect ratio (~1:10) at ~15 monolayer, ii) hut-like structure with low aspect ratio (~1:1.5) at ~35 monolayer, and iii) rounded mound structure at ~55 monolayers, due to the competition of kinetic and energetic terms. At the high temperature (~ 380 K), the flat surface with layer-by-layer mode was observed up to 50 monolayers. Microscopic orgins for the observations will be discussed on the basis of kinetic Monte Carlo simulations.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.5-21
• /
• 1998

The purpose of this paper is to show that X-ray absorption spectroscopy (XANES and EXAFS) is a powerful technique for characterizing both crystalline and amorphous solids from structural (local order) and electronic point of view. The principle of this technique is briefly described by showing the main factors which must be considered for recording and fitting the experimental results. Some non-trivial examples have been selected for demonstrating that XAS spectroscopy is the only technique for bringing a definitive answer as for example: the determination of the local distortion of the $NiO_6$ octahedra in the $Li_{1-z}Ni_{1+z}O_2$ layered oxides and the evidence of the presence of copper pairs in the NASICON-type phosphate $CuZr_2 (PO_4)_3$. Are also reported some significant examples for which XAS spectroscopy is decisive with other characterization methods as (i) Raman spectroscopy for glasses (ii) Mossbauer spectroscopy for $LiNi_{1+z-t}Fe_To_2$ oxides (iii) magnetic measurements for Ce-based intermetallic compounds.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.50-56
• /
• 1998

A solvent sublation was studied for the determination of trace Cd, Co, Cu and Ni in water samples. Ammonium pyrrolidine dithiocarbamate (APDC) was used as a complexing agent. Experimental conditions such as pH of solution, amounts of APDC, the type and amount of surfactant, the type of solvent, etc. were optimized for the effective sublation of analytes. After metal-PDC complexes were formed in sample solutions of pH 2.5, the precipitate-type complexes were floated in a flotation cell with an aid of sodium lauryl sulfate as a surfactant and by bubbling with nitrogen gas. The precipitates were dissolved and separated into the surface layer of methyl iso-butyl ketone (MIBK). The analytes preconcentrated were determined by a graphite furnace atomic absorption spectrophotometry (GF-AAS). Extractability of each element was 88% for Cd(Ⅱ), 86% for Co(Ⅱ), 95% for Cu(Ⅱ) and 76% for Ni(Ⅱ), respectively. And this procedure was applied to the analysis of real samples. From the recoveries of more than 92%, it was concluded that this method could be simple and applicable for the determination of trace elements in various water samples of a large volume.

• 대한화학회지
• /
• 제38권4호
• /
• pp.288-294
• /
• 1994

1,2-bis{(diphenylphosphino)amino}propane(L$_1$) , 1,2-bis{(diphenylphosphino)amino}ethane(L$_2$)이 배위된 니켈(Ⅱ)착물, [Ni(L)X$_2$] 및 Ni(L$_2$)Cl$_2$(L = L$_1$, L$_2$ ; X = Cl$^-$, Br$^-$, I$^-$)을 합성하고 분광학적 성질을 조사하였다. X = Cl$^-$ 또는 Br$^-$인 경우에는 사각평면형 착물의 특성을 보였고, I$^-$는 사면체형 착물의 특성을 나타내었다. 합성된 Ni(L)X$_2$착물은 극성을 가진 유기용매(EtOH, DMSO, THF 및 DMF)를 반응시켰을 때 용매의 주개 수(donor number)값에 따라 가용매분해반응이 진행됨을 전자흡수스펙트럼으로 확인하였다.

• 분석과학
• /
• 제10권4호
• /
• pp.256-263
• /
• 1997

새로운 여섯 자리 리간드 1,12-bis(2-naphthol)-2,5,8,11-tetraazadode cane. 4HCl(nptr)와 1,14-bis(2-naphthol)-2,6,9,13-tetraazatetradodecane .4HCl(npptr)을 합성하고 원소분석, 적외선분광법, 핵자기공명법 및 질량스펙트럼으로 분석하였다. 합성된 리간드의 산해리상수와 코발트(II), 니켈(II), 구리(II) 및 아연(II)의 착물 안정도상수를 $25^{\circ}C$, 0.1M($KNO_3$) 이온강도에서 전위차적정법으로 측정하였다. 지방족 아민과 2-naphthol을 가지는 리간드의 염기도와 안정도상수의 관계를 알아보았다.

• 대한환경공학회지
• /
• 제30권7호
• /
• pp.712-720
• /
• 2008

호소나 하천바닥의 퇴적물에는 많은 양의 미량 금속이 함유되어 있으며, 퇴적물과 간극수 사이에는 미량 금속들의 교환이 일어난다. 간극수로 이동된 미량 금속들은 쉽게 수환경으로 확산되어 수생태계에 독성을 유발한다. 그러나 이러한 미량 금속들은 존재형태에 따라 수생물에 미치는 독성이 다르다. 따라서 본 연구에서는 경포호 등 10개의 동해안 석호에 대한 퇴적물의 간극수를 분석하고 화학종 분포 예측 프로그램(MINTEQA2)을 이용하여 미량 금속들의 존재형태를 예측하여 수환경에서의 독성여부를 확인하였다. 퇴적물에서 추출한 간극수의 미량 금속 분석결과를 예측 결과, K와 Na는 자유이온형태로 존재하고 있었으며, Al, As 및 Cr 등은 자유이온 형태를 비롯한 3$\sim$4개의 착물을 형성하였고 Ca, Co, Cd, Ni, Pb 및 Zn 등은 10개 이상의 다양한 착물을 형성하였다. 염분도가 높은 청초호 등(Group I호소)은 Cd, Co, Ni, Pb, Hg 및 Zn이 주로 염화 착물을 형성하였으며, Fe, Mn 및 Mg는 황산화 착물을 형성하였다. 그러나 염분농도가 낮은 천진호 등(Group II호소)은 Hg와 Cd가 염화 착물을 형성하였으며, Cu, Mg, Mn, Ni, Pb 및 Zn는 황산화 착물을 형성하였다. Fe는 Fe(OH)$_2{^+}$, Fe(OH)$_3$(aq) 등의 수산기 착물을 형성하였다. 또한 염분농도와 상관없이 Al, As 및 Cr은 전체 호소에서 수산기 및 산화형태의 착물을 형성하였다. 대부분 호소의 간극수에 존재하는 미량 금속들은 자유이온(M$^{x+}$)형태로 존재하고 있었으며, 그 외에 M$^{x+}$ + xCl$^-$와 M$^{2+}$ + SO$_4{^{2-}}$의 착물을 형성하고 있어 수환경으로 확산될 경우 생태계 독성 및 축척을 일으킬 것으로 생각된다.