• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2004

As the environmental pollution becomes serious global problem, the regulation of emission exhausted from automobiles is strengthened. Therefore, it is very important to know how to reduce the NOx and PM simultaneously in diesel engines, which has lot of merits such as high thermal efficiency, low fuel consumption and durability. By this reason, the new concept called as Homogeneous Charge Compression Ignition(HCCI) engines are spotlighted because this concept reduced NOx and P.M. simultaneously. However, it is well known that HCCI engines increased HC and CO. Thus, the investigation of combustion characteristics which consists cool and hot flames for HCCI engines were needed to obtain the optimal combustion condition. In this study, combustion characteristics for direct injection type HCCI engine such as quantity of cool flame and hot flame, ignition timing and ignition delay were investigated to clarify the effects of these parameters on performance. The results revealed that diesel combustion showed the two-stage ignition of cool flame and hot flame, the rate of cool flame increase and hot flame decrease with increasing intake air temperature. On the other hand, the gasoline combustion is the single-stage ignition and ignition timing is near the TDC. In addition mixed fuel combustion showed different phenomenon, which depends on the ratio of gasoline component. Ignition timing of mixed fuel is retarded near the TDC and the ignition delay is increased according to ratio of gasoline.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.11
• /
• pp.912-917
• /
• 2001

In this study, we define the measuring method of crank angle precisely using an event and perform a study on the hardware structure and software algorithms which is applicable for the commercial engine. Also we developed a Computer-ECU(Personal computer based electronic control unit) using a computer and a microprocessor, for performing the ignition at a desire position(angle) and for controlling a duty ratio a pulse for ISC(Idle speed control). We applied these algorithms to the modeling which is induced a concept of event and got a better result than a conventional ECU in the state of transient as a result of performing air fuel ratio control in a commercial engine. This technique can be used for the back to improve ECU performance. It the present type of Hybrid I. C voltage regulator is altered to the new type of regulator, we will be surely able to reduce the production cost as well as simplify the design of alternator\`s rear bracket and rectifier part because of the removal of trio diode. Experiment is taken by MS-R004.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.42-47
• /
• 2004

Air-fuel mixing and flame-holding are two important factors that have to be considered in the design of an injection system. Different injection strategies have been proposed with particular concern for rapid air-fuel mixing and flame-holding. Two representative injection techniques can be applied in a supersonic combustor. One of the simplest approaches is a transverse(normal) injection. The cavity flame holder, an integrated fuel injection/flame-holding approach, has been proposed as a new concept for flame holding and air-fuel mixing in a supersonic combustor. This paper describes numerical efforts to characterize the flame-holding and air-fuel mixing process of a model scramjet engine combustor, where hydrogen is injected into a supersonic cross flow and a cavity. The combustion phenomena in a model scramjet engine, which has been experimentally studied at University of Queensland and Australian National University using a free-piston shock tunnel, were observed around the separation region of the transverse injector upstream and the inside cavity. The results show that this flow separation generates recirculation regions which increase air-fuel mixing. Self-ignition occurs in the separation-freestream and cavity-fteestream interfaces.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.937-950
• /
• 2004

In this paper, we present the design and implementation of new execution environment named Customizable Architecture for Flexible Execution Environment(CAFEs) that supports the mechanism of protocol customization and service referencing. We introduce a new concept as micro protocols and active services to enhance software reusability. Micro protocol represents a specific algorithm or functionality of existing network protocol and the active service is in charge of binding legacy application and releasing the active network oriented services. The pro-posed active network execution environment is made up of three parts, virtual network system, protocol and service manager, event engine. First, the virtual network system is used to connect each active nodes using virtual network channels which are based on multiple existing protocol layers. Second, the protocol and service manager is responsible for composing micro protocols and active services to develop new network proto-col and service easily. Finally, the event engine is used to detect the automatic transition of system components using event delegation model. To verify the CAFTs, we have an experiment about the delivery of web contents which are suitable for the user's terminals in the wireless Internet environment. As a result. we are able to obtain the availability of developed execution environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.294-297
• /
• 2011

After Cloud Computing concept appeared in Google that is Internet search engine company and Famed online bookstore Amazon succeed in online rental business of computer resource, Global IT companies are watched by Cloud Computing. The companies applying Cloud Computing having been many changes, also domestic It business is throwing the spotlight on new paradigm of Cloud Computing. This paper is going to look at concept and trend of Cloud Computing, and describe situation and outlook of Cloud Computing in domestic companies.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1435-1439
• /
• 2004

Most recently, CP(Cellular Phone) has been one of the most important technologies in the IT(Information Tech-nology) field, and it is situated in a position of great importance industrially and economically. To produce the best CP in the world, a new technological concept and its advanced implementation technique is required, due to the extreme level of competition in the world market. The RT(Robot Technology) has been developed as the next generation of a future technology. Current robots require advanced technology, such as soft computing, human-friendly interface, interaction technique, speech recognition, object recognition etc. unlike the industrial robots of the past. Therefore, this paper explains conceptual research for development of the RCP(Robotic Cellular Phone), a new technological concept, in which a synergy effect is generated by the merging of IT & RT. RCP infra consists of $RCP^{Mobility}$ $RCP^{Interaction}$, $RCP^{Integration}$ technologies. For $RCP^{Mobility}$, human-friendly motion automation and personal service with walking and arming ability are developed. $RCP^{Interaction}$ ability is achieved by modeling an emotion-generating engine and $RCP^{Integration}$ that recognizes environmental and self conditions is developed. By joining intelligent algorithms and CP communication network with the three base modules, a RCP system is constructed. Especially, the RCP mobility system is focused in this paper. $RCP^{Mobility}$ is to apply a mobility technology, which is popular robot technology, to CP and combine human-friendly motion and navigation function to CP. It develops a new technological application system of auto-charging and real-world entertainment function etc. This technology can make a CP companion pet robot. It is an automation of human-friendly motions such as opening and closing of CPs, rotation of antenna, manipulation and wheel-walking. It's target is the implementation of wheel and manipulator functions that can give service to humans with human-friendly motion. So, this paper presents the definition, the basic theory and experiment results of the RCP mobility system. We confirm a good performance of the RCP mobility system through the experiment results.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3_spc
• /
• pp.295-314
• /
• 2013

