• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.70-77
• /
• 2008

The purpose of this study evaluates a feasibility and economical efficiency of new renewable energy. According as weather change is serious problem now days, every people make attention to the reduction of greenhouse gas. The revitalization of new renewable energy creates the variety of energy source, stability of energy supply and reduction of greenhouse gas. In this study evaluates a feasibility and economical efficiency from new renewable energy of various photo voltaics, wind power, small hydro and biogas. Feasibility does in standard of technical characteristic, politic support, marketability, establishment present condition and development aim. Economical efficiency does in standard of developmental unit cost, utilization factor, equipment life, politic support cost, interest ratio. The results of this study were as follows photo voltaics, wind, small hydropower, biogas in order feasibility is high. Developmental unit cost, utilization factor, equipment life, politic support cost and analyzed the relationship of interest ratio fluctuation and economical efficiency. From all new renewable energy the utilization factor most is important in economical efficiency but necessary utilization factor is difficult because environmental problem.

• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.33-40
• /
• 2020

The research topics of more than 1,900 wind energy papers registered in the Korean Journal Citation Index (KCI) were modeled into 25 topics using latent directory allocation (LDA), and their consistency was cross-validated through principal component analysis (PCA) of the document word matrix. Key research topics in the wind energy field were identified as "offshore, wind farm," "blade, design," "generator, voltage, control," 'dynamic, load, noise," and "performance test." As a new method to determine the similarity between research topics in journals, a systematic evaluation method was proposed to analyze the correlation between topics by constructing a journal-topic matrix (JTM) and clustering them based on topic similarity between journals. By evaluating 24 journals that published more than 20 wind energy papers, it was confirmed that they were classified into meaningful clusters of mechanical engineering, electrical engineering, marine engineering, and renewable energy. It is expected that the proposed systematic method can be applied to the evaluation of the specificity of subsequent journals.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.656-659
• /
• 2005

his paper develops the systematic and quantitative priority-determining method for national investment using the framework of evaluating R&D. This study proposes multi criteria for evaluating the R&D of New & Renewable Energy through analysing the attribute of 11 types of energy. The framework is constituted by 4 criteria, the political urgency, economic impact, regional constraint. and technological attribute and the each criteria has 3 or 4 sub-criteria. These sub-criteria are weighted using AHP.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.6
• /
• pp.51-60
• /
• 2015

In statutes on the promotion of distribution of new and renewable energy, which were revised in 2014, daylight system and fuel cell were added in addition to existing new and renewable energy sources. This study, therefore, aimed at setting up targets for the introduction of daylight system and analyzing the installation rate of new and renewable energy which can be provided by daylight system for the aggressive use of daylight system, thereby deducting the optimal combination ratio with other new and renewable energy sources. The results of the study are as follows. First, when a prism-shaped daylight system was installed to a round indoor gymnasium among domestic indoor gymnasiums, out of a supply obligations allotment rate of 15% of new and renewable energy, the rate of daylight system was basically set at 2.5%. Second, therefore, with daylight system coming first, the lacked supply obligations rate was taken up by solar photovoltaic, solar heat and geothermal heat. In addition, using the KRESS Program, economic, technical, environmental and complexity evaluations for the upper 5% was made, deducting the optimal ratio of the system. The results produced the following optimal combination ratios: solar photovoltaic (83.3%) in economic evaluation, solar heat (8.3%) and geothermal heat (75%) in technical evaluation, solar photovoltaic (83.3%) in environmental evaluation, and solar photovoltaic (83.3%, the same as in economic evaluation) in complexity evaluation.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2006.05a
• /
• pp.228-231
• /
• 2006

• New & Renewable Energy
• /
• v.2 no.1 s.5
• /
• pp.21-25
• /
• 2006

Standards are increasing of importance for New & Renewable energy. The rapid growth of production is one reason for this but standards are equally important in ensuring the quality and reliability of installed New & Renewable energy systems, which have a propound impact on acceptance of the technology in the expanding marketplace. Korea government (Korea Agency for Technology and Standards, KAIST)make and implement a five year plans for promotion of international standardization of this field from 2004. KATS leads the technology innovations and eventually increases the international competitiveness. Strategic collaboration with other countries is also strengthened through Korea's participation in international standards and conformity assessment system such as IECEE(IEC system for conformity and certification of electrical equipment). One of the major goals of the Plan is to facilitate trade between Korea and its trading partners by emphasizing harmonization of its national conformity assessment system with international norms.

• Prospectives of Industrial Chemistry
• /
• v.14 no.2
• /
• pp.10-25
• /
• 2011

지속적으로 증가하고 있는 에너지 수요에 대처하기 위해 신재생에너지 기술 확보를 위한 노력이 계속되고 있다. 연료전지는 풍력, 태양전지와는 달리 환경적 제약 없이 연속적인 에너지 공급이 가능하여 건물용 분산발전용으로 적합한 요건을 갖추고 있다. 최근 시작된 시범보급 사업으로 건물용 연료전지의 초기 시장 진출이 시작되었고 공공 기관 대체에너지의무화와 그린홈 보급사업 시행으로 시장 확대가 기대된다. 본 논문에서는 건물용 연료전지 시스템의 기본원리와 국내외 개발 동향에 대해 살펴보았으며 핵심부품에 대한 기술개발 현황에 대해 기술하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.327-331
• /
• 2008

In this paper, we argue that new&renewable energy resources are difficult to be managed with GIS technology due to their spatiotemporal features, and suggest that spatiotemporal database and sensor network can be applied to the new&renewable energy management system as advanced technology. To give the motivated issues, we introduce and analyze the concept of the spatiotemporal database and sensor network, and the case studies in each applications.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.3
• /
• pp.155-166
• /
• 2008

The performance evaluation of a new building is becoming more important because efficient design alone is often not sufficient to deliver an efficient building. However, there is a lack of standard evaluation methods to measure the energy performance of a new construction that has Energy Conservation Design Measures(ECDMs). This study presents an enhanced method based on calibrated whole-building simulation for evaluating the energy performance of new commercial buildings and demonstrates its use using a case-study building, including: an Energy Use Index(EUI) comparison with sub-metered data and an evaluation of the performance of specific ECDMs. The use of this method has determined that the case-study building was shown to use approximately 47% less energy than the base-case building that has the same shape and function as the case-study building(i.e., calibrated as-built simulation mode]), but doesn't include the simulated ECDMs.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass