• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.112-119
• /
• 2016

NEXTSat-1 is the next-generation small-size artificial satellite system planed by the Satellite Technology Research Center(SatTReC) in Korea Advanced Institute of Science and Technology(KAIST). For the control of attitude and transition of the orbit, the system has adopted a RHM(Resisto-jet Head Module), which has a very simple geometry with a reasonable efficiency. An axisymmetric model is devised with two coil-resistance heaters using xenon(Xe) gas, and the minimum required specific impulse is 60 seconds under the thrust more than 30 milli-Newton. To design the module, seven basic parameters should be decided: the nozzle shape, the power distribution of heater, the pressure drop of filter, the diameter of nozzle throat, the slant length and the angle of nozzle, and the size of reservoir, etc. After quasi one-dimensional analysis, a theoretical value of specific impulse is calculated, and the optima of parameters are found out from the baseline with a series of multi-physical numerical simulations based on the compressible Navier-Stokes equations for gas and the heat conduction energy equation for solid. A commercial code, COMSOL Multiphysics is used for the computation with a FEM (finite element method) based numerical scheme. The final values of design parameters indicate 5.8% better performance than those of baseline design after the verification with all the tuned parameters. The present method should be effective to reduce the time cost of trial and error in the development of RHM, the thruster of NEXTSat-1.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.329-337
• /
• 2000

An investigation has been performed to develop an analysis tool based on a nonlinear beam theory, which can be used to predict the long-term behavior of an artificial hip joint. The nonlinear behav ior of the femur arise from the coupled dependence of the bone density and the mechanical properties on each other. The beam theory together with its numerical algorithm is developed to take into account the nonlinear bone remodeling process of the femur that is long enough to be assumed as a beam. A piecewise linear curve for the bone remodeling rate is used in the bone remodeling theory and the surface area density of bone is modeled as the third order polynomial function of bone density. At each section of the beam, a constant curvature is assumed and the longitudinal strains are also assumed to vary linearly across the section. The Newton-Rhapson iteration method is used to solve the nonlinear equations for each cross section of the bone and a backward method is used to march along the time. The density and the remodeling signal ar, calculated along with time for the various time steps, and the developed beam theory has been verified by comparing with the results of finite element analysis of a remodeling bone with an artificial hip joint of titanium prosthesis subjected to uni-axial loads and pure bending moment. It is concluded that the developed beam theory can be used to predict the long-term behavior of the femur and thus to design the artificial hip prosthesis.

• 한국IT서비스학회지
• /
• 제19권1호
• /
• pp.145-158
• /
• 2020

With the development and widespread application of online shopping, the number of online consumers has increased. With one click of a mouse, people can buy anything they want without going out and have it sent right to the doors. As consumers benefit from online shopping, people are becoming more concerned about protecting their privacy. In the group buying scenario described in our paper, online shopping was regarded as intra-group communication. To protect the sensitive information of consumers, the polynomial-based encryption key sharing method (Piao et al., 2013; Piao and Kim, 2018) can be applied to online shopping communication. In this paper, we analyze security problems by using a polynomial-based scheme in the following ways : First, in Kamal's attack, they said it does not provide perfect forward and backward secrecy when the members leave or join the group because the secret key can be broken in polynomial time. Second, for simultaneous equations, the leaving node will compute the new secret key if it can be confirmed that the updated new polynomial is recomputed. Third, using Newton's method, attackers can successively find better approximations to the roots of a function. Fourth, the Berlekamp Algorithm can factor polynomials over finite fields and solve the root of the polynomial. Fifth, for a brute-force attack, if the key size is small, brute force can be used to find the root of the polynomial, we need to make a key with appropriately large size to prevent brute force attacks. According to these analyses, we finally recommend the use of a relatively reasonable hash-based mechanism that solves all of the possible security problems and is the most suitable mechanism for our application. The study of adequate and suitable protective methods of consumer security will have academic significance and provide the practical implications.

• 한국실내디자인학회논문집
• /
• 제11호
• /
• pp.57-63
• /
• 1997

In the early 20'c, scientific thoughts make a change the absolute and separate concept of space-time into relative concept of continual entity; a kind of ideal world. It suggests that the meaning of geometry as absolute truth with which has endowed human beings would changed to a relative meaning of accumulation in intellectual work on 'nature'. This cognitive changes appeared into absolute arts in 20'c like Cubism, Superematism or Constructivism. De Stijl movement which had recepted the relative concepts like Einstein's 'theory of relativity' as a developed thought from Newton-Cartesian cognition on the world. Abstration would be adequate method for expressing the dynamics and interrelationship between forms and for giving values to indivisual elements in a compositiov. This method had appeared Modern architectural form, as a common framework. The expression characteristics of geometrical design in Deconstructive and Experimental architecture were summerized in four features through the results of the analysis. First, the relation of architectural element and intertextuality is expressed in discontinuation of context and refusal of functional building. Second, the concept of trace expresses as connection of place, decomposing of excavation of trace, trace of axis, trace of fragments. Third, anti-gravity expression is there to express of open cubic, to outgrow of rectangular system, to outgrow of volume, to separate of ground connectiov. Fourth, the complex composition of abstracted geometric form is these to abstracted geometry about indefinite shape, to layer through the overlap and collage, to de-meaning and amusement of form through the pursuit of uncertainty, to indeterminate of formal meaning through operation and composition of similar form cause to the diverse of meaning.

