• New & Renewable Energy
• /
• v.20 no.2
• /
• pp.2-16
• /
• 2024

Various loads induced by marine environmental conditions, such as waves, currents, and wind, are crucial for the operation and viability of offshore wind power (OWP) systems. In particular, waves have a significant impact on the stress and fatigue load of offshore structures, and highly reliable design parameters should be derived through extreme value analysis (EVA) techniques. In this study, extreme wave analyses were conducted with various Weibull distribution models to determine the reliable design parameters of an OWP system suitable for the Ulsan area. Forty-three years of long-term hindcast data generated by a numerical wave model were adopted as the analyses data, and the least-squares method was used to estimate the parameters of the distribution function for EVA. The inverse first-order reliability method was employed as the EVA technique. The obtained results were compared among themselves under the assumption that the marginal probability distributions were 2p, 3p, and exponentiated Weibull distributions.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.240-248
• /
• 2014

It is DC power that Output of renewable energy being recently developed and researched. Also, demand of DC power will expect to proliferate due to increase of digital load. Thus, DC distribution system providing high quality of power and reliability has emerged as a new distribution system. If the conventional distribution systems are substituted by proposed DC distribution system, the output of renewable energy can be connected with distribution systems under minimum power conversion. Therefore, in the event of connection with DC load, it can construct an efficient distribution system. In this paper, the integrated parallel operation of power conversion module for DC distribution system is proposed. Also, this paper proposed modularization of power conversion devices for DC distribution system and power control for parallel operation of large capacity system. DC distribution system consists of three power conversion modules such as AC/DC power conversion module 2 set, ESS module 1 set. DC distribution system controls suitable operation depending on the status of the DC power distribution system and load. Integrated operation of these systems is verified by simulation and experiment results.

• Journal of Distribution Science
• /
• v.17 no.1
• /
• pp.21-31
• /
• 2019

Purpose - As the market economy deepens, the issue of social equity caused by income distribution becomes more and more significant. Therefore, this paper attempts to exploit the determinants of income distribution in terms of macroeconomics. Research design, data, and methodology - The data set from 1990 to 2017 will be used to conduct an empirical analysis under a menu of econometric approaches such as vector autoregressive model and impulse response function. The income distribution and other macroeconomic variables such as foreign direct investment and employment will be used to conduct an empirical analysis to explore the determinants of income distribution in terms of macroeconomics. Results - The findings indicate that the income distribution is related with macroeconomics. More specifically, the export, import, GDP and foreign direct investment play a role in deteriorating the income distribution. Conversely, the industrialization, inflation and employment can improve the income distribution. Unfortunately, the inflation and employment do not get through under 5% significant test. Conclusions - Due to that a good income distribution can be beneficial for both a country and an individual, this paper provides a new scope for China's government to improve its income distribution in terms of macroeconomics.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.1
• /
• pp.135-146
• /
• 2004

This paper first addresses a distribution planning method on centrally controlled supply chain. The distribution channels are assumed to be network of arborescence form. For such distribution networks, this study proposes a distribution planning scheme when the demands for retail sites are provided for a given planning horizon. As the planning horizon rolls forward, for a new horizon, forecasted demand distributions of periods in the horizon are updated. An idea of controlling customer service level by the selection of demand to be used in the planning (Demand Used in Planning, DUP) from the forecasted values is also discussed.

• Journal of Distribution Science
• /
• v.2 no.2
• /
• pp.1-15
• /
• 2004

The distribution companies in Korea usually specify the buying system in jikmeip, tukjeongmeip, imdeeul, and imdegap. In this view, the development of distribution companies in Korea is highly dependent on the which business status is emphasized. And it is considered critical to identify the important features of each buying system and the impact these systems have on each business status. Subsequently, the purpose of this study is to identify the said features and impact. With this study, we have tried to explore a new vision for distribution taking a consideration of the fact that most studies within Korea are oriented in marketing standpoint. Particularly, we have intended to analyze the distribution industry in the view of internal standpoint of a distribution company.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1281-1286
• /
• 2009

As a general radial configuration of power distribution system, the various researches have being studied to change a radial configuration to network one such as smart, intelligent and micro grid for loop operation. If a radial configuration changes to network, protective coordination comes to the biggest problem. When a typical protective algorithm is applied to loop distribution system protection, the interrupted section is expanded, therefore, reliability grows worse. This paper presents the new protective method being able to apply to loop distribution system with Distribution Automation System (DAS) which separate the minimal faulted section. Through contingency analysis of the sustained and momentary fault, we analyzed the influence for radial configuration and loop configuration using interrupted area and proved the effectiveness of proposed method.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.26 no.4
• /
• pp.71-82
• /
• 2001

Using the computer simulation method, we invest19ate the probability distribution of maximum eigenvalue of pair-wise comparison matrix, which has been used as a parameter for measuring the consistency of responses in analytic hierarchy process (AHP). We show that the shape of the distribution of the maximum eigenvalue is different according to the dimension of the matrix. In addition, we cannot find any evidence that the distribution of the Consistency Index is a Normal distribution, which has been claimed in the Previous literature. Accordingly, we suggest using so called K-index calcu1ated based on the concept of cumulative distribution function lather than based on that of arithmetic mean because the probabilistic distribution cannot be assumed to be a Normal distribution. We interpret the simulation results by comparing them with the suggestion of Saaty[11]. Our results show that using Saaty＇s value could be too generous when the dimension of the matrix is 3 and strict over 4. Finally, we propose new criteria for measuring the response consistency in AHP.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.182-184
• /
• 2000

There are several facilities in Kochang distribution test center such as artificial fault generator(AFG), new distribution automation system(NDAS), communication networks (wireless and optic), lumped constant circuit, switches for distribution automation, overhead and underground distribution line. We have been field testing on remote control, data acquisition. remote metering, feeder automation and so on for distribution automation using those equipment.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.903-914
• /
• 2014

The inverse Weibull distribution has been proposed as a model in the analysis of life testing data. Also, inverse Weibull distribution has been recently derived as a suitable model to describe degradation phenomena of mechanical components such as the dynamic components (pistons, crankshaft, etc.) of diesel engines. In this paper, we derive the approximate maximum likelihood estimators of the scale parameter and the shape parameter in the inverse Weibull distribution under multiply type-II censoring. We also develop four modified empirical distribution function (EDF) type tests for the inverse Weibull or extreme value distribution based on multiply type-II censored samples. We also propose modified normalized sample Lorenz curve plot and new test statistic.

• International Journal of Reliability and Applications
• /
• v.13 no.2
• /
• pp.91-104
• /
• 2012

Sarhan and Kundu (2009) introduced a new distribution named as the generalized linear failure rate distribution. This distribution generalizes several well known distributions. The probability density function of the generalized linear failure rate distribution can be right skewed or unimodal and its hazard function can be increasing, decreasing or bathtub shaped. This distribution can be used quite effectively to analyze lifetime data in place of linear failure rate, generalized exponential and generalized Rayleigh distributions. In this paper, we apply the simulated annealing algorithm to obtain the maximum likelihood point estimates of the parameters of the generalized linear failure rate distribution. Simulated annealing algorithm can not only find the global optimum; it is also less likely to fail because it is a very robust algorithm. The estimators obtained using simulated annealing algorithm have been compared with the corresponding traditional maximum likelihood estimators for their risks.