• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.12-15
• /
• 2002

Korea Power System Protection Setting Rule was used from the rectify 1990's. Thereafter transmission voltage is raised the voltage into 765kV, and introduction to new technology of Power System, and was many of variation but, it is using. The present is using Digital type distance relay for 765kV transmission line protection. If impedance value of transmission line were to value lower than setting, this would be operating and relay setting rule is for 85% into Zone 1 self section, and Zone 2 is a 125%, Zone 3 is a 225%. Which's $15{\sim}25%$ include current transformer error 5%, potential transformer 5%, relay calculation error 5% and margin factor from the field experience. This paper is discussed transmission protective relay and relay setting rule of high voltage power system and we verify the correctness relay setting rule with distance relay using Matlab simulation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.5
• /
• pp.253-259
• /
• 2018

Recently, small satellite industries are rapidly changing. Demand for high performance small satellites is increasing with the expansion of Earth Observation Satellite market. A next-generation small satellites require a higher resolution image storage capacity than before. However, there is a problem that the HW configuration of the existing small satellite image storage device could not meet these requirements. The conventional data storing system uses SDRAM to store image data taken from satellites. When SDRAM is used in small satellite platform of a next generation, there is a problem that the cost of physical space is eight times higher and satellite price is two times higher than NAND Flash. Using the same satellite hardware configuration for next-generation satellites will increase the satellite volume to meet hardware requirements. Additional cost is required for structural design, environmental testing, and satellite launch due to increasing volume. Therefore, in order to construct a low-cost, high-efficiency system. This paper shows a next-generation solid state recorder unit (SSRU) using MRAM and NAND Flash instead of SDRAM. As a result of this research, next generation small satellite retain a storage size and weight and improves the data storage space by 15 times and the storage speed by 4.5 times compare to conventional design. Also reduced energy consumption by 96% compared to SDRAM based storage devices.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.8
• /
• pp.713-721
• /
• 2014

In Europe and USA, new programs called GRC(Green Rotorcraft) and SRW (Subsonic Rotary Wing program) respectively, have been currently underway for developing the next generation rotorcraft. The final goal is to develope fuel-efficient/environmental-friendly tilt-rotor civilian rotorcraft, which can partly replace short-range regional aircrafts. Also for safe operation, the new rotorcraft technology is cooperated with the new air transport management(ATM) system, called SESAR(Single European Sky ATM Research) and NextGen(Next Generation Air Transport System) in Europe and USA. In addition to achieve the final goal, the tilt-rotor aircraft, they are trying to improve the performance of conventional helicopters by adopting more efficient propulsion system, active rotor system, and reducing internal and external noise. Especially in GRC program of Europe, the environmental factors such as noise, fuel efficiency, reduction of emission gas(CO2, NOx), are focused for the new technologies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1947-1953
• /
• 2008

This paper studies a system design of testifying next generation convergence network. Next generation convergence network includes such elements as not only various gateway systems interworking with conventional PSTN(Public Switched Telephone Network) but also various protocols communicating between gateway systems and softswitches or gateway controllers. Discussed are an effective system solution to verify functionalities and performance of protocols professing. From such discussion, the study identifies functional blocks and operational flows required for establishing a test system, and then with a basis of these proposes a system architecture. Finally this paper presents system design results and its implemented functional details.

• Journal of Korean Society of Archives and Records Management
• /
• v.18 no.2
• /
• pp.163-188
• /
• 2018

How do we create a next generation Records Management System? Under a rapidly changing system development environment, the records management system of public institutions has remained stable for the past 10 years. For this reason, it seems to be the key cause of the structural problem of the Records Management System, which makes it difficult to accommodate user requirements and apply a new recording technology. The purpose of this study is to present a redesigned model for a next-generation records management system by analyzing the status of the electronic records management. This study analyzed "A Study on the Redesign of the Next-Generation Electronic Records Management Process," records management technology of advanced records management system, and a case of an overseas system. Based on the analysis results, the improvement direction of the records management system was analyzed from several aspects: functional, software design, and software distribution. This study thus suggests that the creation of a microservice architecture-based (MSA) and an open source software-oriented (OSS) records management system should be the focus of next-generation record management.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.229-231
• /
• 2002

The digital current differential relaying scheme is widely used for primary protection of 765(kV) power transformer. The current differential relay pickup the internal fault at the threshold which is set at 30% of rating current. Margin of 30% include current transformer error 5%, relay error 5%, on load tap changer error 7% and margin factor 140% obtained from the field experience. In this paper transformer protection relay and relay setting rule of high voltage power system are discussed. And we verify the correctness of relay setting rule with current differential relay using Matlab simulation.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.85-87
• /
• 2004

Supervisory control and data acquisition (SCADA) systems are essential parts of power system which employ a wide range of computers and communication technologies. The traditional SCADA system is mainly for information exchange in only one company, and the information is provided only to the operator or administrator. But in the deregulated environment, we need much more information, which can be exchanged among different companies. With the rapid development of internet, we can use it to access information easily. This paper proposes web technologies to be applied in power system in order to display some important information through accessing data from database, and to realize the real time control of the substation. The functions of SCADA system will be implemented by a set of Web-based components. The monitoring and control of standard 154[kV] substation model is already realized in the laboratory test. The Web-based SCADA system is able to provide sufficient information and control for pow or system through an efficient and economical way.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.21-23
• /
• 2006

As a general rule for evaluating dependability of a system, reliability is commonly considered which barely rays attention to the system behavior, however the estimation is based on the assumption of a fault-frost system, which may be impracticable and inaccurate especially for complicated system. This paper introduces a security and dependability integrated approach to analyze the availability of a fault-active system both from dependability and security points of view. Two fault modes involved are discussed about the impairment to the system reliance. The approach can be well applied to estimate and quantify the attribute of system robustness with the help of Markov chain process, which is good at solving status related problem. The comparison result between dual system and IEC61850-based almighty backup system is shown to sup-port the suggested approach.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.183-189
• /
• 2008

E-mail's role has been increased due to its merit which is sending demanded information in real-time anywhere, anytime. However, Today's E-mail security threats have being changed intelligently to attack against the specific agency. The threat is a limit to respond. Therefore precise definition and development of security technology is needed to analyze changing environment and technologies of e-mail so that remove fundamental security threat. we proposed Next Generation E-mail System Security Structure and the Next Generation fusion System using authentication As a result, in this study, we development of Next Generation E-mail System Security Structure. This system can protect E-mail user from social engineering hacking technique, spam, virus, malicious code and fabrication.

• The Korean Journal of Archival Studies
• /
• no.54
• /
• pp.151-178
• /
• 2017

The purpose of this study is to identify the problems of electronic records management in the records management field and to develop a new electronic records management system that can cope with the rapidly changing records production and management environment, which is rapidly changing because of the introduction of new IT. It is time to design the next-generation records management system in all areas of process, system, and infrastructure to meet the new government record management innovation. In this point of view, the right value and direction of the next-generation records management system are determined, and the problems of the process, system, and infrastructure are identified and settled.