• 한국정보과학회논문지:시스템및이론
• /
• 제31권3_4호
• /
• pp.247-256
• /
• 2004

본 논문에서는 애니메이션 속도에 무관한 충돌 탐지 알고리즘을 제안한다. 현재까지 개발된 대부분의 충들 탐지 알고리즘들은 점진적(incremental) 알고리즘들로서, 현 시점에서의 가까운 점(근점)을 찾기 위하여 이전 시점의 근점 주위를 먼저 찾는다. 그런데 만일 움직이는 물체가 충돌 반응에 의해서 큰 토크를 받게 된다면 회전 속도가 증가하게 되어, 다음 시점에서의 실제 근점은 현 시점에서의 근점과는 매우 동떨어져 있어 엉뚱한 위치에서 근점을 찾게 되는 단점을 가진다. 그러므로, 최악의 경우에는 각 시점에서 $O(n^2)$, 시간이 소요될 수 있다. 또한 애니메이션 속도에 따라 이러한 점진적 계산 회수가 변하게 되어 전체적인 알고리즘의 소요 시간이 변하게 되는 단점을 가지고 있다. 본 논문에서는 이러한 문제점을 근본적으로 해결하고자 새로운 방법을 제안하고자 한다. 먼저, 기하학 특성을 내포하는 구면 근점 다이아그램을 생성하고, 이를 이용하여 두 물체간의 단일 거리 함수를 생성한다. 충돌 시점을 효율적으로 찾기 위해서 구간 뉴튼 방법을 거리함수에 적용한다.

• 한국해안해양공학회지
• /
• 제1권1호
• /
• pp.93-101
• /
• 1989

본 논문에서는 가이드 타워, 텐션 레그 프랫폼, 무어링 부이, 해저 케이블, 사장교, 현수교, 케이블 루프 등과 같은 해상 및 육상 구조물의 유한요소 모델에 사용하기 위한 기하학적 비선형 케이블 요소를 연구 제시하였으며, 케이블 요소는 평면내에서 임의의 하중과 기하형상을 갖는 케이블에 대한 탄성현수 케이블 이론으로부터의 적합방정식과 연성행렬을 직접 이용하여 유도하였다. 또한, 유도된 케이블 유한요소에 근거하여, 케이블 부재를 사용하는 구조물들의 유한요소 해석을 위해 전산 프로그램을 개발하였으며, 시간영역 동적 해석을 위해 뉴마크-베타의 직접적분법을 사용하였고, 각 시간간격에서의 비선형 평형방정식 및 적합방정식을 풀기 위한 방법으로서 뉴톤-랩슨의 반복법을 사용하였다. 이상과 같이 개발된 전산 프로그램을 이용하여 케이블 부재에 대한 정적 및 동적 해석을 수행한 후 그 결과를 분석ㆍ고찰하여 보았다.

• Computers and Concrete
• /
• 제3권4호
• /
• pp.213-233
• /
• 2006

Over the past years techniques for non-linear analysis have been enhanced significantly via improved solution procedures, extended finite element techniques and increased robustness of constitutive models. Nevertheless, problems remain, especially for real world structures of softening materials like concrete. The softening gives negative stiffness and risk of bifurcations due to multiple cracks that compete to survive. Incremental-iterative techniques have difficulties in selecting and handling the local peaks and snap-backs. In this contribution, an alternative method is proposed. The softening diagram of negative slope is replaced by a saw-tooth diagram of positive slopes. The incremental-iterative Newton method is replaced by a series of linear analyses using a special scaling technique with subsequent stiffness/strength reduction per critical element. It is shown that this event-by-event strategy is robust and reliable. First, the model is shown to be objective with respect to mesh refinement. Next, the example of a large-scale dog-bone specimen in direct tension is analyzed using an isotropic version of the saw-tooth model. The model is capable of automatically providing the snap-back response. Subsequently, the saw-tooth model is extended to include anisotropy for fixed crack directions to accommodate both tensile cracking and compression strut action for reinforced concrete. Three different reinforced concrete structures are analyzed, a tension-pull specimen, a slender beam and a slab. In all cases, the model naturally provides the local peaks and snap-backs associated with the subsequent development of primary cracks starting from the rebar. The secant saw-tooth stiffness is always positive and the analysis always 'converges'. Bifurcations are prevented due to the scaling technique.