These days a great mix of traditional and digital contents such as movie, broadcasting, advertisement, e-books, music, game, animation, cartoon, character, knowledge information, and art performance are widely available. Many more are yet to come, with improved quality and added features. It is expected that all these contents will be evolved into a new breed of convergence content through the process of consolidation, expansion, integration, and recreation. Across the digital ecosystem, a new formula is being added to the industrial structure : 'Information/Content-Platform/Device-Goods/Service.' In the near future, as a result of technological innovation and convergence, the business sector will lose its boundaries as well, as businesses will be forced to look beyond the product itself and focus more on multi-functionality. Especially, in the era of creative economy, more policies need to be crafted in order to procure a new growth engine for the future with the agenda for convergence between humanities and technology. Therefore, the purpose of this paper is to analyze the concept, factors, elements, types, and cases of convergence, which are the essence of content convergence. This analysis, with its focus on the convergence process, will help identify the effects and limits of content convergence as well as the prospects for convergence contents in the smart ecosystem under the creative economic system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.73-85
• /
• 2004

SIn this paper, we introduce our experience for designing and implementing new concept of a global XML-based Peer-to-Peer (P2P) engine to support various P2P applications, and interconnection among PC, Web and mobile computing environments. The proposed P2P engine can support to heterogeneous data exchanges and web interconnection by facilitating with the text-base XML while message exchange are necessary. It is also to provide multi-level security functions as well as to apply different types of security algorithms. The system consist of four modules; a message dispatcher to scheduling and filtering the message, a SecureNet to providing security services and data transmission, a Discovery Manager to constructing peer-to-peer networking, and a Repository Manager to processing data management including XML documents. As a feasibility test, we implement various P2P services such as chatting as a communication service, white-board as an authoring tool set during collaborative working, and a file system as a file sharing service. We also compared the proposed system to a Gnutella in order to measure performance of the systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.797-803
• /
• 2009

The accurate prediction of dynamic characteristics of high speed rotors, such as gas turbines, is important to avoid the possibility of operating the machinery near the critical speeds or unstable speed regions. However, the dynamic analysis methods and softwares for gas turbines have been developed in the process of producing many gas turbines by manufacturers and most of them have seldom been disclosed to the public. Recently, commercial FEM softwares, such as SAMCEF, ANSYS and NASTRAN, started supporting some rotordynamics analysis modules based on 3-D finite elements. In this paper, the dynamic analysis method using commercial S/W, especially ANSYS, is attempted for the small-size gas turbine engine rotor, and the analysis capability and limitations of its rotordyamics module are evaluated for further improvement of the module. As the preliminary procedure, the rotordyamic analysis capability of ANSYS was tested and evaluated with the reference models of the well-known dynamics. The limitations in application of the rotordynamics module were then identified. Under the current capability and limitations of ANSYS, it is shown that Lee diagram, a new frequency-speed diagram enhanced with the concept of $H{\infty}$ in rotating machinery, can be indirectly obtained from FRFs computed from harmonic response analysis of ANSYS. Finally, it is demonstrated based on the modeling and analysis method developed in the process of the S/W verification that the conventional Campbell diagram, Lee diagram, mode shapes and critical speeds of the small-size gas turbine engine rotor can be computed using the ANSYS rotordynamics module.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.36-44
• /
• 2010

The accurate prediction of dynamic characteristics of high speed rotors, such as gas turbines, is important to avoid the possibility of operating the machinery near the critical speeds or unstable speed regions. However, the dynamic analysis methods and softwares for gas turbines have been developed in the process of producing many gas turbines by manufacturers and most of them have seldom been disclosed to the public. Recently, commercial FEM softwares, such as SAMCEF, ANSYS and NASTRAN, started supporting some rotordynamics analysis modules based on 3-D finite elements. In this paper, the dynamic analysis method using commercial S/W, especially ANSYS, is attempted for the small-size gas turbine engine rotor, and the analysis capability and limitations of its rotordyamics module are evaluated for further improvement of the module. As the preliminary procedure, the rotordyamic analysis capability of ANSYS was tested and evaluated with the reference models of the well-known dynamics. The limitations in application of the rotordynamics module were then identified. Under the current capability and limitations of ANSYS, it is shown that Lee diagram, a new frequency-speed diagram enhanced with the concept of $H{\infty}$ in rotating machinery, can be indirectly obtained from FRFs computed from harmonic response analysis of ANSYS. Finally, it is demonstrated based on the modeling and analysis method developed in the process of the S/W verification that the conventional Campbell diagram, Lee diagram, mode shapes and critical speeds of the small-size gas turbine engine rotor can be computed using the ANSYS rotordynamics module.