• 천문학논총
• /
• 제30권2호
• /
• pp.585-586
• /
• 2015

4U 1323-62, a low mass X-ray binary with an orbital period of 2.94 hr, exhibits periodic X-ray dips, which are due to absorption by the bulge of the outer accretion disk. The purpose of this study is to search for orbital period changes using archived X-ray data over a time span of 20 years. We present our preliminary results from analyzing light curves observed by RXTE, BeppoSAX, XMM-Newton and Suzaku. We used the method proposed by Hu et al. (2008) to estimate dip center time and adopted the Observed - Calculated method to measure changes in period. We obtained an orbital period of 2.941917(36) hr and a period derivative of $\dot{P}_{orb}/P_{orb}=(-9.9{\pm}3.5){\times}10^{-7}yr^{-1}$. The F-test result shows that the quadratic ephemeris is describes the evolution of the dip phases better than the linear ephemeris at a greater than 95% confidence level. More X-ray data collected from the early 80s will be included to further refine the orbital ephemeris.

• 천문학회지
• /
• 제51권5호
• /
• pp.143-153
• /
• 2018

We present the first results of the invariant point (IVP) coordinates of the KVN Ulsan and Tamna radio telescopes. To determine the IVP coordinates in the geocentric frame (ITRF2014), a coordinate transformation method from the local frame, in which it is possible to survey using the optical instrument, to the geocentric frame was adopted. The least-square circles are fitted in three dimensions using the Gauss-Newton method to determine the azimuth and elevation axes in the local frame. The IVP in the local frame is defined as the mean value of the intersection points of the azimuth axis and the orthogonal vector between the azimuth and elevation axes. The geocentric coordinates of the IVP are determined by obtaining the seven transformation parameters between the local frame and the east-north-up (ENU) geodetic frame. The axis-offset between the azimuth and elevation axes is also estimated. To validate the results, the variation of coordinates of the GNSS station installed at KVN Ulsan was compared to the movement of the IVP coordinates over 9 months, showing good agreement in both magnitude and direction. This result will provide an important basis for geodetic and astrometric applications.

• 대한토목학회논문집
• /
• 제5권3호
• /
• pp.49-59
• /
• 1985

탄성(彈性) 이론(理論)에 의하여 트러스의 형상최적화(形狀最適化) 문제(問題)를 형성(形成)하게 되면 부재(部材)의 단면적(斷面積)과 절점(節點)의 좌표(座標)를 동시에 고려(考慮)해야 하는 복잡(複雜)한 비선형(非線型) 계획문제(計劃問題)가 된다. 이런 비선형(非線形) 계획문제(計劃問題)를 해석(解析)할 수 있도록 제시(提示)된 기법(技法)이 별로 없고 현재 사용(使用)하고 있는 기법(技法)들도 실제(實際)의 적용(適用)에 제한(制限)을 받는 경우가 많다. 그러므로 트러스의 형태(形態), 재하조건(載荷條件) 등에 구애됨이 없이 트러스의 형상(形狀)을 최적화(最適化)할 수 있는 일반(一般) 해석기법(解析技法)이 필요(必要)한 것이다. 이에 본연구(本硏究)에서는 전(全) 해석과정(解析過程) two-phases로 나누어 phase 1 에서는 단면(斷面)을 최적화(最適化)하고 phase 2 에서는 트러스의 절점좌표(節點座標)를 변수(變數)로 하여 형상(形狀)을 최적화(最適化)하는 알고리즘을 개발(開發)한 것이다. 이 알고리즘의 phase 1 에서 유도(誘導)된 비선형(非線型) 계획문제(計劃問題)를 SUMT 문제(問題)로 변환(變換)시켜 Modified Newton-Raphson Method에 의한 SUMT 법(法)을 채택(採擇)하고 phase 2 에서는 Rosenbrock Method의 일방향(一方向) 탐사기법(探査技法)에 의해 목적함수(目的凾數)만이 최소(最小)가 되도록 하는 기법(技法)을 도입(導入)하여 최적화(最適化) 알고리즘 개발(開發)하였다. 개발(開發)된 알고리즘을 트러스의 형태(形態), 설계제약조건(設計制約條件), 재하조건(載河條件) 등을 변화(變化)시켜 가면서 수종(數種)의 트러스에 적용(適用)하여 수치계산(數値計算)을 실시(實施)하고 그 결과(結果)를 다른 알고리즘의 결과(結果)와 정교(正較)하므로서 개발(開發)된 알고리즘의 타당성(妥當性) 안정성(安定性) 적용성(適用性)을 검토(檢討)하였다. 연구(硏究) 결과(結果) 개발(開發)된 이 two-phases 알고리즘은 트러스의 설계조건(設計條件)에 구애받지 않고 트러스의 형상최적화(形狀最適化)에 적용(適用)할 수 있으며 안정성(安定性)있게 빠른 속도(速度)로 최적해(最適解)에 수렴(收斂)한다는 사실(事實)이 확인(確認)되었다. 이에 본(本) 알고리즘을 트러스의 형상최적화(形狀最適化) 알고리즘으로 새로이 제안(提案)하고 본(本) 알고리즘이트러스의 경제적(經劑的)인 설계(設計)에 도움을 줄 수 있을 것으로 사료(思料)된다.